Sintering of Ag paste for power devices die attach on Cu surfaces
Authors:
- 1 December 2014
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 94-98
Abstract
The die-attach layer is one of the most critical elements for high-temperature power electronics applications. The increase in operating temperature requires new materials with higher melting points and suitable thermo-mechanical properties. Among the possible solutions, sintering of Ag pastes (nanoparticles, nanoflakes and particles near the nanosize range) is an interesting method, because it requires moderate (<;300°C) processing temperatures. These lower processing temperatures are suitable for implementation in mass manufacturing and the equipment for doing so are readily available. The aim of this write-up is to detail the qualification efforts being done on the Ag sinter solutions, in particular on copper (Cu) surfaces. The literature work will cover reliability and manufacturing concerns which are of primary interest to the general engineering community. These concerns must be addressed from several view points; design, processability and equipment. The outlook for implementation of this technology is bright and is in-line with the lead free initiative being addressed by the RoHS and WEEE directives for power devices.Keywords
This publication has 10 references indexed in Scilit:
- Are Sintered Silver Joints Ready for Use as Interconnect Material in Microelectronic Packaging?Journal of Electronic Materials, 2014
- Chip-Bonding on Copper by Pressureless Sintering of Nanosilver Paste Under Controlled AtmosphereIEEE Transactions on Components, Packaging and Manufacturing Technology, 2014
- Die Attach Materials for High Temperature Applications: A ReviewIEEE Transactions on Components, Packaging and Manufacturing Technology, 2011
- Advanced packaging yields higher performance and reliability in power electronicsMicroelectronics Reliability, 2010
- Die-attachment solutions for SiC power devicesMicroelectronics Reliability, 2009
- High-Temperature Operation of SiC Power Devices by Low-Temperature Sintered Silver Die-AttachmentIEEE Transactions on Advanced Packaging, 2007
- The squeezing process of complex epoxy patterns in the die-attaching of large IC-chip2006
- Low-Temperature Sintered Nanoscale Silver as a Novel Semiconductor Device-Metallized Substrate Interconnect MaterialIEEE Transactions on Components and Packaging Technologies, 2006
- Silicon-carbide (SiC) semiconductor power electronics for extreme high-temperature environments2004
- Pressure-assisted low-temperature sintering of silver paste as an alternative die-attach solution to solder reflowIEEE Transactions on Electronics Packaging Manufacturing, 2002