Film uniformity and sputter deposition rate are found to depend upon the crystallographic orientation of the sputtering target. Improvements in film uniformity from ±10% to ±5% on a 125-mm silicon wafer are achieved by controlling the target metal working process so that an optimum crystallographic orientation is maintained in the target. A Monte Carlo computer simulation of the crystallographic effect is described and used to calculate coating uniformity curves for a uniformly emitting disk and a conical magnetron sputtering source. These results are compared to experimental data obtained with a conical magnetron sputter deposition source equipped with aluminum alloy targets fabricated with radically different crystallographic orientations. Excellent agreement is obtained between the Monte Carlo simulations based upon the measured target crystallographic orientation and the measured uniformity curves. The target crystallographic orientation is established using direct x-ray pole figures.