PPPeter Pilewskie

Peter Pilewskie

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Peter Pilewskie has a total of 152 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Retrieval of Vertical Cloud Droplet Profiles and Above-Cloud Integrated Water Vapor from Hyperspectral Measurements: Reducing Liquid Water Path Retrieval Bias with Application to EMIT

    by Andrew John Buggee, Peter Pilewskie

    Accurate liquid water path estimates derived from backscattered solar radiation require knowledge of the vertical structure of cloud droplet effective radius, yet standard bispectral retrievals assume a vertically homogeneous cloud and overestimate liquid water path by up to 45% compared to in situ measurements. We developed a Gauss–Newton optimal estimation retrieval that simultaneously estimates vertical profiles of cloud droplet effective radius, cloud optical thickness, and above-cloud integrated water vapor from hyperspectral solar backscatter measurements in the visible and shortwave infrared. The retrieval solves for effective radius at cloud top and base, cloud optical thickness, and above-cloud integrated water vapor in logarithmic space, using an a priori covariance matrix with off-diagonal elements derived from VOCALS-REx in situ measurements, and incorporating forward model uncertainty with a forward model Jacobian. Tested on 69 simulated HySICS reflectance spectra constructed from in situ cloud microphysics, the hyperspectral retrieval reduces the average liquid water path error to 26.9%, compared to 45.2% for the standard bispectral method. Applied to 3695 EMIT hyperspectral measurements over the southeast Pacific, MODIS-retrieved liquid water path exceeds the hyperspectral estimate by 19% on average. These results demonstrate that simultaneous retrieval of the integrated water vapor above-cloud is necessary for accurate droplet profile retrievals, and that the upcoming CLARREO Pathfinder instrument, with its 0.3% radiometric uncertainty, should enable routine vertical profiling of cloud droplet size.

  • Open Access

    Analysis of CCCma Radiative Transfer Calculations for Single‐Layer Overcast Ice Clouds

    by Jordann Brendecke, Xiquan Dong, Baike Xi, Xiang Zhong, Howard W. Barker, Jiangnan Li, Peter Pilewskie

    Understanding interactions between incoming shortwave (SW) solar radiation and clouds is essential for quantifying and modeling Earth's Radiation Budget (ERB). Ice clouds are particularly problematic due to their wide variability in crystal habits, sizes, and shapes. In this study, data from NASA's Cloud and Earth Radiative Energy System (CERES) are used to identify single‐layer overcast ice clouds and calculate surface and top‐of‐atmosphere (TOA) SW fluxes using the Canadian Centre for Climate Modeling and Analysis (CCCma) Radiative Transfer Model (RTM). A total of 361 SW flux observations from 11 surface sites spanning different climatic regions, together with CERES SYN1deg satellite observations at the TOA, are used to evaluate the CCCma RTM's performance. The CCCma RTM exhibits mean bias errors (MBEs) of +3.7 W m −2 at the surface and +4.1 W m −2 at the TOA, with root mean square errors (RMSEs) of 72.7 and 33.2 W m −2 , respectively. Correspondingly, the CERES SYN1deg Fu‐Liou RTM shows MBEs of −12.1 and +18.5 W m −2 and RMSEs of 75.0 and 34.5 W m −2 for surface and TOA, respectively. MBE differences between the two RTMs are due to differing treatments of model physics, while their larger RMSEs at the surface result from both imprecise inputs and spatial variabilities of both inputs and surface observed flux.

  • Open Access

    Principal Component-Based Spectral Standardization for Optical Spectrometers

    by Qiguang Yang, Xu Liu, Wan Wu, Rajendra Bhatt, Yolanda Shea, Xiaozhen Xiong, Ming Zhao, Paul Smith, Greg Kopp, Peter Pilewskie

    A Principal Component-Based Spectral Standardization (PCSS) method was developed to standardize hyperspectral radiance spectra onto a fixed wavelength grid. This enables the direct comparison of radiance or reflectance spectra across different spatial pixels of an imaging spectrometer or between different instruments. The method was validated using simulated Climate Absolute Radiance and Refractivity Observatory (CLARREO) Pathfinder (CPF) spectra. The PCSS approach demonstrated high accuracy: the average root-mean-square uncertainty across all CPF channels remained below 0.07%, with maximum individual-channel uncertainties under 1%. Compared to methods based on spectral interpolation, PCSS produced significantly lower biases with tighter error distributions, particularly in spectrally rich regions. Measured Hyper Spectral Imager for Climate Science (HySICS) balloon data provided further validation. PCSS successfully estimated wavelength shifts that closely matched measured data, even when utilizing approximated Jacobians, demonstrating the method’s robustness. Because it relies on a pre-computed lookup table for model parameters, PCSS bypasses the need for intensive radiative transfer calculations, making it highly computationally efficient. Beyond CPF, this method can easily be adapted for other hyperspectral sensors by substituting their respective wavelength grids and instrument line shape functions, offering a powerful tool to improve cross-calibration between different satellite sensors.

  • Open Access

    Hyperspectral Retrieval of Vertical Cloud Droplet Profiles and Above-Cloud Integrated Water Vapor: Reducing Liquid Water Path Retrieval Bias with Application to EMIT

    by Andrew Buggee, Peter Pilewskie

    Accurate liquid water path estimates derived from backscattered solar radiation require knowledge of the vertical structure of cloud droplet effective radius, yet standard bispectral retrievals assume a vertically homogeneous cloud and overestimate liquid water path by up to 45% compared with in situ measurements. We developed a Gauss-Newton optimal estimation retrieval that simultaneously estimates vertical profiles of cloud droplet effective radius and above-cloud integrated water vapor from hyper-spectral solar backscatter measurements in the visible and shortwave infrared. The retrieval solves for effective radius at cloud top and base, cloud optical thickness, and above-cloud integrated water vapor in logarithmic space, using an a priori covariance matrix with off-diagonal elements derived from VOCALS-REx in-situ measurements. Tested on 69 simulated HySICS reflectance spectra constructed from in situ cloud microphysics, the hyperspectral retrieval reduces the average liquid water path error to 17.7%, compared to 45.2% for the standard bispectral method. Applied to 603 EMIT hyperspectral measurements over the southeast Pacific, MODIS-retrieved liquid water path exceeds the hyperspectral estimate by 25.6% on average. These results demonstrate that simultaneous retrieval of above-cloud water vapor is necessary for accurate droplet profile retrievals, and that the upcoming CLARREO Pathfinder instrument, with its 0.3% radiometric uncertainty, should enable routine vertical profiling of cloud droplet size.

  • Open Access

    Optimizing Surface Type Definitions in Radiance-to-Irradiance Conversions for Future Earth Radiation Budget Satellite Measurements

    by Mathew van Den Heever, Jake J. Gristey, Peter Pilewskie

    Angular Distribution Models (ADMs) are essential for converting observed radiances from satellite sensors to the energy-budget–relevant quantity of irradiance. In preparation for the NASA Libera mission, this study presents a data-driven framework to identify optimal groupings of International Geosphere–Biosphere Programme (IGBP) surface types for Libera’s split-shortwave ADMs, in an effort to minimize the uncertainty associated with radiance-to-irradiance conversions while maintaining operational feasibility. Using data from the Clouds and the Earth’s Radiant Energy System (CERES) Flight Model 5 (FM-5), K-means clustering is applied within angular bins to capture viewing-geometry-dependent radiometric behavior. These angular clustering solutions are then assessed via hierarchical consensus clustering to derive consistent surface groups. The analysis suggests seven surface groups (K = 7) optimize the surface clustering space. The resulting classifications are broadly consistent with historical CERES–TRMM ADM surface definitions, preserving radiometrically distinct surfaces such as water bodies and snowy surfaces while highlighting opportunities to consolidate vegetative IGBP surface classes. This study provides an objective and physically grounded basis for defining Libera ADM surface groups, ensuring a robust balance between model accuracy and operational simplicity.


  • Open Access

    Applying Heat Transport Modelling to Reduce Measurement Uncertainty of the LASP Reference Standard NACR8

    by Malcolm White, Karl Heuerman, Julian Gieseler, Edward Thiemann, Ping-Shine Shaw, Nathan Tomlin, Joel Rutkowski, Cameron Straatsma, Peter Pilewskie, Erik Richard, et al.

    Heat transport modelling of a planar absolute detector with vertically aligned carbon nanotube absorbers has been applied to the newly developed ambient-temperature electrical substitution radiometer (ESR), NACR8. Integrated into the Laboratory for Atmospheric and Space Physics (LASP) Total-solar-irradiance Radiometer Facility (TRF) NACR8 operates as an absolute optical power reference standard supporting validation of satellite based solar irradiance measurements, including those from the TSIS 2 TIM instrument. The modelling enables estimation and correction for electro-optical non-equivalence and its associated uncertainty, providing a generalised method applicable to planar thermal detectors. This approach represents an advancement in the understanding and correction of radiometric non-equivalence in optical radiation metrology. Traceability and performance of NACR8, incorporating a correction factor of 0.999562 with a standard uncertainty (u) = 0.000183 were confirmed through comparison with the National Institute of Standards and Technology (NIST) Primary Optical Watt Radiometer (POWR) at 532.12 nm using a silicon photodiode light trapping transfer standard. Further comparison with NACR5, an established LASP optical power standard, showed agreement within stated uncertainties demonstrating the effectiveness of the heat transport modelling approach for addressing electro-optical non-equivalence in planar thermal detectors.

  • Open Access

    Analysis of the Long‐Term Stability of TSI Instruments Using Allan Deviation and the Generation of a New TSI Composite

    by O. Coddington, D. Harber, P. Pilewskie, E. Richard, T. Patton

    The dominant external forcing to Earth's climate system is solar radiation, referred to as the solar spectral irradiance (SSI) and the total solar irradiance (TSI), which is the integral of SSI over all wavelengths. Accurate measurements of TSI and SSI are made from space because solar radiation is absorbed within Earth's atmosphere and that absorption would otherwise need to be corrected for, with added uncertainty, in ground or airborne solar irradiance observations. Composite solar irradiance records, developed from multiple instruments, can represent solar forcing over timescales longer than the lifetime of any individual instrument. We develop a new TSI composite record from pairs of overlapping individual measurement records with the highest relative stability over the longest timescales as determined from Allan Deviation analysis. Allan Deviation is a time‐domain measurement standard analysis technique that was originally established by the metrology community to quantify the stability of atomic clocks. Version 0 of the Time Variance TSI (TV TSI) Composite begins in early 2003 and includes all Total Irradiance Monitor (TIM) instrument records beginning with the NASA Solar Radiation and Climate Experiment (SORCE) mission and continuing through today with the Total and Spectral Solar Irradiance Sensor (TSIS‐1) mission. In future work, we plan to use Allan Deviation analysis to guide the incorporation of additional TSI measurement records and their time‐dependent expression of uncertainties in order to develop a new version of the TV TSI composite that spans an even longer period of time for climate studies.


  • Detector-Based Prelaunch Absolute Radiometric Calibration for CLARREO Pathfinder HySICS Instrument

    by Zhipeng Wang, Kurtis Thome, Paul Smith, Yana Williams, Rachel Clemens, Kaitlin Liles, Jonathan M. Mihaly, Peter Pilewskie, Yolanda Shea, Brian N. Wenny

    The HyperSpectral Imager for Climate Science (HySICS) is the sole instrument of the CLARREO Pathfinder (CPF) mission, which was previously planned for launch to the International Space Station (ISS) in 2026. It is an Offner-Chrisp imaging spectrometer designed to achieve an exceptional radiometric uncertainty of 0.3%-0.6% (k=1) for Earth reflectance measurements across a spectral range of 350-2260 nm. This represents a significant improvement over existing spaceborne spectrometers, which typically achieve uncertainties greater than 2%. To validate this performance, an Independent Calibration (IndCal) strategy has been developed, relying on a pre-launch, detector-based absolute radiometric calibration (RadCal) approach using the Goddard Laser for Absolute Measurement of Radiance (GLAMR), a tunable laser source developed at NASA's Goddard Space Flight Center. The RadCal test, conducted in September 2023, systematically characterized the radiometric and spectral performances of HySICS through full-field, full-aperture, and full-spectrum evaluations. The test measured the absolute spectral responses (ASRs), band-integrated responsivities and other radiometric parameters of HySICS' detector at the pixel level, focusing on minimizing uncertainties at every stage of the measurement process. This paper details the methodology, configuration and key results of the test, which notably marks the first application of detector-based absolute RadCal to an operational imaging spectrometer. The demonstrated performance is expected to establish a new benchmark for high-accuracy absolute RadCal of remote sensing instruments in Earth observation.


  • Analysis of CCCma Radiative Transfer Calculations for Low‐Level Overcast Liquid Clouds Over ARM SGP and ENA Sites

    by Jordann Brendecke, Xiquan Dong, Baike Xi, Xiang Zhong, Howard W. Barker, Jiangnan Li, Peter Pilewskie

    This study uses the Canadian Centre for Climate Modeling and Analysis (CCCma) radiative transfer model to estimate shortwave flux for low‐level overcast liquid clouds. Calculations are evaluated against measurements at the Atmospheric Radiation Measurement Southern Great Plains (SGP, land) and Eastern North Atlantic (ENA, ocean) sites, as well as top of atmosphere (TOA) fluxes inferred from Clouds and Earth's Radiant Energy System (CERES) from 2014 to 2023. Mean observed surface (TOA) SW fluxes for the selected cases are 235.7 W m −2 (473.8 W m −2 ) at SGP and 348.7 W m −2 (356.4 W m −2 ) at ENA. Cloud microphysical properties retrieved from CERES MODIS are input into the CCCma using three assumed profiles: (a) cloud droplet effective radius ( r e ) and liquid water content (LWC) constant with height, (b) LWC and r e increasing linearly with height, and (c) LWC and r e increasing linearly from cloud base to ¾ height and then decreasing linearly up to cloud top. Overall, Method 3 produces the least error variance at both sites. At SGP, mean bias and root mean square error (RMSE) are −5.0 and 44.6 W m −2 at the surface and −4.6 and 25.4 W m −2 at TOA. At ENA, errors are +0.2 and 121.3 W m −2 at the surface and −8.0 and 26.1 W m −2 at TOA. Further screening cases with good agreement between satellite‐ and surface‐based cloud properties, RMSEs for surface fluxes decrease to 24.3 and 25.8 W m −2 at SGP and ENA. Comparisons with CERES Fu‐Liou calculations showed overall better performance by the CCCma, especially at ENA.


  • Open Access

    Optimizing the Sampling Strategy for Future Libera Radiance to Irradiance Conversions

    by Mathew van Den Heever, Jake J. Gristey, Peter Pilewskie

    The Earth Radiation Budget (ERB), a measure of the difference between incoming solar irradiance and outgoing reflected and emitted radiant energy, is a fundamental property of Earth’s climate system. The Libera satellite mission will measure the ERB’s outgoing components to continue the long-term climate data record established by NASA’s Clouds and the Earth’s Radiant Energy System (CERES) mission. In addition to ensuring data continuity, Libera will introduce a novel split-shortwave spectral channel to quantify the partitioning of the outgoing reflected solar component into visible and near-infrared sub-components. However, converting these split-shortwave radiances into the ERB-relevant irradiances requires the development of split-shortwave Angular Distribution Models (ADMs), which demand extensive angular sampling. Here, we show how Rotating Azimuthal Plane Scan (RAPS) parameters—specifically operational cadence and azimuthal scan rate—affect the observational coverage of a defined scene and angular space. Our results show that for a fixed number of azimuthal rotations, a relatively slow azimuthal scan rate of 0.5° per second, combined with more time spent in the RAPS observational mode, provides a more comprehensive sampling of the desired scene and angular space. We also show that operating the Libera instrument in RAPS mode at a cadence between every fifth day and every other day for the first year of space-based operations will provide sufficient scene and angular sampling for the observations to achieve radiance convergence for the scenes that comprise more than half of the expected Libera observations. Obtaining radiance convergence is necessary for accurate ADMs.