Effect of Direct Reduced Iron Proportion on Softening–Melting–Dripping Behavior of Mixed Burdens
Open Access
Abstract
Charging direct reduced iron (DRI) into a blast furnace alters the softening–melting–dripping behavior of mixed burdens; however, the influencing laws and mechanisms remain unclear. In this study, DRI, pellets, and sinter were used as raw materials to systematically investigate the effect of DRI proportion (0–40%) on the softening–melting–dripping behavior of mixed burdens, and the underlying mechanism was revealed by combining XRD, SEM-EDS, and FactSage thermodynamic simulation. The results show that with increasing DRI proportion, the softening–melting behavior of the mixed burden exhibits a regular variation: the softening start temperature decreases, the softening interval widens, and the melting–dripping interval narrows due to an increase in melting start temperature and a decrease in dripping temperature, indicating an overall improvement in softening–melting–dripping performance. Meanwhile, the maximum pressure difference and total characteristic value decrease by 73.3% and 85.2%, respectively, indicating markedly improved permeability of the burden layer. Moreover, the addition of DRI promotes deep reduction of the mixed burden, leading to a decrease in FeO content. FactSage calculations show that the onset temperature of liquid slag formation decreases, and the equilibrium liquid slag fraction at the maximum pressure-difference temperature decreases. The decrease in basicity combined with FeO fluxing leads to a lower softening start temperature, while reduced primary slag formation and the supporting effect of the DRI metallic skeleton jointly improve bed permeability.Keywords
Funding Information
- Key Technologies Research and Development Program of Guangdong Province (2025B0101020002)
This publication has 41 references indexed in Scilit:
- Effect of Basicity on the Melting Characteristics, Phase Transformation Behavior, and Heat Release of Blast Furnace SlagSteel Research International, 2026
- Sticking and Swelling of Iron Ore Pellets: Mechanisms and Controlling FactorsJournal of Sustainable Metallurgy, 2025
- A Comparison Between the Reduction Behavior of DRI and BF Pellets in H2 and CO AtmospheresJournal of Sustainable Metallurgy, 2024
- The Low‐Carbon Production of Iron and Steel Industry Transition Process in ChinaSteel Research International, 2023
- Softening and melting behaviors of ferrous burden in hydrogen-rich blast furnace cohesive zoneJournal of Iron and Steel Research International, 2023
- Thermodynamic analysis and experimental verification of the direct reduction of iron ores with hydrogen at elevated temperatureJournal of Materials Science, 2022
- Carbon Footprint and Energy Transformation Analysis of Steel Produced via a Direct Reduction Plant with an Integrated Electric Melting UnitJournal of Sustainable Metallurgy, 2022
- Driving investments in ore beneficiation and scrap upgrading to meet an increased demand from the direct reduction-EAF routeMineral Economics, 2021
- A Thermodynamic Model Toward the Comprehension of Ferrous Burden Softening and Melting Using FactSage Macro-ProcessingMetallurgical and Materials Transactions B, 2019
- Role of Scrap Recycling for CO2 Emission Reduction in Steel Plant: A Model Based ApproachSteel Research International, 2019