Enhanced Electrical Conductivity in Extruded Single-Wall Carbon Nanotube Wires from Modified Coagulation Parameters and Mechanical Processing
Authors:
- Andrew R. BucossiABAndrew R. Bucossi
- Cory D. CressCCCory D. Cress
- Christopher M. SchauermanCSChristopher M. Schauerman
- Jamie E. RossiJRJamie E. Rossi
- Ivan PuchadesIPIvan Puchades
- Brian J. LandiBLBrian J. Landi
- 25 November 2015
- journal article
- research article
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 7 (49) , 27299-27305
Abstract
Single-wall carbon nanotubes (SWCNTs) synthesized via laser vaporization have been dispersed using chlorosulfonic acid (CSA) and extruded under varying coagulation conditions to fabricate multifunctional wires. The use of high purity SWCNT material based upon established purification methods yields wires with highly aligned nanoscale morphology and an over 4× improvement in electrical conductivity over as-produced SWCNT material. A series of eight liquids have been evaluated for use as a coagulant bath, and each coagulant yielded unique wire morphology based on its interaction with the SWCNT-CSA dispersion. In particular, dimethylacetamide as a coagulant bath is shown to fabricate highly uniform SWCNT wires, and acetone coagulant baths result in the highest specific conductivity and tensile strength. A 2× improvement in specific conductivity has been measured for SWCNT wires following tensioning induced both during extrusion via increased coagulant bath depth and during solvent evaporation via mechanical strain, over that of as-extruded wires from shallower coagulant baths. Overall, combination of the optimized coagulation parameters has yielded acid-doped wires with the highest reported room temperature electrical conductivities to date of 4.1–5.0 MS/m and tensile strengths of 210–250 MPa. Such improvements in bulk electrical conductivity can impact the adoption of metal-free, multifunctional SWCNT materials for advanced cabling architectures.Keywords
Funding Information
- U.S. Department of Energy
- U.S. Government
- Office of Naval Research (N00014-15-1-2720)
This publication has 21 references indexed in Scilit:
- Electrical Properties of Carbon Nanotube Based Fibers and Their Future Use in Electrical WiringAdvanced Functional Materials, 2014
- Coaxial cables with single-wall carbon nanotube outer conductors exhibiting attenuation/length within specificationMicro & Nano Letters, 2012
- Evaluation of Crimping as a Termination Technique for Carbon Nanotube Macro-Structures2012
- High-Performance, Lightweight Coaxial Cable from Carbon Nanotube ConductorsACS Applied Materials & Interfaces, 2012
- Carbon nanotube wires and cables: Near-term applications and future perspectivesNanoscale, 2011
- Electrical Connectivity in Single-Walled Carbon Nanotube NetworksNano Letters, 2009
- Reversibility, Dopant Desorption, and Tunneling in the Temperature-Dependent Conductivity of Type-Separated, Conductive Carbon Nanotube NetworksACS Nano, 2008
- Transparent Conductive Single-Walled Carbon Nanotube Networks with Precisely Tunable Ratios of Semiconducting and Metallic NanotubesACS Nano, 2008
- Low-temperature resistance of individual single-walled carbon nanotubes: A theoretical estimationApplied Physics Letters, 2001
- Synthesis, integration, and electrical properties of individual single-walled carbon nanotubesApplied Physics A, 1999