Corrosion Resistance of an Alternative Thermomechanically Processed Ti-23.6Nb-5.1Mo-6.7Zr Alloy for Biomedical Applications
Authors:
- Aline Raquel Vieira NunesAline Raquel Vieira Nunes
- Camila Dias dos Reis BarrosCBCamila Dias dos Reis Barros
- Gabriel Gomes CarvalhoGCGabriel Gomes Carvalho
- Pedro Turetta de SennaPedro Turetta de Senna
- Sinara BorboremaSBSinara Borborema
- Jean DilleJDJean Dille
- José Antonio Ponciano GomesJGJosé Antonio Ponciano Gomes
- Luiz Henrique de AlmeidaLuiz Henrique de Almeida
Open Access
Abstract
Metastable titanium alloys have been developed for biomedical use due to their lower elastic modulus, combined with high strength, good ductility, and excellent corrosion resistance. In this study, the electrochemical corrosion resistance of the alternative Ti-23.6Nb-5.1Mo-6.7Zr alloy was investigated. The alloy was initially homogenized at 1000 °C for 24 h and then tested under different processing conditions: 90% cold rolling; 90% cold rolling followed by annealing at 950 °C for 1 h and water quenching; and 90% cold rolling followed by aging at 300 °C, 400 °C, and 500 °C for 4 h each. Electrochemical behavior was assessed using anodic polarization, open circuit potential (OCP), and electrochemical impedance spectroscopy (EIS) tests in a synthetic solution (Ringer’s solution) to simulate body fluid. The obtained results demonstrate the stability of the passive film formed of the conventional and modified alloys, considering long-term use in the human body, regardless of the volumetric fraction and phase distribution across the various processing routes studied as β, α, α″ and ω. The electrochemical parameters, combined with Young’s modulus and hardness of the alternative alloys, enable the definition of a multicriteria selection method of the most suitable mechanical process routes to be used. The application focused on components of functional femoral stems.Keywords
Funding Information
- Fundação Carlos Chagas Filho de Amparo à Pesquisa do Estado do Rio de Janeiro (FAPERJ) (SEI-260003/019589/2022, E-26/200.947/2024, E-26/204.450/2021, E-26/204.160/2024)
This publication has 34 references indexed in Scilit:
- Design, preparation and performance research of β-type Ti-Mo-Nb-Zr alloyApplied Physics A, 2022
- Corrosion of NiCr Alloys for Dental Applications: Effects of Environment, Chemical Composition and Casting RouteJournal of Materials Engineering and Performance, 2021
- Effect of Nb addition on the stability and biological corrosion resistance of Ti-Zr alloy passivation filmsCorrosion Science, 2020
- The two faces of metal ions: From implants rejection to tissue repair/regenerationBiomaterials, 2016
- Role of ω phase in the formation of extremely refined intragranular α precipitates in metastable β-titanium alloysActa Materialia, 2016
- Metastable beta Ti-Nb-Mo alloys with improved corrosion resistance in saline solutionElectrochimica Acta, 2014
- Wear and corrosion behaviour of Ti–13Nb–13Zr and Ti–6Al–4V alloys in simulated physiological solutionCorrosion Science, 2011
- Microstructures and mechanical properties of metastable β TiNbSn alloys cold rolled and heat treatedJournal of Alloys and Compounds, 2007
- Effect of surface treatment on electrochemical behavior of CP Ti, Ti–6Al–4V and Ti–13Nb–13Zr alloys in simulated human body fluidCorrosion Science, 2006
- Effect of microstructure variations on the formation of deformation-induced martensite and associated tensile properties in a β metastable Ti alloyMetallurgical and Materials Transactions A, 2000