Study on the Parameters of Strengthening Soft Surrounding Rock by Electric Pulse Grouting in the Mining Face
Open Access
- 27 January 2023
- journal article
- research article
- Published by MDPI AG in Sustainability
- Vol. 15 (3) , 2314
Abstract
As an effective measure for the rapid fracturing of coal and rock, electric pulse fracture technology has been successfully applied in oil extraction and natural gas discharge. Using the electric pulse fracture mechanism, this technology can be applied to grouting reinforcement to improve the infiltration efficiency of grouting. In this study, we used a numerical simulation method to establish numerical models with different electric pulse peak pressures, different grouting times and different drilling spacing conditions Through numerical simulation studies, we found that the influence range of grouting reinforcement grows with the increased maximum pressure generated by the electrical pulse. The most economical and reasonable electric pulse parameter setting is 5 MPa for static grouting pressure and 100 MPa for peak electric pulse pressure. The best grouting time to keep pressure in the borehole is determined as 9 h, and the best borehole interval is 10 m. In addition, through the treatment of the soft roof of the Caojiashan coal mine, we also found that the reinforcement sample within the grouting reinforcement range had a compressive strength of more than 1.1 MPa; after each grouting reinforcement was completed, the hydraulic bracket could advance 12 m each time, which shows that the electric pulse grouting reinforcement technology has an obvious effect on the treatment of soft roof slab.Keywords
Funding Information
- National Natural Science Foundation of China (42102222)
This publication has 27 references indexed in Scilit:
- Damage characteristics and laws of micro-crack of underwater electric pulse fracturing coal-rock massTheoretical and Applied Fracture Mechanics, 2021
- Mechanism analysis and control technology of surrounding rock failure in deep soft rock roadwayEngineering Failure Analysis, 2020
- The Formation of Three-Dimensional Unipolar Pulses upon Motion of Charges in a VacuumOptics and Spectroscopy, 2020
- Location optimize of press-pack IGBT chip2019
- A Predictor-Corrector Method for Power System Variable Step Numerical SimulationIEEE Transactions on Power Systems, 2019
- TEACHING CHEMICAL ENGINEERING USING COMSOL MULTIPHYSICSINTED Proceedings, 2019
- Electric Area of an Extremely Short Pulse and Moment of ForceOptics and Spectroscopy, 2018
- Study on repair control technology of soft surrounding rock roadway and its applicationEngineering Failure Analysis, 2018
- Experimental Study on the Reinforcement Mechanism of Segmented Split Grouting in a Soft Filling MediumProcesses, 2018
- Failure of bolt support and experimental study on the parameters of bolt-grouting for supporting the roadways in deep coal seamEngineering Failure Analysis, 2017