Synthesis, characterization, and performance analysis of carbon molecular sieve‐embedded polyethersulfone mixed‐matrix membranes for the removal of dissolved ions
- 14 March 2020
- journal article
- research article
- Published by Wiley in Water Environment Research
- Vol. 92 (9) , 1306-1324
Abstract
The asymmetric polyethersulfone (PES‐15 wt.%) mixed‐matrix membranes were prepared by incorporation of carbon molecular sieve (CMS) with varying concentrations (1, 3, and 5 wt.%). Physicochemical characterization of synthesized membranes was carried out using field emission scanning electron microscope, atomic force microscopy, contact angle, thermogravimetric analysis, zeta potential analyzer, porosity, and mean pore sizes. Performance analysis of synthesized mixed‐matrix membranes was carried out by varying the operating parameters such as pressure (2–10 bar), feed concentration (100–1,000 mg/L), and cations type (Na+, Ca2+, Mg2+, and Sn2+). Effect of operating parameters and CMS concentration was investigated on pure water flux (PWF), permeate flux, and rejection of membranes. It was found that mixed‐matrix membrane containing 15 wt.% PES with 1 wt.% CMS displayed the superior physicochemical characteristics in terms of hydrophilicity (37.9°), surface charge (−13.8 mV), mean pore diameter (6.04 nm), and thermal properties (Tg = 218.5°C), and overall performance. E5C1 membrane showed 1.5 times higher PWF (75.5 L m−2 hr−1) and incremented in rejection for all salts than the nascent membrane.Practitioner points: Carbon molecular sieve‐embedded mixed‐matrix membranes were synthesized by phase inversion method. The resultant membranes experienced improved hydrophilicity, roughness, surface charge, porosity, and mean pore diameter with 1 wt.% CMS loading. The pure water flux was improved from 55.77 to 75.05 L m−2 hr−1 when 1 wt.% CMS was added in pure PES. The observed rejection of a mixed‐matrix membrane with 1 wt.% CMS was the maximum for all salts.Keywords
Funding Information
- Ministry of Higher Education, Malaysia (0153AB-J16)
This publication has 74 references indexed in Scilit:
- Alteration of polyethersulphone membranes through UV-induced modification using various materials: A brief reviewArabian Journal of Chemistry, 2017
- Analysis of lead(II) retention from single salt and binary aqueous solutions by a polyamide nanofiltration membrane: Experimental results and modellingJournal of Membrane Science, 2013
- Fabrication of PES nanofiltration membrane by simultaneous use of multi-walled carbon nanotube and surface graft polymerization method: Comparison of MWCNT and PAA modified MWCNTSeparation and Purification Technology, 2013
- Speciation of heavy metals in the surface waters of a former tin mining catchmentChemical Speciation & Bioavailability, 2012
- Preparation and Characterization of Membranes Formed by Nonsolvent Induced Phase Separation: A ReviewIndustrial & Engineering Chemistry Research, 2011
- Removal of heavy metal ions from wastewaters: A reviewJournal of Environmental Management, 2011
- Effect of SPEEK content on the morphological and electrical properties of PES/SPEEK blend nanofiltration membranesDesalination, 2009
- Study on mechanochemical effect of silica for short grinding periodInternational Journal of Mineral Processing, 2007
- Formation and morphology studies of different polysulfones-based membranes made by wet phase inversion processJournal of Membrane Science, 2006
- Flux decline during nanofiltration of naturally-occurring dissolved organic matter: effects of osmotic pressure, membrane permeability, and cake formationJournal of Membrane Science, 2004