Delamination and Surface Roughness Analyses in Drilling Hybrid Carbon/Glass Composite
Authors:
- 24 July 2015
- journal article
- research article
- Published by Taylor & Francis in Materials and Manufacturing Processes
- Vol. 31 (10) , 1366-1376
Abstract
Previous attempts at drilling of fibrous composites have been challenging due to the limited mechanical properties and presence of severe delamination damage at the top and bottom surfaces of the drilled hole. With the recent introduction of hybrid carbon/glass fiber reinforced polymer (HFRP) composites in both research literature and industrial applications, the need for evaluating their drillability is inevitable prior to their final usage. This is mainly because of the unique properties of HFRP composites as compared to the single-type FRP composites. Therefore, this paper aims to present a research initiative that will elucidate the high-range parametric effects of drilling control factors on delamination damage and surface quality. Taguchi methodology and statistical analysis of variance were applied to determine the performance of the drilling process. Experimental results revealed that delamination damage and surface quality values were strongly influenced by the feed and special tool geometries rather than the spindle rotational speed. Changes in the feed are likely to contribute to increase in the thrust force and strain rate on the workpiece. Confirmation tests have shown the closeness of the calculated values via a regression model and additive rule with the experimental values. This indicates that the regression model from the response surface can be employed to estimate delamination damage and surface roughness during drilling of HFRP composite.Keywords
Funding Information
- Ministry of Higher Education, Malaysia (RAGS/9018-00019)
This publication has 34 references indexed in Scilit:
- Evaluation of Mechanical Properties of Hybrid Fiber Reinforced Polymer Composites and their ArchitectureProcedia Manufacturing, 2015
- Experimental study of surface quality and damage when drilling unidirectional CFRP compositesJournal of Materials Research and Technology, 2014
- Performance Evaluations of Carbon/Glass Hybrid Polymer CompositesAdvanced Materials Research, 2014
- Flexural and tensile strengths of unidirectional hybrid epoxy composites reinforced by S-2 glass and T700S carbon fibresMaterials & Design (1980-2015), 2014
- Hybrid composites made of carbon and glass woven fabrics under quasi-static loadingMaterials & Design (1980-2015), 2011
- Fibre reinforced composites in aircraft constructionProgress in Aerospace Sciences, 2005
- Taguchi analysis of delamination associated with various drill bits in drilling of composite materialInternational Journal of Machine Tools and Manufacture, 2004
- Study of delamination in drilling carbon fiber reinforced plastics (CFRP) using design experimentsComposite Structures, 2003
- Failure of delaminated interply hybrid composite plates under compressionComposites Science and Technology, 2001
- Carbon fibre and glass fibre hybrid reinforced plasticsComposites, 1978