An 11 Gb/s 2.4 mW Half-Rate Sampling 2-Tap DFE Receiver in 6Snm CMOS
Author:
- 1 June 2007
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 272-273
Abstract
A 2-tap DFE receiver, implemented in a standard digital 65nm bulk CMOS process, is aggressively optimized for low power and area. The 0.22mW/Gbps power/speed ratio of the receiver and core area of 30μm × 40μm are achieved by using a half-rate architecture, a sampling front end, soft-decision direct feedback equalization and rail-to-rail CMOS clocking. At 11 Gb/s (2.6mA from 0.9V supply), the BER is less than 10 -14 with a PRBS7 test sequence passing through a 30" channel (15dB of loss at 5.5GHz).Keywords
This publication has 1 reference indexed in Scilit:
- A 6.4-Gb/s CMOS SerDes core with feed-forward and decision-feedback equalizationIEEE Journal of Solid-State Circuits, 2005