Influencing Factors of Void closure in Skew-Rolled Steel Balls Based on the Floating-Pressure Method
Open Access
Abstract
Due to the instable conditions caused by the wear of rollers, macro voids inevitably occur in skew rolling steel balls. Macro voids in rolled balls greatly weakens the mechanical properties, resulting in the scrapping of about 23% of all skew rolling balls. This paper adopts the floating-pressure method (FPM) to eliminate macro voids in rolled steel balls, and mainly focuses on the investigation of the influencing factor void closure in skew-rolled balls. The research contents are listed as follows: Firstly, the mechanical model of FPM eliminating void in rolled steel balls is established, and the theoretical relationship between influencing factors of void closure is obtained. Then, the metal flow behaviors, the stress distribution and the effect of process parameters on void closure are revealed by numerical analysis. Subsequently, based on the uniform design method, the prediction equation of the required temperature and air pressure for compacting various inferior rolled balls with different diameter by FPM is deduced. Finally, the FPM experiment is carried out to verify the results of numerical analysis. The research results provide theoretical guidance for eliminating macro voids in skew-rolled steel balls.Keywords
Funding Information
- National Natural Science Foundation of China (51475247)
- Natural Science Foundation of Zhejiang Province (LZ17E050001)
This publication has 13 references indexed in Scilit:
- Closure laws of void in the core of cross wedge rolling shaft based on the floating-pressure methodThe International Journal of Advanced Manufacturing Technology, 2018
- Rolling of metal ballsSteel in Translation, 2017
- Numerical analysis of helical rolling processes for producing steel ballsInternational Journal of Materials and Product Technology, 2016
- Void closure criteria for hot metal forming: A reviewJournal of Manufacturing Processes, 2015
- FEM Analysis of Helical Rolling of Steel BallsKey Engineering Materials, 2013
- Experimental and numerical analysis of helical-wedge rolling process for producing steel ballsInternational Journal of Machine Tools and Manufacture, 2013
- Numerical Simulation of Al Ball Forming Process in Skew RollingMaterials Science Forum, 2011
- Optimization of Pass Parameters on Two-Grooves Skew Rolling for Al BallKey Engineering Materials, 2009
- A criterion for void closure in large ingots during hot forgingJournal of Materials Processing Technology, 2009
- The surface geometry of rollers with skew rolling of steel ballsProceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 2001