Nonisothermal and Productivity Behavior of High-Pressure Reservoirs
Author:
- 5 November 2009
- journal article
- Published by Society of Petroleum Engineers (SPE) in SPE Journal
- Vol. 15 (01) , 50-63
Abstract
Summary: High-pressure, low-permeability reservoirs have been encountered in various parts of the world within the past few years. Commercial development of these reservoirs may require operating wells with high drawdown pressures, possibly in excess of 6,000 psi. The effects of drawdown pressures in this range are increases in nearwellbore temperatures because of Joule-Thomson expansion of the reservoir fluids and significant reductions in oil viscosity. The effects of high drawdown pressures are evaluated with a transient, singlephase thermal simulator in which the oil viscosity is modeled as both temperature and pressure dependent and Joule-Thomson expansion and viscous dissipation effects are considered. Results indicate near-wellbore temperature increases of 4 to 28°F for drawdowns between 2,000 to 10,000 psi because of Joule-Thomson expansion of the reservoir oil and connate water. Furthermore, if oil viscosity is not modeled as pressure dependent, skin values from well tests and productivity indices will be underpredicted. Temperature profiles within the formation are presented for a range of rates and drawdowns. Technical rationale is also presented to explain the transient heating or cooling phenomena that occur immediately after a rate change. Synthetic well tests are generated to illustrate the effect of high drawdown on well test interpretation. These tests show a region of improved mobility in the near-wellbore region because of the reduction in the oil viscosity.Keywords
This publication has 14 references indexed in Scilit:
- Prediction of Temperature Changes Caused by Water or Gas Entry into a Horizontal WellSPE Production & Operations, 2007
- Flow Profiling by Distributed Temperature Sensor (DTS) System—Expectation and RealitySPE Production & Operations, 2006
- Use of Pressure Transient Testing To Identify Reservoir Damage Problems1992
- Determination of Virgin Rock Temperature From Drillstem TestsJournal of Petroleum Technology, 1991
- An Analytical Study of Interference in Composite ReservoirsSociety of Petroleum Engineers Journal, 1985
- Heat conduction in multiphase systems—IChemical Engineering Science, 1985
- Application of the Time-Dependent Overall Heat-Transfer Coefficient Concept to Heat-Transfer Problems in Porous MediaSociety of Petroleum Engineers Journal, 1984
- Analytical Definition Of The Overall Heat Transfer Coefficient1979
- The Importance of Joule-Thomson Heating (or Cooling) in Temperature Log Interpretation1973
- Pressure Behavior of a Limited Circular Composite ReservoirSociety of Petroleum Engineers Journal, 1966