Na3MnTi(PO4)3/C Nanofiber Free-Standing Electrode for Long-Cycling-Life Sodium-Ion Batteries
Open Access
- 5 May 2024
- journal article
- research article
- Published by MDPI AG in Nanomaterials
- Vol. 14 (9) , 804
Abstract
Self-standing Na3MnTi(PO4)3/carbon nanofiber (CNF) electrodes are successfully synthesized by electrospinning. A pre-synthesized Na3MnTi(PO4)3 is dispersed in a polymeric solution, and the electrospun product is heat-treated at 750 °C in nitrogen flow to obtain active material/CNF electrodes. The active material loading is 10 wt%. SEM, TEM, and EDS analyses demonstrate that the Na3MnTi(PO4)3 particles are homogeneously spread into and within CNFs. The loaded Na3MnTi(PO4)3 displays the NASICON structure; compared to the pre-synthesized material, the higher sintering temperature (750 °C) used to obtain conductive CNFs leads to cell shrinkage along the a axis. The electrochemical performances are appealing compared to a tape-casted electrode appositely prepared. The self-standing electrode displays an initial discharge capacity of 124.38 mAh/g at 0.05C, completely recovered after cycling at an increasing C-rate and a coulombic efficiency ≥98%. The capacity value at 20C is 77.60 mAh/g, and the self-standing electrode exhibits good cycling performance and a capacity retention of 59.6% after 1000 cycles at 1C. Specific capacities of 33.6, 22.6, and 17.3 mAh/g are obtained by further cycling at 5C, 10C, and 20C, and the initial capacity is completely recovered after 1350 cycles. The promising capacity values and cycling performance are due to the easy electrolyte diffusion and contact with the active material, offered by the porous nature of non-woven nanofibers.Keywords
This publication has 59 references indexed in Scilit:
- Realizing Three‐Electron Redox Reactions in NASICON‐Structured Na3MnTi(PO4)3 for Sodium‐Ion BatteriesAdvanced Energy Materials, 2019
- Sodium Vanadium Fluorophosphates (NVOPF) Array Cathode Designed for High‐Rate Full Sodium Ion Storage DeviceAdvanced Energy Materials, 2018
- Sodium and Sodium‐Ion Batteries: 50 Years of ResearchAdvanced Energy Materials, 2018
- Electrospun NaVPO4F/C Nanofibers as Self‐Standing Cathode Material for Ultralong Cycle Life Na‐Ion BatteriesAdvanced Energy Materials, 2017
- Improved Reversibility of Fe3+/Fe4+ Redox Couple in Sodium Super Ion Conductor Type Na3Fe2(PO4)3 for Sodium‐Ion BatteriesAdvanced Materials, 2017
- In Operando XRD and TXM Study on the Metastable Structure Change of NaNi1/3Fe1/3Mn1/3O2 under Electrochemical Sodium‐Ion IntercalationAdvanced Energy Materials, 2016
- Novel K3V2(PO4)3/C Bundled Nanowires as Superior Sodium‐Ion Battery Electrode with Ultrahigh Cycling StabilityAdvanced Energy Materials, 2015
- Correlation Between Atomic Structure and Electrochemical Performance of Anodes Made from Electrospun Carbon Nanofiber FilmsAdvanced Energy Materials, 2013
- Porous Electrode Materials for Lithium‐Ion Batteries – How to Prepare Them and What Makes Them SpecialAdvanced Energy Materials, 2012
- Sodium‐Ion BatteriesAdvanced Functional Materials, 2012