A comparison study of DTSCR by TCAD and VFTLP for CDM ESD protection
- 1 July 2017
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-4
Abstract
This paper reports a study of transient behaviors of diode-triggered silicon-controlled rectifier (DTSCR) electrostatic discharging (ESD) protection structures for ultra-fast Charged Device Model (CDM) ESD protection. The DTSCR ESD protection structures, fabricated in a 28nm CMOS process, were characterized using a new combined Very Fast Transmission Line Pulse (VFTLP) testing and TCAD simulation approach, which resolves the deficiency problem of VFTLP testing due to the effects of ultra-short duration of CDM ESD pulse waveforms. The result reveals critical difference of DTSCR behaviors under VFTLP and real CDM ESD that gives a better evaluation of overshooting, turn-on time, turn-on delay, etc.Keywords
This publication has 6 references indexed in Scilit:
- A Systematic Study of ESD Protection Co-Design With High-Speed and High-Frequency ICs in 28 nm CMOSIEEE Transactions on Circuits and Systems I: Regular Papers, 2016
- Concurrent Design Analysis of High-Linearity SP10T Switch With 8.5 kV ESD ProtectionIEEE Journal of Solid-State Circuits, 2014
- CDM ESD failure modes and VFTLP testing for protection evaluation2008
- Characterizing the transient device behavior of SCRs by means of VFTLP waveform analysis2007
- A Review on RF ESD Protection DesignIEEE Transactions on Electron Devices, 2005
- A mixed-mode esd protection circuit simulation-design methodologyIEEE Journal of Solid-State Circuits, 2003