Mitsuji Matsumoto
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Mitsuji Matsumoto has a total of 28 co-authors. Here are the top co-authors by number of shared publications:
- Kazuhiko Wakamori
Waseda Univ. (Japan)
6 shared publications - Jiehui Chen
Global COE Program International Research and Education Center for Ambient SoC, Waseda University, Tokyo, 169-8555, Japan
4 shared publications - Kamugisha Kazaura
Waseda Univ. (Japan)
4 shared publications Katsutoshi Tsukamoto
Osaka Univ. (Japan)
3 shared publicationsKoichi Takahashi
Osaka Univ. (Japan)
3 shared publications- Mariam B. Salim
Graduate School of Global Information and Telecommunication Studies, Waseda University, Tokyo, 169-0051, Japan
3 shared publications
Latest Publications
- 16 November 2012
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 30 (23) , 3727-3735
Transmission Analysis of OFDM-Based Services Over Line-of-Sight Indoor Infrared Laser Wireless Links
Radio-on-free space optical (RoFSO) communication systems are gaining popularity because of their ability to transmit simultaneously multiple radio frequency signals comprised of various wireless services over FSO links using wavelength division multiplexing technology. We propose a new approach of use of the RoFSO technology for high-speed indoor communication systems and introduce an analytical model for the transmission of orthogonal frequency-division multiplexing-based signals over a line-of-sight link with diverged Gaussian beam. We have analyzed the laser safety restrictions for the proposed system and derived a closed-form bit-error probability, taking into account the ambient noise and laser diode nonlinear distortion. Simulation results are shown and the system performance is discussed.
- 16 November 2012
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 30 (23) , 3727-3735
Transmission Analysis of OFDM-Based Services Over Line-of-Sight Indoor Infrared Laser Wireless Links
Radio-on-free space optical (RoFSO) communication systems are gaining popularity because of their ability to transmit simultaneously multiple radio frequency signals comprised of various wireless services over FSO links using wavelength division multiplexing technology. We propose a new approach of use of the RoFSO technology for high-speed indoor communication systems and introduce an analytical model for the transmission of orthogonal frequency-division multiplexing-based signals over a line-of-sight link with diverged Gaussian beam. We have analyzed the laser safety restrictions for the proposed system and derived a closed-form bit-error probability, taking into account the ambient noise and laser diode nonlinear distortion. Simulation results are shown and the system performance is discussed.
- Open Access
- 27 August 2012
- Published by MDPI AG in Journal of Sensor and Actuator Networks
- Vol. 1 (2) , 111-122
An Efficient Medium Access Control Protocol with Parallel Transmission for Wireless Sensor Networks
In this paper, we present a novel low power medium access control protocol for wireless sensor networks (WSNs). The proposed protocol, EP-MAC (Efficient MAC with Parallel Transmission) achieves high energy efficiency and high packet delivery ratio under different traffic load. EP-MAC protocol is basically based on the Time Division Multiple Access (TDMA) approach. The power of Carrier Sense Multiple Access (CSMA) is used in order to offset the fundamental problems that the stand-alone TDMA method suffers from, i.e., problems such as lack of scalability, adaptability to varying situations, etc. The novel idea behind the EP-MAC is that it uses the parallel transmission concept with the TDMA link scheduling. EP-MAC uses the methods for the transmission power adjustment, i.e., uses the minimum level power necessary to reach the intended neighbor within a specified bit error rate [BER] target. This reduces energy consumption, as well as further enhances the scope of parallel transmission of the protocol. The simulation studies support the theoretical results, and validate the efficiency of our proposed EP-MAC protocol.
- 27 August 2012
- Published by MDPI AG in Journal of Sensor and Actuator Networks
- Vol. 1 (2) , 111-122
Open AccessAn Efficient Medium Access Control Protocol with Parallel Transmission for Wireless Sensor Networks
In this paper, we present a novel low power medium access control protocol for wireless sensor networks (WSNs). The proposed protocol, EP-MAC (Efficient MAC with Parallel Transmission) achieves high energy efficiency and high packet delivery ratio under different traffic load. EP-MAC protocol is basically based on the Time Division Multiple Access (TDMA) approach. The power of Carrier Sense Multiple Access (CSMA) is used in order to offset the fundamental problems that the stand-alone TDMA method suffers from, i.e., problems such as lack of scalability, adaptability to varying situations, etc. The novel idea behind the EP-MAC is that it uses the parallel transmission concept with the TDMA link scheduling. EP-MAC uses the methods for the transmission power adjustment, i.e., uses the minimum level power necessary to reach the intended neighbor within a specified bit error rate [BER] target. This reduces energy consumption, as well as further enhances the scope of parallel transmission of the protocol. The simulation studies support the theoretical results, and validate the efficiency of our proposed EP-MAC protocol.
- 29 April 2011
- Published by Optica Publishing Group in Journal of Optical Communications and Networking
- Vol. 3 (5) , 475-486
Performance Analysis of CDMA-Based Wireless Services Transmission Over a Turbulent RF-on-FSO Channel
This paper proposes a theoretical and experimental performance study to characterize the transmission of code-division-multiple-access-based wireless signals over a radio frequency on free-space optical (RF-FSO) system using an aperture averaging (AA) technique. First, we propose an analytical model including the carrier-to-noise-plus-interference ratio (CNIR) and outage probability expressions taking into consideration the use of the AA technique, the laser diode nonlinear distortion, and the multiple-access interference. Furthermore, we show that there is a design trade-off between an optimum optical modulation index in the transmitter side and the receiver aperture size to achieve a required average CNIR ensuring a substantial scintillation fade reduction. We thus provide preliminary criteria for optimizing both the transmitter and the receiver design of our RF-FSO system. Using an experimental RF-FSO system, we conduct investigations to characterize the deployment environment influencing the transmission of wideband code division multiple access (W-CDMA) signals over a 1 km free-space optical communication (FSO) link. Important performance metric parameters like the CNIR and adjacent channel leakage ratio are measured and analyzed to quantify the influence of atmospheric effects. We then validate the proposed mathematical model by performing a comparison with the experimental results obtained from the W-CDMA signal transmission over RF-FSO experiments. The presented work can be used as a baseline for the design and performance evaluation of FSO systems able to transmit different broadband wireless services signals.
- 29 April 2011
- Published by Optica Publishing Group in Journal of Optical Communications and Networking
- Vol. 3 (5) , 475-486
Performance Analysis of CDMA-Based Wireless Services Transmission Over a Turbulent RF-on-FSO Channel
This paper proposes a theoretical and experimental performance study to characterize the transmission of code-division-multiple-access-based wireless signals over a radio frequency on free-space optical (RF-FSO) system using an aperture averaging (AA) technique. First, we propose an analytical model including the carrier-to-noise-plus-interference ratio (CNIR) and outage probability expressions taking into consideration the use of the AA technique, the laser diode nonlinear distortion, and the multiple-access interference. Furthermore, we show that there is a design trade-off between an optimum optical modulation index in the transmitter side and the receiver aperture size to achieve a required average CNIR ensuring a substantial scintillation fade reduction. We thus provide preliminary criteria for optimizing both the transmitter and the receiver design of our RF-FSO system. Using an experimental RF-FSO system, we conduct investigations to characterize the deployment environment influencing the transmission of wideband code division multiple access (W-CDMA) signals over a 1 km free-space optical communication (FSO) link. Important performance metric parameters like the CNIR and adjacent channel leakage ratio are measured and analyzed to quantify the influence of atmospheric effects. We then validate the proposed mathematical model by performing a comparison with the experimental results obtained from the W-CDMA signal transmission over RF-FSO experiments. The presented work can be used as a baseline for the design and performance evaluation of FSO systems able to transmit different broadband wireless services signals.
- 31 March 2011
- Published by Korea Information Processing Society in Journal of Information Processing Systems
- Vol. 7 (1) , 17-28
A Single Mobile Target Tracking in Voronoi-based Clustered Wireless Sensor Network
- 31 March 2011
- Published by Korea Information Processing Society in Journal of Information Processing Systems
- Vol. 7 (1) , 17-28
A Single Mobile Target Tracking in Voronoi-based Clustered Wireless Sensor Network
- Open Access
- 14 December 2010
- Published by IntechOpen
A Gaussian Mixture Model-based Event-Driven Continuous Boundary Detection in 3D Wireless Sensor Networks
- 14 December 2010
- Published by IntechOpen
Open AccessA Gaussian Mixture Model-based Event-Driven Continuous Boundary Detection in 3D Wireless Sensor Networks
- Open Access
Modeling the Energy Performance of Event-Driven Wireless Sensor Network by Using Static Sink and Mobile Sink
Wireless Sensor Networks (WSNs) designed for mission-critical applications suffer from limited sensing capacities, particularly fast energy depletion. Regarding this, mobile sinks can be used to balance the energy consumption in WSNs, but the frequent location updates of the mobile sinks can lead to data collisions and rapid energy consumption for some specific sensors. This paper explores an optimal barrier coverage based sensor deployment for event driven WSNs where a dual-sink model was designed to evaluate the energy performance of not only static sensors, but Static Sink (SS) and Mobile Sinks (MSs) simultaneously, based on parameters such as sensor transmission range r and the velocity of the mobile sink v, etc. Moreover, a MS mobility model was developed to enable SS and MSs to effectively collaborate, while achieving spatiotemporal energy performance efficiency by using the knowledge of the cumulative density function (cdf), Poisson process and M/G/1 queue. The simulation results verified that the improved energy performance of the whole network was demonstrated clearly and our eDSA algorithm is more efficient than the static-sink model, reducing energy consumption approximately in half. Moreover, we demonstrate that our results are robust to realistic sensing models and also validate the correctness of our results through extensive simulations.
Open AccessModeling the Energy Performance of Event-Driven Wireless Sensor Network by Using Static Sink and Mobile Sink
Wireless Sensor Networks (WSNs) designed for mission-critical applications suffer from limited sensing capacities, particularly fast energy depletion. Regarding this, mobile sinks can be used to balance the energy consumption in WSNs, but the frequent location updates of the mobile sinks can lead to data collisions and rapid energy consumption for some specific sensors. This paper explores an optimal barrier coverage based sensor deployment for event driven WSNs where a dual-sink model was designed to evaluate the energy performance of not only static sensors, but Static Sink (SS) and Mobile Sinks (MSs) simultaneously, based on parameters such as sensor transmission range r and the velocity of the mobile sink v, etc. Moreover, a MS mobility model was developed to enable SS and MSs to effectively collaborate, while achieving spatiotemporal energy performance efficiency by using the knowledge of the cumulative density function (cdf), Poisson process and M/G/1 queue. The simulation results verified that the improved energy performance of the whole network was demonstrated clearly and our eDSA algorithm is more efficient than the static-sink model, reducing energy consumption approximately in half. Moreover, we demonstrate that our results are robust to realistic sensing models and also validate the correctness of our results through extensive simulations.
- Open Access
A Gaussian Mixture Model-Based Continuous Boundary Detection for 3D Sensor Networks
This paper proposes a high precision Gaussian Mixture Model-based novel Boundary Detection 3D (BD3D) scheme with reasonable implementation cost for 3D cases by selecting a minimum number of Boundary sensor Nodes (BNs) in continuous moving objects. It shows apparent advantages in that two classes of boundary and non-boundary sensor nodes can be efficiently classified using the model selection techniques for finite mixture models; furthermore, the set of sensor readings within each sensor node’s spatial neighbors is formulated using a Gaussian Mixture Model; different from DECOMO [1] and COBOM [2], we also formatted a BN Array with an additional own sensor reading to benefit selecting Event BNs (EBNs) and non-EBNs from the observations of BNs. In particular, we propose a Thick Section Model (TSM) to solve the problem of transition between 2D and 3D. It is verified by simulations that the BD3D 2D model outperforms DECOMO and COBOM in terms of average residual energy and the number of BNs selected, while the BD3D 3D model demonstrates sound performance even for sensor networks with low densities especially when the value of the sensor transmission range (r) is larger than the value of Section Thickness (d) in TSM. We have also rigorously proved its correctness for continuous geometric domains and full robustness for sensor networks over 3D terrains.
Open AccessA Gaussian Mixture Model-Based Continuous Boundary Detection for 3D Sensor Networks
This paper proposes a high precision Gaussian Mixture Model-based novel Boundary Detection 3D (BD3D) scheme with reasonable implementation cost for 3D cases by selecting a minimum number of Boundary sensor Nodes (BNs) in continuous moving objects. It shows apparent advantages in that two classes of boundary and non-boundary sensor nodes can be efficiently classified using the model selection techniques for finite mixture models; furthermore, the set of sensor readings within each sensor node’s spatial neighbors is formulated using a Gaussian Mixture Model; different from DECOMO [1] and COBOM [2], we also formatted a BN Array with an additional own sensor reading to benefit selecting Event BNs (EBNs) and non-EBNs from the observations of BNs. In particular, we propose a Thick Section Model (TSM) to solve the problem of transition between 2D and 3D. It is verified by simulations that the BD3D 2D model outperforms DECOMO and COBOM in terms of average residual energy and the number of BNs selected, while the BD3D 3D model demonstrates sound performance even for sensor networks with low densities especially when the value of the sensor transmission range (r) is larger than the value of Section Thickness (d) in TSM. We have also rigorously proved its correctness for continuous geometric domains and full robustness for sensor networks over 3D terrains.
- 12 February 2009
- Published by SPIE-Intl Soc Optical Eng
- Vol. 7199, 719907
Experimental evaluation of a radio-on-FSO communication system for multiple RF signal transmission
In this paper we present the design concept plus experimental results and evaluation of a newly developed advanced DWDM Radio-on-Free-Space Optical (RoFSO) communication system capable of simultaneous transmission of multiple RF signals. The RoFSO system is evaluated based on the performance metric parameters defined for the various RF signals comprising of different wireless services including terrestrial digital broadcasting signals, cellular 3GPP W-CDMA signals, IEEE 802.11 WLAN based signals etc being transmitted over the RoFSO link. The performance metric parameters being considered include standard optical received power, CNR and BER characteristics, W-CDMA signal transmission metric parameters like Adjacent Channel Leakage Ratio (ACLR) and Error Vector Magnitude (EVM), modulation error ratio (MER) for digital terrestrial television broadcasting signals as well as spectrum mask and EVM for IEEE 802.11 Wireless LAN signal transmission.
- 12 February 2009
- Published by SPIE-Intl Soc Optical Eng
- Vol. 7199, 719907
Experimental evaluation of a radio-on-FSO communication system for multiple RF signal transmission
In this paper we present the design concept plus experimental results and evaluation of a newly developed advanced DWDM Radio-on-Free-Space Optical (RoFSO) communication system capable of simultaneous transmission of multiple RF signals. The RoFSO system is evaluated based on the performance metric parameters defined for the various RF signals comprising of different wireless services including terrestrial digital broadcasting signals, cellular 3GPP W-CDMA signals, IEEE 802.11 WLAN based signals etc being transmitted over the RoFSO link. The performance metric parameters being considered include standard optical received power, CNR and BER characteristics, W-CDMA signal transmission metric parameters like Adjacent Channel Leakage Ratio (ACLR) and Error Vector Magnitude (EVM), modulation error ratio (MER) for digital terrestrial television broadcasting signals as well as spectrum mask and EVM for IEEE 802.11 Wireless LAN signal transmission.
- 24 January 2009
- Published by SPIE-Intl Soc Optical Eng
- Vol. 7234, 723404
Research and development of a next-generation free-space optical communication system
Achieving an all-optical connection between any wireless communication systems with optical fiber network is one of the ultimate goals of communication network design. An all-optical system providing seamless connection between freespace and optical fiber links by using free-space optical (FSO) communication technology suitable for next generation network has been developed. In order to realize this next-generation FSO communication system in which the transmitted light signal does not undergo any conversion thus achieving all-optical connection, it is necessary to develop a technology for tracking and focusing the free-space optical signal to a single mode fiber (SMF). The developed FSO system incorporates a fine pointing mirror (FPM) for high speed beam control and steering. This novel tracking method can suppress the beam intensity variations as a result of angle-of-arrival fluctuation (AOA) caused by atmospheric turbulence. This paper presents experimental results of a next-generation FSO system providing stable and reliable single channel transmission at 10 Gbps data rates as well as multiple channels using dense wavelength division multiplexing (DWDM). This kind of data rate is not possible to achieve using conventional FSO systems. The developed system can provide transmission capacity equivalent to optical fiber and from its design concept and configuration it is bit-rate and protocol transparent. Furthermore, we present research on Radio-on-FSO (RoFSO) system which is a combination of the developed nextgeneration FSO system and Radio over Fiber (RoF) technology. We demonstrate the possibility of utilizing this system for optical and radio frequency signals transmission. RoFSO technology is independent of the difference in the underlying physical layers for radio system or fiber system, but realizing fusion at the service level. The RoFSO technology is available to realize a universal platform for transparent forwarding various wireless services in a ubiquitous network environment.
- 24 January 2009
- Published by SPIE-Intl Soc Optical Eng
- Vol. 7234, 723404
Research and development of a next-generation free-space optical communication system
Achieving an all-optical connection between any wireless communication systems with optical fiber network is one of the ultimate goals of communication network design. An all-optical system providing seamless connection between freespace and optical fiber links by using free-space optical (FSO) communication technology suitable for next generation network has been developed. In order to realize this next-generation FSO communication system in which the transmitted light signal does not undergo any conversion thus achieving all-optical connection, it is necessary to develop a technology for tracking and focusing the free-space optical signal to a single mode fiber (SMF). The developed FSO system incorporates a fine pointing mirror (FPM) for high speed beam control and steering. This novel tracking method can suppress the beam intensity variations as a result of angle-of-arrival fluctuation (AOA) caused by atmospheric turbulence. This paper presents experimental results of a next-generation FSO system providing stable and reliable single channel transmission at 10 Gbps data rates as well as multiple channels using dense wavelength division multiplexing (DWDM). This kind of data rate is not possible to achieve using conventional FSO systems. The developed system can provide transmission capacity equivalent to optical fiber and from its design concept and configuration it is bit-rate and protocol transparent. Furthermore, we present research on Radio-on-FSO (RoFSO) system which is a combination of the developed nextgeneration FSO system and Radio over Fiber (RoF) technology. We demonstrate the possibility of utilizing this system for optical and radio frequency signals transmission. RoFSO technology is independent of the difference in the underlying physical layers for radio system or fiber system, but realizing fusion at the service level. The RoFSO technology is available to realize a universal platform for transparent forwarding various wireless services in a ubiquitous network environment.
- 24 January 2009
- Published by SPIE-Intl Soc Optical Eng
- Vol. 7234, 72340L
RoFSO channel modeling considering time-correlation of scintillation and its application to performance evaluation of WLAN signal transmission
This paper firstly derives a new model of RoFSO (Radio on Free Space Optics) channel considering fluctuation speed of the scintillation and the probability density function (p.d.f) of the random and time-correlated optical intensity disturbed by scintillation. The relationships among frequency characteristic of RoFSO channel, variance of received optical intensity and atmospheric conditions (temperature and insolation) are statistically analyzed by the proposed model. By using the proposed model and the relationships, the throughput performance of WLAN (802.11a) over RoFSO link is evaluated with computer simulations. For two cases of without-shadowing and with-shadowing in the radio propagation channel, evaluations of degradation due to scintillation are conducted. As a result, it is found that the degradation due to scintillation is much smaller than that due to shadowing in the throughput performance for WLAN.
- 24 January 2009
- Published by SPIE-Intl Soc Optical Eng
- Vol. 7234, 72340L
RoFSO channel modeling considering time-correlation of scintillation and its application to performance evaluation of WLAN signal transmission
This paper firstly derives a new model of RoFSO (Radio on Free Space Optics) channel considering fluctuation speed of the scintillation and the probability density function (p.d.f) of the random and time-correlated optical intensity disturbed by scintillation. The relationships among frequency characteristic of RoFSO channel, variance of received optical intensity and atmospheric conditions (temperature and insolation) are statistically analyzed by the proposed model. By using the proposed model and the relationships, the throughput performance of WLAN (802.11a) over RoFSO link is evaluated with computer simulations. For two cases of without-shadowing and with-shadowing in the radio propagation channel, evaluations of degradation due to scintillation are conducted. As a result, it is found that the degradation due to scintillation is much smaller than that due to shadowing in the throughput performance for WLAN.