Lipophilic rheology modifier and its application in oil‐based drilling fluids
Authors:
- 6 August 2021
- journal article
- research article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 139 (3) , 51502
Abstract
Control of rheological behavior plays an important role in the process of wellbore construction and ensure the success of drilling operation. This paper reports for the first time the use of poly‐amide (SMN) and poly‐ester (SMO) as potential rheology modifiers. Fourier transform infrared (FTIR) spectroscopy, nuclear magnetic resonance, and thermogravimetric analysis have been carried out to confirm the chemical structures and properties of SMN and SMO. The results from environmental scanning electron microscope (ESEM) illustrated that SMN and SMO are lamellar structures formed by the stacking or interpenetrating of thin sheets. The atomic force microscope test results show that the network structure is formed after dissolving rheology modifier in diesel oil. Combining with the rheology and suspension measurements, it can be determined that the addition of rheology modifier exhibited obvious influence on the viscosity, thixotropy, and settlement factor of W/O emulsion. The rheology control properties and suspension stability between two rheology modifiers and traditional rheology modifier organoclay were compared. After hot rolling at 180°C, the base mud containing organoclay exhibited excellent suspension stability, but the fluid had completely lost fluidity and consolidated into a block. For SMN and SMO addition into the base formula, the rheological parameters of base mud changed moderately and the settlement of barites was not observed after standing for 24 h.Keywords
Funding Information
- National Major Science and Technology Projects of China (2016ZX05020‐004)
- Southwest Petroleum University
This publication has 19 references indexed in Scilit:
- Effect of manufacture conditions on reverse osmosis desalination performance of polyamide thin film composite membrane and their spiral wound elementDesalination and Water Treatment, 2017
- Cuttings carrying characteristics of back-reaming pneumatic impactor exhaust during drilling operationPetroleum Exploration and Development, 2016
- Fluid filtration and rheological properties of nanoparticle additive and intercalated clay hybrid bentonite drilling fluidsJournal of Petroleum Science and Engineering, 2015
- Effects of carbon ash on rheological properties of water-based drilling fluidsJournal of Petroleum Science and Engineering, 2012
- Critical Review of Techniques and Methodologies for Characterization of Emulsion StabilityCritical Reviews in Food Science and Nutrition, 2007
- Flow and thixotropy of non-contaminating oil drilling fluids formulated with bentonite and sodium carboxymethyl celluloseJournal of Petroleum Science and Engineering, 2007
- Optimal determination of rheological parameters for Herschel–Bulkley drilling fluids and impact on pressure drop, velocity profiles and penetration rates during drillingJournal of Petroleum Science and Engineering, 2006
- Traditional and new applications for kaolin, smectite, and palygorskite: a general overviewApplied Clay Science, 2000
- Applied clay mineralogy today and tomorrowClay Minerals, 1999
- Overview — clay mineral applicationsApplied Clay Science, 1991