The underestimated charge storage capability of carbon cathodes for advanced alkali metal-ion capacitors
- 28 May 2019
- journal article
- research article
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 11 (24) , 11445-11450
Abstract
Li-ion capacitors (LICs) are emerging as complementary energy storage devices to Li-ion batteries to satisfy some specific applications where high power density and long cycle life are required. Due to the wide usage of LICs, LICs with promising energy density are urgently needed; however, at this stage, the achievement of this type of LICs is the main challenge. In this study, we increased the energy density of LICs via both material optimization and charge storage mechanism exploration. Moreover, porous carbon with a high surface area of over 2800 m2 g−1 was fabricated from alkali lignin via a traditional KOH activation method assisted by self-activation. A wide voltage window of 1.0–4.8 V was applied where the synergistic storage of anions and cations was achieved. This shows that a deep discharge down to 1.0 V is necessary for the complete desorption of anions, which also triggers the adsorption of cations (Li+), resulting in increased capacity. However, a compromise must be made in the energy efficiency due to intensified battery polarization upon deep discharging. Furthermore, considering the natural abundance of sodium and potassium over lithium, Na- and K-ion capacitors have been investigated for sustainable development using the as-prepared carbon materials.Keywords
Funding Information
- Hong Kong Polytechnic University (Grant 1-ZE83)
- Innovation and Technology Commission (ITF Project ITS/029/17)
This publication has 30 references indexed in Scilit:
- Review of Hybrid Ion Capacitors: From Aqueous to Lithium to SodiumChemical Reviews, 2018
- Nanostructured Anode Materials for Non‐aqueous Lithium Ion Hybrid CapacitorsEnergy & Environmental Materials, 2018
- Latest advances in supercapacitors: from new electrode materials to novel device designsChemical Society Reviews, 2017
- High Energy and High Power Lithium‐Ion Capacitors Based on Boron and Nitrogen Dual‐Doped 3D Carbon Nanofibers as Both Cathode and AnodeAdvanced Energy Materials, 2017
- A novel high energy hybrid Li-ion capacitor with a three-dimensional hierarchical ternary nanostructure of hydrogen-treated TiO2 nanoparticles/conductive polymer/carbon nanotubes anode and an activated carbon cathodeJournal of Power Sources, 2017
- Graphene Carbon Nanotube Carpets Grown Using Binary Catalysts for High-Performance Lithium-Ion CapacitorsACS Nano, 2017
- A Quasi‐Solid‐State Li‐Ion Capacitor Based on Porous TiO2 Hollow Microspheres Wrapped with Graphene NanosheetsSmall, 2016
- Asymmetric capacitors using lignin-based hierarchical porous carbonsJournal of Power Sources, 2016
- Effect of hydrogenation on performance of TiO2(B) nanowire for lithium ion capacitorsElectrochemistry Communications, 2015
- Studies on Supercapacitor Electrode Material from Activated Lignin-Derived Mesoporous CarbonLangmuir, 2014