Material model of pelvic bone based on modal analysis: a study on the composite bone
Authors:
- 25 August 2016
- journal article
- research article
- Published by Springer Nature in Biomechanics and Modeling in Mechanobiology
- Vol. 16 (1) , 363-373
Abstract
Digital models based on finite element (FE) analysis are widely used in orthopaedics to predict the stress or strain in the bone due to bone–implant interaction. The usability of the model depends strongly on the bone material description. The material model that is most commonly used is based on a constant Young’s modulus or on the apparent density of bone obtained from computer tomography (CT) data. The Young’s modulus of bone is described in many experimental works with large variations in the results. The concept of measuring and validating the material model of the pelvic bone based on modal analysis is introduced in this pilot study. The modal frequencies, damping, and shapes of the composite bone were measured precisely by an impact hammer at 239 points. An FE model was built using the data pertaining to the geometry and apparent density obtained from the CT of the composite bone. The isotropic homogeneous Young’s modulus and Poisson’s ratio of the cortical and trabecular bone were estimated from the optimisation procedure including Gaussian statistical properties. The performance of the updated model was investigated through the sensitivity analysis of the natural frequencies with respect to the material parameters. The maximal error between the numerical and experimental natural frequencies of the bone reached 1.74 % in the first modal shape. Finally, the optimised parameters were matched with the data sheets of the composite bone. The maximal difference between the calibrated material properties and that obtained from the data sheet was 34 %. The optimisation scheme of the FE model based on the modal analysis data provides extremely useful calibration of the FE models with the uncertainty bounds and without the influence of the boundary conditions.Keywords
This publication has 30 references indexed in Scilit:
- Stochastic model updating—Covariance matrix adjustment from uncertain experimental modal dataMechanical Systems and Signal Processing, 2010
- Perturbation methods for the estimation of parameter variability in stochastic model updatingMechanical Systems and Signal Processing, 2008
- Structural properties of fourth-generation composite femurs and tibiasJournal of Biomechanics, 2008
- Finite element-based probabilistic analysis tool for orthopaedic applicationsComputer Methods and Programs in Biomedicine, 2007
- EXPERIMENTAL MODAL ANALYSIS ON A HUMAN SPECIMEN: LESSONS LEARNEDExperimental Techniques, 2006
- A Fully Asynchronous Multifrontal Solver Using Distributed Dynamic SchedulingSIAM Journal on Matrix Analysis and Applications, 2001
- Finite element modelling of the vibrational behaviour of the human femur using CT-based individualized geometrical and material propertiesJournal of Biomechanics, 1998
- Mechanical validation of whole bone composite femur modelsJournal of Biomechanics, 1996
- Validation of an automated method of three-dimensional finite element modelling of boneJournal of Biomedical Engineering, 1993
- An eigensystem realization algorithm for modal parameter identification and model reductionJournal of Guidance, Control, and Dynamics, 1985