Study on Mechanical Properties of Polyurethane Cross-Linked P(E-co-T)/PEG Blended Polyether Elastomer
Open Access
Abstract
To improve the mechanical properties of polyurethane cross-linked poly (ethylene oxide-co-tetrahydrofuran) (P(E-co-T)) elastomers at room temperature, using poly (ethylene oxide-co-tetrahydrofuran) and high-molecular-weight polyethylene glycol (PEG) as raw materials and polyisocyanate N100 as curing agent, a series of polyurethane cross-linked blended polyether elastomers were prepared by changing the elastomer-curing parameter R value (n(-NCO)/n(-OH)) and P(E-co-T)/PEG ratio. Equilibrium swelling measurements showed that the chemical cross-linkage of the elastomers tended to decrease with the decreasing R value, the average molecular weight (Mc) of the network chain increased, and the density of the network chain (N0) decreased. Wide-angle X-ray diffraction (WAXD) and differential scanning calorimetry (DSC) tests showed that PEG chain segments within the elastomers crystallized at room temperature, while the crystallinity increased with decreasing R value and increasing PEG content. The mechanical property tests showed that the elongation at break tended to decrease with increasing R value; the tensile strength first increased and then decreased. At R value 0.9, the elastomer presented good comprehensive mechanical properties. In addition, the mechanical properties of polyurethane cross-linked P(E-co-T)/PEG blended polyether elastomer showed an increasing trend with the increase in PEG content when the curing parameter of 0.9 remained unchanged.Keywords
Funding Information
- National Natural Science Foundation of China (51473022, 61407200114)
- Pre-research Field Fund (51473022, 61407200114)
This publication has 40 references indexed in Scilit:
- Thermal performance and crystallization behavior of poly(ethylene glycol) hexadecyl ether in confined environmentPolymer International, 2013
- Polyurethanes: Versatile Materials and Sustainable Problem Solvers for Today’s ChallengesAngewandte Chemie International Edition, 2013
- Nonisothermal crystallization behavior of the poly(ethylene glycol) block in poly(L‐lactide)–poly(ethylene glycol) diblock copolymers: Effect of the poly(L‐lactide) block lengthJournal of Polymer Science Part B: Polymer Physics, 2006
- The effect of molecular weight on the crystallization kinetics and equilibrium melting temperature of poly(tetramethylene ether glycol)Polymers for Advanced Technologies, 2006
- Melting behaviors and isothermal crystallization kinetics of poly(ethylene terephthalate)/mesoporous molecular sieve compositePolymer, 2005
- Highly Softened Polyurethane Elastomer Synthesized with Novel 1,2-Bis(isocyanate)ethoxyethaneMacromolecules, 2004
- Melting behaviors, isothermal and non-isothermal crystallization kinetics of nylon 1212Polymer, 2003
- Modification of the phase stability of polymer blends by fillersPolymer, 2000
- Characterization of network structure of poly(glycidyl azide) elastomers by swelling, solubility and mechanical measurementsPolymer, 1998
- Thermal behaviour of poly(ethylene oxide) as revealed by differential scanning calorimetryPolymer, 1980