Thermographic method for very high cycle fatigue design in transportation engineering
- 10 December 2014
- journal article
- research article
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science
- Vol. 229 (7) , 1260-1270
Abstract
With the increasing progress of the technological development in the transport industry, the required fatigue life has increased, so it is very important to determine a safe fatigue strength for 109 cycles. Nowadays, the very high cycle fatigue constitutes one of the main fatigue design criteria for applications in transport industry. In this paper, the infrared thermography and an energetic approach were applied to investigate a tool steel in very high cycle fatigue regime. The traditional energetic approach was developed in order to extend it in very high cycle fatigue regime and to predict the S-N curves. The failure mechanism of the investigated steel was evaluated by means of scanning electron and optical microscopies in order to assess if the nature of microstructure and the metallurgical defects, in terms of inclusions and pores, can influence the crack initiation.Keywords
This publication has 35 references indexed in Scilit:
- Cumulative damage evaluation in multiple cycle fatigue tests taking into account energy parametersInternational Journal of Fatigue, 2013
- Very high cycle fatigue – Is there a fatigue limit?International Journal of Fatigue, 2011
- Fractographic evaluation of gigacycle fatigue crack nucleation and propagation of a high Cr alloyed cold work tool steelInternational Journal of Fatigue, 2008
- An Unifying Approach to assess the structural strengthInternational Journal of Fatigue, 2008
- Failure mechanisms of automotive metallic alloys in very high cycle fatigue rangeInternational Journal of Fatigue, 2006
- Thermographic analysis in ultrasonic fatigue testsFatigue & Fracture of Engineering Materials & Structures, 2006
- Rapid determination of the fatigue curve by the thermographic methodInternational Journal of Fatigue, 2002
- On the mechanism of fatigue failure in the superlong life regime (N>107 cycles). Part 1: influence of hydrogen trapped by inclusionsFatigue & Fracture of Engineering Materials & Structures, 2000
- Gigacycle fatigue of ferrous alloysFatigue & Fracture of Engineering Materials & Structures, 1999
- What Happens to the Fatigue Limit of Bearing Steel Without Nonmetallic Inclusions? : Fatigue Strength of Electron Beam Remelted Super Clean Bearing Steel1998