APAvin Pillay

Avin Pillay

*This is an algorithmically generated author record based on publicly available information.

Avin Pillay has a total of 20 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Sustainability Study on Heavy Metal Uptake in Neem Biodiesel Using Selective Catalytic Preparation and Hyphenated Mass Spectrometry

    by Mirella Elkadi, Avin Pillay, Johnson Manuel, Mohammad Zubair Khan, Sasi Stephen, Arman Molki

    It is common knowledge that the presence of trace metals in biofuels can be detrimental to the environment and long-term sustainable development. This study provides an insight into selective catalytic preparation of biofuel to compare uptake of trace metals in the biodiesel fraction with preferential base catalysts. The role of specific metal hydroxides in controlling trace metal content in biofuel production is relatively unexplored, and the effect of different homogeneous catalysts (NaOH, KOH) on metal retention in biodiesel from commercial neem oil was examined. A detailed study of this nature of catalyst vs. metal uptake is in the interest of sustainable living and could make a significant contribution to biofuels research. Both catalysts displayed variable uptake for certain toxic elements, which was attributed to the behavior of the catalyst in the reaction mixture. A general comparison reflected specific trends in metal retention (ICP-MS) with the use of different base catalysts. Challenges encountered by extending the study and using a heterogeneous catalyst (CaO) are presented. Our work could play a significant role in influencing catalyzed transesterfication processes to control elemental and toxic metal uptake in biofuels. The impact of our work on sustainable living is presented.


  • Open Access

    Real-Time Study of Noxious Gas Emissions and Combustion Efficiency of Blended Mixtures of Neem Biodiesel and Petrodiesel

    by Avin Pillay, Arman Molki, Mirella Elkadi, Johnson Manuel, Shrinivas Bojanampati, Mohammed Khan, Sasi Stephen

    Neem biodiesel is currently being explored as a future biofuel and was extracted chemically from the vegetable oil. Many of its properties are still under investigation and our aim was to study its noxious-gas emission profiles from blends with regular petroleum diesel. The distinct advantage of a real-time study is acquisition of in situ data on the combustion behavior of gas components with actual progression of time. Mixtures of neem biodiesel and petroleum diesel corresponding to neem additives of 5%, 10%, 15% and 25% were tested for combustion efficiency and emitted gases using a high-performance gas analyzer. Our study, therefore, investigated the overall efficiency of the combustion process linked to emissions of the following gases: O2, CO2, NO, NOx and SO2. The results for the 95/5% blend compared to the neat sample were most promising and showed no serious change in performance efficiency (x emission trends displayed maxima/minima, suggestive of interconvertible chemical reactivity. Declining CO and SO2 emissions were consistent with rapid chemical conversion. The CO and SO2 concentrations fell well below the toxic atmospheric limits in less than 300 s. The results are generally encouraging for blends below 10%. The potential environmental impact of the study is discussed.


  • Depth Profiling (ICP-MS) Study of Trace Metal ‘Grains’ in Solid Asphaltenes

    by Avin E. Pillay, Ghada Bassioni, Sasi Stephen, Fritz E. Kühn

    Knowledge of trace metal ‘grains’ in asphaltenes could play a significant role in enhancing refining and processing of crudes and also in providing useful information on mechanistic and migratory features linked to asphaltenes. These metals originate directly from interaction of oils with source-rock, mineral matter, and formation water and their accumulation in asphaltene matrices could vary from oil well to oil well. Suitable asphaltene samples were subjected to high-performance ICP-MS laser depth profiling (213 nm) to depths of 50 μm at 5 μm intervals. The study was conducted in the absence of standardization and characteristic intensities originating from the metals of interest were measured. Ten metal profiles were investigated (Na, Mg, Al, Mn, Fe, Zn, Sr, Pb, V, and Ni). The experimental results showed non-uniform distribution of trace metals and identified areas where such metals agglomerate. The data suggested that certain chemical and physical conditions within the structure of asphaltenes are favorable for metal ‘grain’ formation at specific points. The exact mechanism for this behavior is not clear at this stage, and has considerable scope for future studies, including mathematical modeling simulations of asphaltenes. We also found that solid asphaltenes could be a useful forerunner of scale formation.


  • Open Access

    Depth Profiling (ICP-MS) Study of Toxic Metal Buildup in Concrete Matrices: Potential Environmental Impact

    by Mirella Elkadi, Avin Pillay, Sai Cheong Fok, Fadi Feghali, Ghada Bassioni, Sasi Stephen

    This paper explores the potential of concrete material to accumulate toxic trace elements using ablative laser technology (ICP-MS). Concrete existing in offshore structures submerged in seawater acts as a sink for hazardous metals, which could be gradually released into the ocean creating pollution and anoxic conditions for marine life. Ablative laser technology is a valuable tool for depth profiling concrete to evaluate the distribution of toxic metals and locate internal areas where such metals accumulate. Upon rapid degradation of concrete these “hotspots” could be suddenly released, thus posing a distinct threat to aquatic life. Our work simulated offshore drilling conditions by immersing concrete blocks in seawater and investigating accumulated toxic trace metals (As, Be, Cd, Hg, Os, Pb) in cored samples by laser ablation. The experimental results showed distinct inhomogeneity in metal distribution. The data suggest that conditions within the concrete structure are favorable for random metal accumulation at certain points. The exact mechanism for this behavior is not clear at this stage and has considerable scope for extended research including modeling and remedial studies.


  • Open Access

    Radioactivity in Oily Sludge and Produced Waste Water from Oil: Environmental Concerns and Potential Remedial Measures

    by Avin E. Pillay, Fadhil M. Salih, Muthana I. Maleek

    Produced water separated from oil is usually returned to the environment and could permeate through the water table. If such water is contaminated with radioactive substances, it could create a definite threat to the water supply, especially in arid regions where ground water and overhead streams are sources of potable water. Low-level radioactive contamination of oily sludge is equally hazardous and also leads to detrimental pollution of water resources. We investigated the distribution of 226Ra, 40K and 228Ac in produced waste water and oily sludge and found abnormal levels of radioactivity. A total of 90 ground wastewater samples were collected from different sites for a period of one year. The presence of these radionuclides was identified by their characteristic gamma rays. The detection system consisted of a high-purity germanium detector. Our results show that about 20% of the samples exhibited 20–60 Bq/L radioactivity and ~6% of the samples exceeded 60 Bq/L. Roughly 70% of the experimental samples fell in the range of 2–20 Bq/L, which still exceeded the maximum admissible drinking-water limit 0.2 Bq/L.


  • Report: 2nd World Future Energy Summit, Abu Dhabi, 19–21 January 2009

    by Avin Pillay, Mirella Elkadi

    The Masdar Initiative, host of the 2nd World Future Energy Summit, 2009 (WFES), was launched by Abu Dhabi’s Government in 2006 and aims to establish Abu Dhabi as a global leader in renewable energy. WFES 2009 was the world’s largest conference and exhibition on renewable and future energy solutions, innovations, investments, policy and vision. The summit successfully brought together leading experts in the fields of climate change and alternative energy to present plans and strategies for clean energy solutions. The event was widely publicised and signalled the dawn of a new era for future energy. It was supported by more than 16,000 delegates and guests, and about 350 corporate bodies specialising in green technologies. The event showcased a fascinating display of new ideas and future technologies by a broad array of entrepreneurs and innovators. A hybrid fuel‐efficient SUV, advanced energy‐saving LED lighting and humanoid service robots to assist in constructing green homes were some of the innovations. The presence of royal personages and more than 100 ministers, senior government officials and corporate leaders made the event truly spectacular. Masdar was at the centre of a revolutionary initiative to propel the world into the age of future energy [ 1 Daily News. 2009. Official Summit Daily Newspaper, 20 January 1–15. [Google Scholar] ].


  • Open Access

    Mercury pollution from irrigation with treated sewage water (TSW)

    by A. E. Pillay, B. Yaghi, J. R. Williams, S. Al-Kindy

    The lack of potable water in arid countries leads to the use of treated sewage water (TSW) for crop growth. Mercury accumulation (up to 500 ng/g) in agricultural soil originating from daily irrigation with TSW was found at two sites fed separately from a hospital sewage plant and an industrial plant. A control site irrigated with potable water ([Hg] <0.01 ng/ml) had much reduced levels in soil (<12 ng/g). Cold-vapour analysis of TSW revealed that Hg concentrations fluctuated widely, and were between 10-100 times higher than those of potable water. The TSW data originated from a total of 46 samples (1L each), from both plants, collected over a 6-month period. The Hg levels varied from 0.1 to 1.0 ng/ml, which suggested that the possible source of the accumulation could be found in continuous irrigation with comparatively higher Hg levels. Remedial measures could be approached from the perspective of curbing this inconsistency to produce more consistent Hg concentrations below 0.5 ng/ml. It was found that the electrical conductivity of TSW is a useful indicator to rapidly monitor fluctuations in treatment. A novel development in the study was the potential capacity of the plastic TSW discharge-pipes to behave as crude ‘chromatographic’ columns for possible Hg adsorption. If this property of the pipes is developed further it could have a considerable mitigating effect on the Hg levels. Possible recommendations for remediation to limit the Hg levels and promote sustainable development are discussed.


  • Efficiency of solar water disinfection photocatalized by titanium dioxide of varying particle size

    by F. M. Salih, A. E. Pillay

    Titanium dioxide photocatalysed water disinfection is induced by the interaction of light with TiO2, which generates highly reactive free hydroxyl radicals (OH•). These free radicals create lethal damage that leads to bacterial death. Normally, decreasing TiO2 particle size increases the area of light interaction. This may possibly increase the concentration of OH• generated and hence increases disinfection efficiency. Moreover, decreasing the particle size increases the force of attraction between the particles and cells, which could create aggregates that may contribute to the local OH• concentration. In the present investigation cells of Escherichia coli were used as the test microorganism, TiO2 as the photocatalyst and sunlight as the light source. Four different surface areas of TiO2 particles corresponding to 10, 50, 80–100 and ≥300 m2 g−1 were tested at a concentration of 1 g l−1. Disinfection efficiency increased with increasing the surface area producing a maximum between 80–100 m2 g−1 followed by a reduction at ≥300 m2 g−1. The reduction in the efficiency at this relatively high surface area was attributed to the increase in the local concentration of OH•. This increase may be high enough to initiate radical-radical interaction that would compete with bacterial cells and reduce the chance of bacterial cell-radical interaction taking place. Moreover, the phenomenon of TiO2 aggregation with bacterial cells plays an important role, and the extent of aggregation increases with decreasing particle size. Such aggregation could augment the concentration of OH• within the cell vicinity. This suggests that surface area is a key factor in determining the efficiency of disinfection, and that concentration is a vital factor.