Naoko Ellis
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Naoko Ellis has a total of 12 co-authors. Here are the top co-authors by number of shared publications:
Stephen J. Reaume
Chemical and Biological Engineering, University of British Columbia, 2360 East Mall, Vancouver, British Columbia V6T1Z3, Canada
2 shared publications- Alex H. West
University of British Columbia
1 shared publication - Andres Mahecha-Botero
University of British Columbia
1 shared publication C. Jim Lim
Chemical and Biological Engineering, University of British Columbia, 2360 East Mall, Vancouver, BC, Canada V6T 1Z3
1 shared publication- Dusko Posarac
University of British Columbia
1 shared publication John R. Grace
1 shared publication
Latest Publications
- 1 March 2018
- Published by Walter de Gruyter GmbH
Simulation, Case Studies and Optimization of a Biodiesel Process with a Solid Acid CatalystThe authors acknowledge the financial support of the Natural Sciences and Engineering Research Council of Canada.
A commercial process simulator was used to develop a detailed simulation of a biodiesel production process, and carry out case studies and optimization. The simulated process produced biodiesel from a feedstock containing 5 wt.% free fatty acids in a fixed-bed reactor with sulfated-zirconia as an acidic catalyst. Sized unit operation blocks, material and energy flows were used to conduct an economic assessment of the process. Total capital investment, total manufacturing cost, after tax rate-of-return and production cost ($/kg) were all determined for the process. The process was then optimized by maximizing the after tax rateof-return (ATROR). Based on our previous work, the most economical process for transesterification of waste vegetable oil at the scale of 8000 metric tones/yr of biodiesel production among the four processes examined was based on a solid acid catalyst reaction. Our results showed that the process is economically feasible, even without government subsidy, while at the same time, the produced biodiesel met the required ASTM standard for purity.
- 1 March 2018
- Published by Walter de Gruyter GmbH
Simulation, Case Studies and Optimization of a Biodiesel Process with a Solid Acid CatalystThe authors acknowledge the financial support of the Natural Sciences and Engineering Research Council of Canada.
A commercial process simulator was used to develop a detailed simulation of a biodiesel production process, and carry out case studies and optimization. The simulated process produced biodiesel from a feedstock containing 5 wt.% free fatty acids in a fixed-bed reactor with sulfated-zirconia as an acidic catalyst. Sized unit operation blocks, material and energy flows were used to conduct an economic assessment of the process. Total capital investment, total manufacturing cost, after tax rate-of-return and production cost ($/kg) were all determined for the process. The process was then optimized by maximizing the after tax rateof-return (ATROR). Based on our previous work, the most economical process for transesterification of waste vegetable oil at the scale of 8000 metric tones/yr of biodiesel production among the four processes examined was based on a solid acid catalyst reaction. Our results showed that the process is economically feasible, even without government subsidy, while at the same time, the produced biodiesel met the required ASTM standard for purity.
- Open Access
Use of Isomerization and Hydroisomerization Reactions to Improve the Cold Flow Properties of Vegetable Oil Based Biodiesel
Biodiesel is a promising alternative to petroleum diesel with the potential to reduce overall net CO2 emissions. However, the high cloud point of biodiesel must be reduced when used in cold climates. We report on the use of isomerization and hydroisomerization reactions to reduce the cloud point of eight different fats and oils. Isomerization was carried out at 260 °C and 1.5 MPa H2 pressure utilizing beta zeolite catalyst, while hydroisomerization was carried out at 300 °C and 4.0 MPa H2 pressure utilizing 0.5 wt % Pt-doped beta zeolite catalyst. Reaction products were tested for cloud point and flow properties, in addition to catalyst reusability and energy requirements. Results showed that high unsaturated fatty acid biodiesels increased in cloud point, due to the hydrogenation side reaction. In contrast, low unsaturated fatty acid biodiesels yielded cloud point reductions and overall improvement in the flow properties. A maximum cloud point reduction of 12.9 °C was observed with coconut oil as the starting material. Results of the study have shown that branching can reduce the cloud point of low unsaturated fatty acid content biodiesel.
Open AccessUse of Isomerization and Hydroisomerization Reactions to Improve the Cold Flow Properties of Vegetable Oil Based Biodiesel
Biodiesel is a promising alternative to petroleum diesel with the potential to reduce overall net CO2 emissions. However, the high cloud point of biodiesel must be reduced when used in cold climates. We report on the use of isomerization and hydroisomerization reactions to reduce the cloud point of eight different fats and oils. Isomerization was carried out at 260 °C and 1.5 MPa H2 pressure utilizing beta zeolite catalyst, while hydroisomerization was carried out at 300 °C and 4.0 MPa H2 pressure utilizing 0.5 wt % Pt-doped beta zeolite catalyst. Reaction products were tested for cloud point and flow properties, in addition to catalyst reusability and energy requirements. Results showed that high unsaturated fatty acid biodiesels increased in cloud point, due to the hydrogenation side reaction. In contrast, low unsaturated fatty acid biodiesels yielded cloud point reductions and overall improvement in the flow properties. A maximum cloud point reduction of 12.9 °C was observed with coconut oil as the starting material. Results of the study have shown that branching can reduce the cloud point of low unsaturated fatty acid content biodiesel.
- 2 July 2012
- Published by American Chemical Society (ACS) in Energy & Fuels
- Vol. 26 (7) , 4514-4520
Synergistic Effects of Skeletal Isomerization on Oleic and Palmitic Acid Mixtures for the Reduction in Cloud Point of Their Methyl Esters
- 2 July 2012
- Published by American Chemical Society (ACS) in Energy & Fuels
- Vol. 26 (7) , 4514-4520
Synergistic Effects of Skeletal Isomerization on Oleic and Palmitic Acid Mixtures for the Reduction in Cloud Point of Their Methyl Esters
- 8 March 2011
- Published by American Chemical Society (ACS) in Industrial & Engineering Chemistry Research
- Vol. 50 (8) , 4697-4706
Effect of Change in Fluidizing Gas on Riser Hydrodynamics and Evaluation of Scaling Laws
- 8 March 2011
- Published by American Chemical Society (ACS) in Industrial & Engineering Chemistry Research
- Vol. 50 (8) , 4697-4706
Effect of Change in Fluidizing Gas on Riser Hydrodynamics and Evaluation of Scaling Laws
- 1 December 2010
- Published by Wiley in Journal of the American Oil Chemists' Society
- Vol. 88 (5) , 661-671
Optimizing Reaction Conditions for the Isomerization of Fatty Acids and Fatty Acid Methyl Esters to Their Branch Chain Products
In order to improve the oxidative stability and cold flow properties of oleic acid or methyl oleate, branch chain isomerization was conducted using a beta zeolite catalyst. Reaction conditions of temperature (200–300 °C), pressure (0.1–3.0 MPa), and co‐catalyst (0–2 wt%) were optimized based on branch chain conversion and the cloud point of the ester following the isomerization reaction of oleic acid or methyl oleate. Fourier transform infrared spectroscopy (FTIR) and Gas Chromatograph equipped with Mass Spectrometry (GC/MS) analyses were used to analyze and quantify the isomerization product samples, while the cloud point of each sample was tested. The lowest and therefore, best cloud point measured was −15.2 °C at conditions of 200 °C, 3 MPa, and 2% co‐catalyst using methyl oleate as a starting material. The highest branch chain conversion achieved was 50% under conditions of 300 °C, 1.5 MPa and 0% co‐catalyst using oleic acid as a starting material. The use of oleic acid and methyl oleate is based on whether it is optimal to carry out the skeletal isomerization before or after the esterification reaction. Performing the isomerization reaction on the ester was preferred over the fatty acid based on the trans isomerization and cloud point results. Reducing the unbranched trans isomers was desirable in obtaining a low cloud point.
- 1 December 2010
- Published by Wiley in Journal of the American Oil Chemists' Society
- Vol. 88 (5) , 661-671
Optimizing Reaction Conditions for the Isomerization of Fatty Acids and Fatty Acid Methyl Esters to Their Branch Chain Products
In order to improve the oxidative stability and cold flow properties of oleic acid or methyl oleate, branch chain isomerization was conducted using a beta zeolite catalyst. Reaction conditions of temperature (200–300 °C), pressure (0.1–3.0 MPa), and co‐catalyst (0–2 wt%) were optimized based on branch chain conversion and the cloud point of the ester following the isomerization reaction of oleic acid or methyl oleate. Fourier transform infrared spectroscopy (FTIR) and Gas Chromatograph equipped with Mass Spectrometry (GC/MS) analyses were used to analyze and quantify the isomerization product samples, while the cloud point of each sample was tested. The lowest and therefore, best cloud point measured was −15.2 °C at conditions of 200 °C, 3 MPa, and 2% co‐catalyst using methyl oleate as a starting material. The highest branch chain conversion achieved was 50% under conditions of 300 °C, 1.5 MPa and 0% co‐catalyst using oleic acid as a starting material. The use of oleic acid and methyl oleate is based on whether it is optimal to carry out the skeletal isomerization before or after the esterification reaction. Performing the isomerization reaction on the ester was preferred over the fatty acid based on the trans isomerization and cloud point results. Reducing the unbranched trans isomers was desirable in obtaining a low cloud point.
- 10 March 2010
- Published by American Chemical Society (ACS) in Energy & Fuels
- Vol. 24 (4) , 2699-2706
Upgrading Bio-oil through Emulsification with Biodiesel: Thermal Stability
- 10 March 2010
- Published by American Chemical Society (ACS) in Energy & Fuels
- Vol. 24 (4) , 2699-2706
Upgrading Bio-oil through Emulsification with Biodiesel: Thermal Stability