Compact rf polarizer and its application to pulse compression systems
Authors:
Open Access
- 17 June 2016
- journal article
- research article
- Published by American Physical Society (APS) in Physical Review Accelerators and Beams
- Vol. 19 (6) , 062002
Abstract
We present a novel method of reducing the footprint and increasing the efficiency of the modern multi-MW rf pulse compressor. This system utilizes a high power rf polarizer to couple two circular waveguide modes in quadrature to a single resonant cavity in order to replicate the response of a traditional two cavity configuration using a 4-port hybrid. The 11.424 GHz, high-Q, spherical cavity has a 5.875 cm radius and is fed by the circularly polarized signal to simultaneously excite the degenerate modes. The overcoupled spherical cavity has a of and coupling factor () of 7.69 thus providing a loaded quality factor of with a fill time of 150 ns. Cold tests of the polarizer demonstrated good agreement with the numerical design, showing transmission of and reflection back to the input rectangular WR 90 waveguide less than over a 100 MHz bandwidth. This novel rf pulse compressor was tested at SLAC using XL-4 Klystron that provided rf power up to 32 MW and generated peak output power of 205 MW and an average of 135 MW over the discharged signal. A general network analysis of the polarizer is discussed as well as the design and high power test of the rf pulse compressor.
Keywords
Funding Information
- U.S. Department of Energy (DE-AC02-76SF00515)
This publication has 5 references indexed in Scilit:
- A New Compact High-Power Microwave Phase ShifterIEEE Transactions on Microwave Theory and Techniques, 2015
- NOVEL COMPACT WAVEGUIDE DUAL CIRCULAR POLARIZERProgress In Electromagnetics Research, 2013
- Multimoded reflective delay lines and their application to resonant delay line rf pulse compression systemsPhysical Review Special Topics - Accelerators and Beams, 2004
- Overmoded Waveguide Components for High-Power RFAIP Conference Proceedings, 2003
- Binary Peak Power Multiplier and its Application to Linear Accelerator DesignIEEE Transactions on Microwave Theory and Techniques, 1986