Post-buckling of network arch bridges subjected to vertical loads
- 22 June 2020
- journal article
- research article
- Published by Taylor & Francis in Structure and Infrastructure Engineering
- Vol. 17 (7) , 941-959
Abstract
Bridges in service may experience accidental actions, which may alter their structural integrity. Bracing systems are provided along the arch to reduce the risk of damage or failure. In this work, the post-buckling response of a generic network arch bridge has been investigated throughout an intensive finite element analysis. Initially, a buckling analysis was carried out on the steel bridge to find out the critical live loads underlining the influence of the geometrical non-linearity of the arch on the critical overload. Then, the description of the out-of-plane structural response of the steel arches under vertical loads was presented and finally, the lateral capacity of the arch after the accidental cable loss scenario was investigated. As a result of these studies, some interesting observations were made. The critical live loads are strongly influenced by the geometrical nonlinearity of the steel arch. Besides, the non-braced arch bridges exhibit the out-of-plane behaviour identical to that of an isolated arch.Keywords
This publication has 23 references indexed in Scilit:
- A moving mesh FE methodology for vehicle–bridge interaction modelingMechanics of Advanced Materials and Structures, 2018
- Out-Plane Elastic-Plastic Buckling Strength of High-Strength Steel ArchesJournal of Structural Engineering, 2018
- Seismic and Robustness Design of Steel Frame BuildingsKey Engineering Materials, 2018
- Modeling of gravity-designed RC sub-assemblages subjected to lateral loadsEngineering Structures, 2017
- Robustness assessment approaches for steel framed structures under catastrophic eventsComputers & Structures, 2015
- Buckling design of steel tied-arch bridgesJournal of Constructional Steel Research, 2014
- Dynamic Analysis of Cable-Stayed Bridges Affected by Accidental Failure Mechanisms under Moving LoadsMathematical Problems in Engineering, 2013
- Out-of-plane stability of roller bent steel arches — An experimental investigationJournal of Constructional Steel Research, 2013
- Dynamic Mode I and Mode II Crack Propagation in Fiber Reinforced CompositesMechanics of Advanced Materials and Structures, 2009
- Computation of Energy Release Rate and Mode Separation in Delaminated Composite Plates by Using Plate and Interface VariablesMechanics of Advanced Materials and Structures, 2005