Compact Electrothermal Reliability Modeling and Experimental Characterization of Bipolar Latchup in SiC and CoolMOS Power MOSFETs
- 7 January 2015
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 30 (12) , 6978-6992
Abstract
In this paper, a compact dynamic and fully coupled electrothermal model for parasitic BJT latchup is presented and validated by measurements. The model can be used to enhance the reliability of the latest generation of commercially available power devices. BJT latchup can be triggered by body-diode reverse-recovery hard commutation with high dV/dt or from avalanche conduction during unclamped inductive switching. In the case of body-diode reverse recovery, the base current that initiates BJT latchup is calculated from the solution of the ambipolar diffusion equation describing the minority carrier distribution in the antiparallel p-i-n body diode. For hard commutation with high dV/dt, the displacement current of the drain-body charging capacitance is critical for BJT latchup, whereas for avalanche conduction, the base current is calculated from impact ionization. The parasitic BJT is implemented in Simulink using the Ebers-Moll model and the temperature is calculated using a thermal network matched to the transient thermal impedance characteristic of the devices. This model has been applied to CoolMOS and SiC MOSFETs. Measurements show that the model correctly predicts BJT latchup during reverse recovery as a function of forward-current density and temperature. The model presented, when calibrated correctly by device manufacturers and applications engineers, is capable of benchmarking the robustness of power MOSFETs.Keywords
Funding Information
- Engineering and Physical Sciences Research Council
- Jaguar Land Rover Automotive PLC and EPSRC (EP/L007010/1)
- components theme research project (EP/K034804/1)
This publication has 31 references indexed in Scilit:
- Characterization and Scalable Modeling of Power Semiconductors for Optimized Design of Traction Inverters with Si- and SiC-DevicesIEEE Transactions on Power Electronics, 2013
- Efficiency Impact of Silicon Carbide Power Electronics for Modern Wind Turbine Full Scale Frequency ConverterIEEE Transactions on Industrial Electronics, 2010
- Power PiN diode model for PSPICE simulations2005
- Characterization and Modeling of Three-Terminal Heterojunction Phototransistors Using an InGaP Layer for PassivationIEEE Transactions on Electron Devices, 2005
- The use of a formal optimisation procedure in automatic parameter extraction of power semiconductor devices2003
- Semiempirical model of carrier mobility in silicon carbide for analyzing its dependence on temperature and doping levelSemiconductors, 2001
- Measurement of the BJT activation current during the reverse recovery of power MOSFET's drain-source diodeIEEE Transactions on Electron Devices, 2001
- Experimental and numerical investigation on MOSFET's failure during reverse recovery of its internal diodeIEEE Transactions on Electron Devices, 1999
- Computer modeling of diode forward recovery characteristicsIEEE Transactions on Electron Devices, 1982
- Large-signal nonlinear analysis of a high-power high-frequency junction transistorIEEE Transactions on Electron Devices, 1970