Martin Wanielista
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Martin Wanielista has a total of 15 co-authors. Here are the top co-authors by number of shared publications:
- Manoj Chopra
Univ. of Central Florida
3 shared publications - Ni-Bin Chang
Department of Civil, Environmental, and Construction Engineering, University of Central Florida, Orlando, FL, USA
2 shared publications - Andrew Corrado
University of Central Florida, Civil, Environmental, And Construction Engineering Dept. 4000 Central Florida Blvd., Orlando, Fl, 32816, USA
1 shared publication - Andrew Hood
Stormwater Management Academy, Department of Civil, Environmental, and Construction Engineering, University of Central Florida, 4000 Central Florida Blvd., Orlando, FL 32816-2450, USA
1 shared publication - Cameron Houmann
Department of Civil, Environmental, and Construction Engineering, University of Central Florida, Orlando, FL, USA
1 shared publication - Christopher R. Hagglund
Department of Civil, Environmental and Construction Engineering, University of Central Florida, 12800 Pegasus Drive, Suite 211, Orlando, FL 32816-2450, USA
1 shared publication
Latest Publications
- 1 December 2021
- Published by Elsevier in Journal of Environmental Management
- Vol. 300, 113747
Hydraulic and nutrient removal performance of vegetated filter strips with engineered infiltration media for treatment of roadway runoff
- 1 December 2021
- Published by Elsevier in Journal of Environmental Management
- Vol. 300, 113747
Hydraulic and nutrient removal performance of vegetated filter strips with engineered infiltration media for treatment of roadway runoff
- 1 February 2016
- Published by Elsevier in Chemosphere
- Vol. 144, 1098-1105
Scaling up adsorption media reactors for copper removal with the aid of dimensionless numbers
- 1 February 2016
- Published by Elsevier in Chemosphere
- Vol. 144, 1098-1105
Scaling up adsorption media reactors for copper removal with the aid of dimensionless numbers
- 1 January 2015
- Published by Elsevier in Science of The Total Environment
- Vol. 502, 434-447
Reliability analysis of nutrient removal from stormwater runoff with green sorption media under varying influent conditions
- 1 January 2015
- Published by Elsevier in Science of The Total Environment
- Vol. 502, 434-447
Reliability analysis of nutrient removal from stormwater runoff with green sorption media under varying influent conditions
- 1 January 2014
- Published by Elsevier
- p. 625-649
Tracer-based System Dynamic Modeling for Designing a Subsurface Upflow Wetland for Nutrient Removal
- 1 January 2014
- Published by Elsevier
- p. 625-649
Tracer-based System Dynamic Modeling for Designing a Subsurface Upflow Wetland for Nutrient Removal
- Open Access
Assessment of Biosorption Activated Media Under Roadside Swales for the Removal of Phosphorus from Stormwater
Stormwater runoff from highways is a source of pollution to surface water bodies and groundwater. Excess loadings of phosphorus in stormwater discharged to surface water bodies can result in eutrophication. Treatment of stormwater for phosphorus is necessary in order to sustain ecological and economical benefits related to aquatic resources. If phosphorus is removed, the water can be sustained for other uses, such as irrigation and industrial applications. The data presented in this paper is used to evaluate the treatment performance of a roadside biosorption activated media system with regards to the removal of total phosphorus and soluble reactive phosphorus from highway runoff. The evaluation also compares removal efficiencies and effluent concentrations using biosorption activated media (BAM) to that with sandy soil commonly found in the Florida area. The results presented in this paper indicate that BAM bio-filtration systems are a feasible treatment method for removing phosphorus from highway runoff. A discussion concerning the additional treatment and reuse of water by harvesting, as part of a Bio-filtration & Harvesting Swale System, is also presented in the paper.
Open AccessAssessment of Biosorption Activated Media Under Roadside Swales for the Removal of Phosphorus from Stormwater
Stormwater runoff from highways is a source of pollution to surface water bodies and groundwater. Excess loadings of phosphorus in stormwater discharged to surface water bodies can result in eutrophication. Treatment of stormwater for phosphorus is necessary in order to sustain ecological and economical benefits related to aquatic resources. If phosphorus is removed, the water can be sustained for other uses, such as irrigation and industrial applications. The data presented in this paper is used to evaluate the treatment performance of a roadside biosorption activated media system with regards to the removal of total phosphorus and soluble reactive phosphorus from highway runoff. The evaluation also compares removal efficiencies and effluent concentrations using biosorption activated media (BAM) to that with sandy soil commonly found in the Florida area. The results presented in this paper indicate that BAM bio-filtration systems are a feasible treatment method for removing phosphorus from highway runoff. A discussion concerning the additional treatment and reuse of water by harvesting, as part of a Bio-filtration & Harvesting Swale System, is also presented in the paper.
- 1 January 2013
- Published by American Society of Civil Engineers (ASCE) in Journal of Irrigation and Drainage Engineering
- Vol. 139 (1) , 55-65
Integrated Surface–Groundwater Model for Storm-Water Harvesting Using Basic Mass Balance Principles
Storm-water harvesting from a pond for irrigation of adjacent lands is promoted as one way that may reduce pond discharge while supplementing valuable potable water used for irrigation. Reduction of pond discharge reduces the mass of pollutants in the discharge. In this study, a storm water harvesting and assessment for reduction of pollution (SHARP) model was developed to predict operation of a wet pond used for storm-water harvesting at Miramar Lakes, Miramar, FL. The model integrates the interaction of surface water and groundwater in a catchment area. The SHARP model was calibrated and validated for pond-water elevation. Model evaluation showed adequate prediction of pond-water elevation with root mean square error (RMSE) between 0.07 and 0.12 m, mean absolute error (MAE) between 0.018 and 0.07 m, and relative index of agreement () between 0.74 and 0.98 for both calibration and validation periods. The SHARP model is capable of assessing harvest safe yield and discharge from a pond, including the prediction of the percentage of runoff into a harvesting pond that is not discharged.- 1 January 2013
- Published by American Society of Civil Engineers (ASCE) in Journal of Irrigation and Drainage Engineering
- Vol. 139 (1) , 55-65
Integrated Surface–Groundwater Model for Storm-Water Harvesting Using Basic Mass Balance Principles
Storm-water harvesting from a pond for irrigation of adjacent lands is promoted as one way that may reduce pond discharge while supplementing valuable potable water used for irrigation. Reduction of pond discharge reduces the mass of pollutants in the discharge. In this study, a storm water harvesting and assessment for reduction of pollution (SHARP) model was developed to predict operation of a wet pond used for storm-water harvesting at Miramar Lakes, Miramar, FL. The model integrates the interaction of surface water and groundwater in a catchment area. The SHARP model was calibrated and validated for pond-water elevation. Model evaluation showed adequate prediction of pond-water elevation with root mean square error (RMSE) between 0.07 and 0.12 m, mean absolute error (MAE) between 0.018 and 0.07 m, and relative index of agreement () between 0.74 and 0.98 for both calibration and validation periods. The SHARP model is capable of assessing harvest safe yield and discharge from a pond, including the prediction of the percentage of runoff into a harvesting pond that is not discharged.- Open Access
A Mass Balance Model for Designing Green Roof Systems that Incorporate a Cistern for Re-Use
Green roofs, which have been used for several decades in many parts of the world, offer a unique and sustainable approach to stormwater management. Within this paper, evidence is presented on water retention for an irrigated green roof system. The presented green roof design results in a water retention volume on site. A first principle mass balance computer model is introduced to assist with the design of these green roof systems which incorporate a cistern to capture and reuse runoff waters for irrigation of the green roof. The model is used to estimate yearly stormwater retention volume for different cistern storage volumes. Additionally, the Blaney and Criddle equation is evaluated for estimation of monthly evapotranspiration rates for irrigated systems and incorporated into the model. This is done so evapotranspiration rates can be calculated for regions where historical data does not exist, allowing the model to be used anywhere historical weather data are available. This model is developed and discussed within this paper as well as compared to experimental results.
Open AccessA Mass Balance Model for Designing Green Roof Systems that Incorporate a Cistern for Re-Use
Green roofs, which have been used for several decades in many parts of the world, offer a unique and sustainable approach to stormwater management. Within this paper, evidence is presented on water retention for an irrigated green roof system. The presented green roof design results in a water retention volume on site. A first principle mass balance computer model is introduced to assist with the design of these green roof systems which incorporate a cistern to capture and reuse runoff waters for irrigation of the green roof. The model is used to estimate yearly stormwater retention volume for different cistern storage volumes. Additionally, the Blaney and Criddle equation is evaluated for estimation of monthly evapotranspiration rates for irrigated systems and incorporated into the model. This is done so evapotranspiration rates can be calculated for regions where historical data does not exist, allowing the model to be used anywhere historical weather data are available. This model is developed and discussed within this paper as well as compared to experimental results.