Role of Interdendritic Fluid Flow on the Porosity Formation in A206 Alloy Plate Castings
Authors:
- 1 January 1994
- journal article
- Published by Japan Institute of Metals in Materials Transactions, JIM
- Vol. 35 (9) , 632-639
Abstract
Porosity formation in A206 aluminum plate castings was studied experimentally and theoretically. The experimental results indirectly confirm the roles of interdendritic liquid metal flow which causes a local pressure drop within the interdendritic liquid in accordance with the Darcy’s law. A solidification feeding efficiency index, denoted as G0.4⁄Vs1.6 (G is the thermal gradient and Vs is the solidus velocity), is employed to estimate the value of local pressure drop during solidification process and to predict the formation of porosity in A206 alloy castings. That the influence of the index is more prominent at a longer local solidification time than at a shorter local solidification time is also supported by the experiment. The experimental result indicates that an increase of G0.4⁄Vs1.6 and a decrease of solidification time reduce the amount of porosity content.Keywords
This publication has 10 references indexed in Scilit:
- Mechanisms of porosity formation during solidification: A theoretical analysisMetallurgical Transactions B, 1993
- Modeling of feeding behavior of solidifying Al-7Si-0.3Mg alloy plate castingMetallurgical Transactions B, 1990
- The role of solidus velocity in the feeding behaviour of Al7si0.3Mg alloy plate castingsMaterials Science and Engineering: A, 1990
- Study of microporosity formation in nickel-base superalloysMetallurgical Transactions A, 1988
- A thermodynamic prediction for microporosity formation in aluminum-rich Al-Cu alloysMetallurgical Transactions A, 1987
- Centerline porosity in plate castingsMetallurgical Transactions B, 1985
- Mathematical modeling of porosity formation in solidificationMetallurgical Transactions B, 1985
- Interdendritic fluid flow in a lead-tin alloyMetallurgical Transactions B, 1976
- The dendrite arm spacings of aluminum-copper alloys solidified under steady-state conditionsMetallurgical Transactions A, 1975
- Specific permeability of partially solidified dendritic networks of Al-Si alloysMetallurgical Transactions, 1974