Preparation and Performance of a Box-Type Bending Piezoelectric Transducer
Authors:
- 4 May 2022
- journal article
- research article
- Published by Taylor & Francis in Integrated Ferroelectrics
- Vol. 225 (1) , 310-323
Abstract
Pavement-based piezoelectric power-generation technology converts mechanical energy generated by traffic loads into electricity by embedding piezoelectric transducers in the pavement. However, existing piezoelectric transducer structures are mostly the direct-impact type and the piezoelectric ceramic materials can be easily damaged. To reduce the risk of damage, a box-type bending piezoelectric energy transducer was designed and prepared in this study. The transducer is composed of 27 fixed piezoelectric sheets connected at both ends in parallel. The external casing uses a box-type structure with upper, middle and lower components. Under typical traffic load conditions, an excitation frequency of 10 Hz and displacement of 2 mm, the maximum output voltage was 30.17 V, the maximum output current was 10.01 mA and the maximum output power was 303.4 mW under load resistance of 3 kΩ. The output power of the transducer increases with loading frequency and displacement. Finally, the output power of the proposed transducer is much higher than that of existing transducers. This new piezoelectric transducer has good prospects for use in energy-generating pavement engineering applications.Keywords
This publication has 26 references indexed in Scilit:
- A sandwiched piezoelectric transducer with flex end-caps for energy harvesting in large force environmentsJournal of Physics D: Applied Physics, 2017
- Prototype of energy harvester designed for ultra-low excitation frequencyIntegrated Ferroelectrics, 2016
- Road energy harvester designed as a macro-power source using the piezoelectric effectInternational Journal of Hydrogen Energy, 2016
- Review of non-resonant vibration based energy harvesters for wireless sensor nodesJournal of Renewable and Sustainable Energy, 2016
- Piezoelectric energy harvester for public roadway: On-site installation and evaluationApplied Energy, 2016
- Continuous health monitoring of pavement systems using smart sensing technologyConstruction and Building Materials, 2016
- Experimental study and analysis of unimorph piezoelectric energy harvester with different substrate thickness and different proof mass shapesMicrosystem Technologies, 2016
- Energy Harvesting from RoadwaysProcedia Computer Science, 2016
- Piezoelectric energy harvesting from traffic-induced pavement vibrationsJournal of Renewable and Sustainable Energy, 2014
- Energy Harvesting Using a Piezoelectric “Cymbal” Transducer in Dynamic EnvironmentJapanese Journal of Applied Physics, 2004