Effect of gradient structure on additively manufactured auxetic and hybrid auxetic structure for energy absorption applications
- 14 February 2023
- journal article
- research article
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications
- Vol. 237 (8) , 1739-1751
Abstract
Additive manufacturing is the most widely used approach to fabricating cellular structures. Research interests in auxetics are increasing due to their unique properties like impact energy absorption. In this work, a novel approach to enhance the mechanical properties of auxetics is proposed. A hybrid auxetic structure is proposed that is the combination of a re-entrant and a conventional honeycomb unit cell. A uniaxial quasi-static compression study is carried out on auxetics and hybrid auxetic structures loaded along the x and y directions. The deformation patterns of the structures are discussed to understand the failure modes. The results showed that the hybrid structure possesses better compressive strength and specific energy absorption than the auxetic structure. Experimental results are closely matching with numerical results. Subsequently, the deformation mode is discussed to understand the structural failure.Keywords
This publication has 35 references indexed in Scilit:
- Mechanical characterization of 3D-printed polymersAdditive Manufacturing, 2018
- Mechanical properties and water absorption of surface modified ABS 3D printed by fused deposition modellingRapid Prototyping Journal, 2018
- Design and modeling of auxetic and hybrid honeycomb structures for in-plane property enhancementMaterials & Design, 2017
- Anisotropic mechanical properties of fused deposition modeled parts fabricated by using acrylonitrile butadiene styrene polymerJournal of Polymer Engineering, 2017
- Three Decades of Auxetics Research − Materials with Negative Poisson's Ratio: A ReviewAdvanced Engineering Materials, 2016
- Design optimization of a novel NPR crash box based on multi-objective genetic algorithmStructural and Multidisciplinary Optimization, 2016
- Mechanical properties of 3D re-entrant honeycomb auxetic structures realized via additive manufacturingInternational Journal of Solids and Structures, 2015
- Impact resistance of uniform and functionally graded auxetic double arrowhead honeycombsInternational Journal of Impact Engineering, 2015
- Metamaterials with Negative Poisson’s Ratio: A Review of Mechanical Properties and Deformation Mechanisms2015
- Failure analysis and Taguchi design of auxetic recycled rubber structuresPhysica Status Solidi (b), 2014