Use of polypropylene fibers coated with nano-silica particles into a cementitious mortar
- 1 January 2015
- conference paper
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 1693, 020056
Abstract
Fiber reinforced cementitious composite (FRCC) materials have been widely used during last decades in order to overcome some of traditional cementitious materials issues: brittle behaviour, fire resistance, cover spalling, impact strength. For composite materials, fiber/matrix bond plays an important role because by increasing fiber/matrix interactions is possible to increase the behaviour of the entire material. In this study, in order to improve fiber to matrix adhesion, two chemical treatments of polypropylene fibers were investigated: alkaline hydrolysis and nano-silica sol-gel particles deposition. Treatmtents effect on fibers morphology and mechanical properties was investigated by scanning electron microscopy (SEM) and tensile tests. SEM investigations report the presence of spherical nano-silica particles on fiber surface, in the case of sol-gel process, while alkaline hydrolysis leads to an increase of fibers roughness. Both treatments have negligible influence on fibers mechanical properties confirming the possibility of their use in a cementitious mortar. Pullout tests were carried out considering three embedded length of fibers in mortar samples (10, 20 and 30 mm, respectively) showing an increase of pullout energy for treated fibers. The influence on fiber reinforced mortar mechanical properties was investigated by three-point flexural tests on prismatic specimens considering two fibers length (15 and 30 mm) and two fibers volume fractions (0.50 and 1.00 %). A general increase of flexural strength over the reference mix was achieved and an overall better behaviour is recognizable for mortars containing treated fibers.Keywords
This publication has 12 references indexed in Scilit:
- Surface treated polypropylene (PP) fibres for reinforced concreteCement and Concrete Research, 2013
- Microstructure of interfacial transition zone between pet fibres and cement pasteActa Geodynamica et Geomaterialia, 2013
- Performance evaluation of a polypropylene-based draw-wired fibre for concrete structuresConstruction and Building Materials, 2012
- Synthesis of Silica Nanoparticles by Ultrasound‐Assisted Sol‐Gel Method: Optimized by Taguchi Robust DesignChemical Engineering & Technology, 2011
- Experimental study of the thermo-mechanical properties of recycled PET fiber-reinforced concreteComposite Structures, 2011
- Nanotechnology: Advantages and drawbacks in the field of construction and building materialsConstruction and Building Materials, 2011
- Effects of the geometry of recycled PET fiber reinforcement on shrinkage cracking of cement-based compositesComposites Part B: Engineering, 2008
- Material properties of portland cement paste with nano-montmorilloniteJournal of Materials Science, 2007
- Surface treatments of subdenier monofilament polypropylene fibers to optimize their reinforcing efficiency in cementitious compositesJournal of Applied Polymer Science, 2004
- Order−Disorder Transitions and Evolution of Silica Structure in Self-Assembled Mesostructured Silica Films Studied through FTIR SpectroscopyThe Journal of Physical Chemistry B, 2003