Ruchi Pathak Kaul
Ruchi Pathak Kaul has a total of 23 co-authors. Here are the top co-authors by number of shared publications:
- Ayush Malviya
All India Institute of Medical Sciences, India
2 shared publications - Subodh Kumar
Division of Trauma Surgery & Critical Care, JPN Apex Trauma Centre, All India Institute of Medical Sciences, New Delhi, India
2 shared publications - Sushma Sagar
Division of Trauma Surgery and Critical Care, Jai Prakash Narayan Apex Trauma Centre, All India Institute of Medical Sciences, New Delhi, India
2 shared publications Abhishek Kumar
Department of Surgery, Jai Prakash Narayan Apex Trauma Center, All India Institute of Medical Sciences, New Delhi, India
1 shared publication- Amit Gupta
Division of Trauma Surgery and Critical Care, JPN Apex Trauma Centre, All India Institute of Medical Sciences, New Delhi, India
1 shared publication - Anurag Singh
Department of Oral& Maxillofacial Surgery, ITS-CDSR, Muradnagar, Ghaziabad, India
1 shared publication
Latest Publications
- Open Access
- 19 September 2024
- Published by JMIR Publications Inc. in JMIRx Med
- Vol. 5 (1) , e65151
Peer Review of “Artificial Intelligence in Healthcare: 2023 Year in Review (Preprint)”
- 19 September 2024
- Published by JMIR Publications Inc. in JMIRx Med
- Vol. 5 (1) , e65151
Open AccessPeer Review of “Artificial Intelligence in Healthcare: 2023 Year in Review (Preprint)”
- Open Access
- 31 July 2024
- Published by MDPI AG in Preprints.org
An Experimental Study Conducted on Material Properties Used in a FDM Printer for Medical Models
3D Printing /Additive manufacturing holds a promising future in healthcare as it aids in visualizing things and making 3D objects which is very important in different areas of medicine. The concept of one size fits all has failed the quality of care delivered by us in healthcare which demands customised needs for patient care to create 3D printed tissues, make personalized prosthetics, implants and physical models of the human body. The materials used for printing models and other healthcare devices for medical education, patient needs, and prototyping are increasing. The application of different materials for use in healthcare is not studied. New materials are also available for the various applications in healthcare industry. This experimental study was conducted to review the nine distinct 3D printing filament materials like PETG, PA, ABS, PLA, HIPS, PMMA, Ceramic, Carbon Fiber, and (PLA + Metal Composite) with the help of a 3D printed physical model of T-12 thoracic vertebrae using all the abovementioned materials. The evaluation of materials was based on diverse mechanical properties, applications across medical fields, performance metrics, costs, accuracy, and quality. The assessment This study also focuses on comparison of mechanical properties such as tensile strength, compressive strength of the abovementioned materials with human bone. The study also reviews the 3D printing process and explores its utilization in biomedical applications. The Insights about the application of various materials holds a promising future for development of newer materials for healthcare industry.
- 31 July 2024
- Published by MDPI AG in Preprints.org
Open AccessAn Experimental Study Conducted on Material Properties Used in a FDM Printer for Medical Models
3D Printing /Additive manufacturing holds a promising future in healthcare as it aids in visualizing things and making 3D objects which is very important in different areas of medicine. The concept of one size fits all has failed the quality of care delivered by us in healthcare which demands customised needs for patient care to create 3D printed tissues, make personalized prosthetics, implants and physical models of the human body. The materials used for printing models and other healthcare devices for medical education, patient needs, and prototyping are increasing. The application of different materials for use in healthcare is not studied. New materials are also available for the various applications in healthcare industry. This experimental study was conducted to review the nine distinct 3D printing filament materials like PETG, PA, ABS, PLA, HIPS, PMMA, Ceramic, Carbon Fiber, and (PLA + Metal Composite) with the help of a 3D printed physical model of T-12 thoracic vertebrae using all the abovementioned materials. The evaluation of materials was based on diverse mechanical properties, applications across medical fields, performance metrics, costs, accuracy, and quality. The assessment This study also focuses on comparison of mechanical properties such as tensile strength, compressive strength of the abovementioned materials with human bone. The study also reviews the 3D printing process and explores its utilization in biomedical applications. The Insights about the application of various materials holds a promising future for development of newer materials for healthcare industry.
- Open Access
- 30 July 2024
- Published by MDPI AG in Preprints.org
An Experimental Study and Review to Demonstrate Mechanical and Material Characteristics of 9 Popular Filaments for 3D Printing
The dynamic landscape of 3D printing has experienced a notable surge in the development of diverse filaments tailored for a wide range of applications in medicine. This experimental study thoroughly examines the mechanical properties of nine popular 3D printer filaments, namely PLA, ABS, HIPS, PETG, PA, Carbon Fiber, Ceramic, PMMA, and Metal composite. Focusing on key aspects such as tensile strength and compressive tests, the study delves into the intricate mechanical characteristics of these 3D printer filaments. In addition to the mechanical properties, the study provides a comprehensive exploration of essential filament attributes, including melting point, bed temperature requirements, and density of nine different filament properties. Furthermore, the study addresses crucial considerations in material selection for different applications. Through insightful comparisons, the article illuminates the advantages and limitations of various available filaments within the realm of applications. This study serves as a valuable resource, offering nuanced insights for researchers, engineers, and medical professionals seeking a deeper understanding of the mechanical characteristics of 3D printer filaments and their potential applications.
- 30 July 2024
- Published by MDPI AG in Preprints.org
Open AccessAn Experimental Study and Review to Demonstrate Mechanical and Material Characteristics of 9 Popular Filaments for 3D Printing
The dynamic landscape of 3D printing has experienced a notable surge in the development of diverse filaments tailored for a wide range of applications in medicine. This experimental study thoroughly examines the mechanical properties of nine popular 3D printer filaments, namely PLA, ABS, HIPS, PETG, PA, Carbon Fiber, Ceramic, PMMA, and Metal composite. Focusing on key aspects such as tensile strength and compressive tests, the study delves into the intricate mechanical characteristics of these 3D printer filaments. In addition to the mechanical properties, the study provides a comprehensive exploration of essential filament attributes, including melting point, bed temperature requirements, and density of nine different filament properties. Furthermore, the study addresses crucial considerations in material selection for different applications. Through insightful comparisons, the article illuminates the advantages and limitations of various available filaments within the realm of applications. This study serves as a valuable resource, offering nuanced insights for researchers, engineers, and medical professionals seeking a deeper understanding of the mechanical characteristics of 3D printer filaments and their potential applications.
- Open Access
- 1 June 2014
- Published by MDPI AG in Craniomaxillofacial Trauma & Reconstruction
- Vol. 7 (2) , 126-130
Burden of Maxillofacial Trauma at Level 1 Trauma Center
There is an upward trend in facial injuries following changes in population pattern, increasing industrialization and urbanization, hence maxillofacial trauma is becoming a burden and a leading medical problem in emergency rooms worldwide. This study was performed to evaluate the pattern of maxillofacial fractures, associated injuries, and treatment used at Jai Prakash Narayan Apex Trauma Center (JPNATC), All India Institute of Medical Sciences (AIIMS), New Delhi, India, between January 2007 and June 2010. The study provides basis for establishment of trauma as major etiology of maxillofacial injuries and planning for preventive strategies. A retrospective study of patients seen and treated at JPNATC, AIIMS, New Delhi, between January 2007 and June 2010 was performed. Data extracted from patient records included etiology, age, sex, types and sites of fractures, treatment modality, and concomitant injuries. There were 795 fractures of the maxillofacial skeleton and 86 concomitant injuries from 542 patients. Road traffic accident (RTA) (56.8%) was the most common etiologic factor, followed by falls (22.3%) and fights (18.5%). The age range was from 3 to 75 years (mean, 34.7 years) with a peak incidence in the third decade with a male-to-female ratio of 3.7:1. The most common location of maxillofacial fractures was the mandible 615 (77%) and middle third 180 (23%). With regard to mandibular fractures, the body (29.6%) was the most common site, followed by the angle (24.4%), ramus (19.5%), dentoalveolar (14.6%), symphysis (11.0%), condyle (0.8%) while in the middle third, the nasal bone (36.7%) was the most common, followed by zygomatic bone (27.8), Lefort II (14.4), Lefort I (7.8%), dentoalveolar (10.0%), and Lefort III (3.3%). Majority of the patients were treated by open reduction and internal fixation (70.6). Concomitant injuries were 84 (10.8%) with orthopedic injuries accounting for the majority (63.9%). Head injury was associated in 16.3% of cases. RTA was the major etiologic factor of maxillofacial injuries in our setting and the young adult males were the main victims. Henceforth, establishment of regionalized, efficient, and focused trauma centers in various parts of the country particularly for acute trauma should be emphasized. Also, the laws regarding the precautions such as seat belts, speed limits, and traffic rules must be observed strictly to reduce the incidence of RTA.
- 1 June 2014
- Published by MDPI AG in Craniomaxillofacial Trauma & Reconstruction
- Vol. 7 (2) , 126-130
Open AccessBurden of Maxillofacial Trauma at Level 1 Trauma Center
There is an upward trend in facial injuries following changes in population pattern, increasing industrialization and urbanization, hence maxillofacial trauma is becoming a burden and a leading medical problem in emergency rooms worldwide. This study was performed to evaluate the pattern of maxillofacial fractures, associated injuries, and treatment used at Jai Prakash Narayan Apex Trauma Center (JPNATC), All India Institute of Medical Sciences (AIIMS), New Delhi, India, between January 2007 and June 2010. The study provides basis for establishment of trauma as major etiology of maxillofacial injuries and planning for preventive strategies. A retrospective study of patients seen and treated at JPNATC, AIIMS, New Delhi, between January 2007 and June 2010 was performed. Data extracted from patient records included etiology, age, sex, types and sites of fractures, treatment modality, and concomitant injuries. There were 795 fractures of the maxillofacial skeleton and 86 concomitant injuries from 542 patients. Road traffic accident (RTA) (56.8%) was the most common etiologic factor, followed by falls (22.3%) and fights (18.5%). The age range was from 3 to 75 years (mean, 34.7 years) with a peak incidence in the third decade with a male-to-female ratio of 3.7:1. The most common location of maxillofacial fractures was the mandible 615 (77%) and middle third 180 (23%). With regard to mandibular fractures, the body (29.6%) was the most common site, followed by the angle (24.4%), ramus (19.5%), dentoalveolar (14.6%), symphysis (11.0%), condyle (0.8%) while in the middle third, the nasal bone (36.7%) was the most common, followed by zygomatic bone (27.8), Lefort II (14.4), Lefort I (7.8%), dentoalveolar (10.0%), and Lefort III (3.3%). Majority of the patients were treated by open reduction and internal fixation (70.6). Concomitant injuries were 84 (10.8%) with orthopedic injuries accounting for the majority (63.9%). Head injury was associated in 16.3% of cases. RTA was the major etiologic factor of maxillofacial injuries in our setting and the young adult males were the main victims. Henceforth, establishment of regionalized, efficient, and focused trauma centers in various parts of the country particularly for acute trauma should be emphasized. Also, the laws regarding the precautions such as seat belts, speed limits, and traffic rules must be observed strictly to reduce the incidence of RTA.
- 27 December 2011
- Published by Springer Nature in Journal of Maxillofacial and Oral Surgery
- Vol. 11 (2) , 200-205
Autologous Platelet Rich Plasma After Third Molar Surgery: A Comparative Study
Purpose This study is an attempt to evaluate the use of autologous platelet rich plasma (PRP) to promote wound healing and osseous regeneration in human third molar extraction sockets. Materials and method PRP was prepared after two centrifugation and the gelling agent used was freshly prepared 10% calcium chloride.PRP gel was placed in one of the extracted sockets of bilateral impacted mandibular third molars. IOPA Xrays were used to evaluate the wound dehiscence, probing depth, bone density & alveolar bone level after 1st, 2nd and 7th day and 3rd & 6th month respectively. Results On evaluation, it was found that PRP grafted sockets showed dehiscence in 8% cases. The decrease in alveolar bone level was highly significant in PRP grafted sockets in 3rd and 6th month post operatively. There was significant difference between pre-operative density of adjacent bone and bone formed in extraction sockets at 3rd and 6th month in PRP grafted sockets. There was significant reduction in probing depth from initial period to 3 and 6 months in both the groups, but PRP grafted sockets showed greater decrease in probing depth. Conclusion PRP is an inexpensive and widely available modality to minimize postoperative complication and enhance both hard and soft tissue healing potentials. This autologous product eliminates concern about immunogenic reaction and disease transmission. Its beneficial outcomes in dental clinic, including decrease in bleeding and rapid wound healing hold promise for further procedures.PRP is thus a new application in tissue engineering and developing area for clinician and researchers.
- 27 December 2011
- Published by Springer Nature in Journal of Maxillofacial and Oral Surgery
- Vol. 11 (2) , 200-205
Autologous Platelet Rich Plasma After Third Molar Surgery: A Comparative Study
Purpose This study is an attempt to evaluate the use of autologous platelet rich plasma (PRP) to promote wound healing and osseous regeneration in human third molar extraction sockets. Materials and method PRP was prepared after two centrifugation and the gelling agent used was freshly prepared 10% calcium chloride.PRP gel was placed in one of the extracted sockets of bilateral impacted mandibular third molars. IOPA Xrays were used to evaluate the wound dehiscence, probing depth, bone density & alveolar bone level after 1st, 2nd and 7th day and 3rd & 6th month respectively. Results On evaluation, it was found that PRP grafted sockets showed dehiscence in 8% cases. The decrease in alveolar bone level was highly significant in PRP grafted sockets in 3rd and 6th month post operatively. There was significant difference between pre-operative density of adjacent bone and bone formed in extraction sockets at 3rd and 6th month in PRP grafted sockets. There was significant reduction in probing depth from initial period to 3 and 6 months in both the groups, but PRP grafted sockets showed greater decrease in probing depth. Conclusion PRP is an inexpensive and widely available modality to minimize postoperative complication and enhance both hard and soft tissue healing potentials. This autologous product eliminates concern about immunogenic reaction and disease transmission. Its beneficial outcomes in dental clinic, including decrease in bleeding and rapid wound healing hold promise for further procedures.PRP is thus a new application in tissue engineering and developing area for clinician and researchers.