In Situ Compatibilization of the Blends of Low-density Polyethylene (LDPE) and Polydimethylsiloxane (PDMS) Rubber by Ethylene Methyl Acrylate (EMA) Copolymer
Authors:
- 1 January 2007
- journal article
- research article
- Published by SAGE Publications in Journal of Thermoplastic Composite Materials
- Vol. 20 (1) , 75-92
Abstract
The blends of low-density polyethylene (LDPE) and polydimethylsiloxane (PDMS) rubber have been compatibilized with the help of ethylene methyl acrylate (EMA) copolymer. The optimum levels of EMA, based on the maximum strength properties observed, have been found to be 2, 4, 8, and 10 wt.% for LDPE-PDMS 70/30, 60/40, 40/60, and 30/70 blends, respectively. This has been further confirmed from their dynamic mechanical analysis, adhesion studies, X-ray diffraction studies, and phase morphology. Dynamic mechanical analysis exhibits improved compatibility of the blend constituents with addition of EMA. Adhesion strength (lap shear) improves with addition of EMA in the blends. With the optimum level of EMA a higher degree of crystallinity and finer phase morphology are observed.Keywords
This publication has 35 references indexed in Scilit:
- Effect of Ethylene Copolymers as Polymeric Compatibilizers for LDPE and PDMS Rubber BlendsJournal of Elastomers & Plastics, 2004
- Compatibilization by main‐chain thermotropic liquid crystalline ionomer of blends of PBT/PPJournal of Applied Polymer Science, 2002
- Study of the epoxy system BADGE (n = 0)/1,2‐DCH/CaCO3 filler by DMA and DSCJournal of Applied Polymer Science, 2002
- Graft interpenetrating polymer networks of urethane-modified bismaleimide and epoxy (I): mechanical behavior and morphologyPolymer, 2001
- A study of the effect of PP‐g‐MA and SEBS‐g‐MA on the mechanical and morphological properties of polypropylene/nylon 6 blendsPolymer Engineering & Science, 2000
- Poly(ethylene-graft-ethylene oxide) (PE-PEO) and poly(ethylene-co-acrylic acid) (PEAA) as compatibilizers in blends of LDPE and polyamide-6Journal of Applied Polymer Science, 2000
- Studies on miscibility of blends of ethylene methyl acrylate and polydimethyl siloxane rubberPolymer Engineering & Science, 1993
- In situ compatibilization of low‐density polyethylene and polydimethylsiloxane rubber blends using ethylene–methyl acrylate copolymer as a chemical compatibilizerJournal of Applied Polymer Science, 1993
- Compatibilization of polymer blends by reactive processingPolymer Engineering & Science, 1991
- Fibers from Polymer Blends1978