Anna Musyanovych
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Anna Musyanovych has a total of 16 co-authors. Here are the top co-authors by number of shared publications:
- Katharina Landfester
Max Planck Institute for Polymer Research, Ackermannweg 10, 55128 Mainz, Germany
8 shared publications - Volker Mailänder
Max Planck Institute for Polymer Research, Ackermannweg 10, 55128 Mainz, Germany
3 shared publications Grit Baier
Max Planck Institute for Polymer Research, Ackermannweg 10, 55128 Mainz, Germany
2 shared publicationsAndreas Best
Max Planck Institute for Polymer Research, Ackermannweg 10, 55128 Mainz, Germany
1 shared publicationAnita Höcherl
Max Planck Institute for Polymer Research, Ackermannweg 10, 55128 Mainz, Germany
1 shared publicationAnke Ziegler
Max Planck Institute for Polymer Research
1 shared publication
Latest Publications
- 8 April 2014
- Published by Wiley in Macromolecular Bioscience
- Vol. 14 (8) , 1076-1083
pH‐Sensitive Chitosan‐based Hydrogel Nanoparticles through Miniemulsion Polymerization Mediated by Peroxide Containing Macromonomer
New type of hydrogel nanoparticles (HNp) based on chitosan are synthesized by the free radical graft-copolymerization reaction of peroxide containing chitosan derivative and 1-vinyl-2-pyrrolidone (VP) in the inverse miniemulsion droplets. Free radicals are formed upon thermal decomposition of the peroxide groups that are attached to the chitosan chain. After introduction of the cross-linker N,N-methylenebisacrylamide, more densely cross-linked HNp with a lower pH-dependant swelling rate are produced. The release behavior is investigated by fluorescence measurements using HNp loaded with either anionic sulforhodamine 101 or cationic rhodamine 123 fluorescent dye. The obtained results revealed that the crucial points in the release kinetic are the nature of used “payload” molecules and their interaction with the hydrogel matrix. Synthesized HNp are of potential interest for diverse biomedical applications including controlled drug release and diagnostic.
- 8 April 2014
- Published by Wiley in Macromolecular Bioscience
- Vol. 14 (8) , 1076-1083
pH‐Sensitive Chitosan‐based Hydrogel Nanoparticles through Miniemulsion Polymerization Mediated by Peroxide Containing Macromonomer
New type of hydrogel nanoparticles (HNp) based on chitosan are synthesized by the free radical graft-copolymerization reaction of peroxide containing chitosan derivative and 1-vinyl-2-pyrrolidone (VP) in the inverse miniemulsion droplets. Free radicals are formed upon thermal decomposition of the peroxide groups that are attached to the chitosan chain. After introduction of the cross-linker N,N-methylenebisacrylamide, more densely cross-linked HNp with a lower pH-dependant swelling rate are produced. The release behavior is investigated by fluorescence measurements using HNp loaded with either anionic sulforhodamine 101 or cationic rhodamine 123 fluorescent dye. The obtained results revealed that the crucial points in the release kinetic are the nature of used “payload” molecules and their interaction with the hydrogel matrix. Synthesized HNp are of potential interest for diverse biomedical applications including controlled drug release and diagnostic.
- 11 April 2012
- Published by American Chemical Society (ACS) in Macromolecules
- Vol. 45 (8) , 3419-3427
Surface Click Reactions on Polymeric Nanocapsules for Versatile Functionalization
- 11 April 2012
- Published by American Chemical Society (ACS) in Macromolecules
- Vol. 45 (8) , 3419-3427
Surface Click Reactions on Polymeric Nanocapsules for Versatile Functionalization
- 23 February 2012
- Published by Wiley in Macromolecular Bioscience
- Vol. 12 (4) , 454-464
Competitive Cellular Uptake of Nanoparticles Made From Polystyrene, Poly(methyl methacrylate), and Polylactide
The uptake behavior of negatively charged fluorescent nanoparticles made from different polymers (PS, PMMA, and PLLA) is studied on HeLa cells. All particles are obtained by the miniemulsion process using sodium dodecylsulfate as anionic surfactant. The size of the particles is in the range 105–125 nm. Cell uptake is analyzed by flow cytometry and reveals a higher uptake of PLLA particles compared to PMMA and PS particles. In competitive uptake studies two different types of particles are co‐incubated with the HeLa cells; the results indicate a mutual influence of the particles on their uptake behavior. A reduced internalization of PLLA particles in the presence of PS particles is observed, although neither the co‐incubation of PMMA and PLLA nor of PMMA and PS shows similar effect. magnified image
- 23 February 2012
- Published by Wiley in Macromolecular Bioscience
- Vol. 12 (4) , 454-464
Competitive Cellular Uptake of Nanoparticles Made From Polystyrene, Poly(methyl methacrylate), and Polylactide
The uptake behavior of negatively charged fluorescent nanoparticles made from different polymers (PS, PMMA, and PLLA) is studied on HeLa cells. All particles are obtained by the miniemulsion process using sodium dodecylsulfate as anionic surfactant. The size of the particles is in the range 105–125 nm. Cell uptake is analyzed by flow cytometry and reveals a higher uptake of PLLA particles compared to PMMA and PS particles. In competitive uptake studies two different types of particles are co‐incubated with the HeLa cells; the results indicate a mutual influence of the particles on their uptake behavior. A reduced internalization of PLLA particles in the presence of PS particles is observed, although neither the co‐incubation of PMMA and PLLA nor of PMMA and PS shows similar effect. magnified image
- 1 December 2011
- Published by Elsevier in Acta Biomaterialia
- Vol. 7 (12) , 4160-4168
Criteria impacting the cellular uptake of nanoparticles: A study emphasizing polymer type and surfactant effects
- 1 December 2011
- Published by Elsevier in Acta Biomaterialia
- Vol. 7 (12) , 4160-4168
Criteria impacting the cellular uptake of nanoparticles: A study emphasizing polymer type and surfactant effects
- 6 May 2011
- Published by Wiley in Macromolecular Bioscience
- Vol. 11 (8) , 1099-1109
DNA Amplification via Polymerase Chain Reaction Inside Miniemulsion Droplets with Subsequent Poly(n‐butylcyanoacrylate) Shell Formation and Delivery of Polymeric Capsules into Mammalian Cells
There is a growing interest in the development of stable nanocapsules that could deliver the bioactive compounds within the living organism, and to release them without causing any toxic effects. Here the miniemulsion droplets were first used as “nanoreactors” for the amplification of single‐molecule dsDNA template (476 and 790 base pairs) through PCR. Afterwards, each droplet was surrounded with a biodegradable PBCA shell by interfacial anionic polymerization, enabling therefore to deliver the PCR products into the cells. The size of the initial miniemulsion droplets and the final polymeric capsules was in the range of 250 and 320 nm, mainly depending on the type of the continuous phase and presence of dsDNA template molecules. The formation of PCR products was resolved with gel electrophoresis and detected with fluorescence spectroscopy in the presence of DNA specific dye (SYBRGreen). TEM studies were performed to prove the formation of the polymeric shell. The shell thickness was measured to be within 5–15 nm and the average molecular weight of the formed PBCA polymer was around 75000 g · mol−1. For the cell uptake experiments, the obtained nanocapsules were transferred from the organic phase into aqueous medium containing a water‐soluble surfactant. The effect of the surfactant type (anionic, cationic or non‐ionic) on the HeLa cell viability and nanocapsule uptake behavior was studied by CLSM and FACS. Confocal analysis demonstrated that nanocapsules stabilized with cationic (CTMA‐Cl) and non‐ionic (Lutensol AT50) surfactants show almost the same uptake, whereas capsules redispersed in anionic (SDS) surfactant possess a 30% higher uptake. The release of the encapsulated material within the cell was studied on the example of Cy5‐labeled oligonucleotides showing the colocalization with mitochondria of MSCs cells. magnified image
- 6 May 2011
- Published by Wiley in Macromolecular Bioscience
- Vol. 11 (8) , 1099-1109
DNA Amplification via Polymerase Chain Reaction Inside Miniemulsion Droplets with Subsequent Poly(n‐butylcyanoacrylate) Shell Formation and Delivery of Polymeric Capsules into Mammalian Cells
There is a growing interest in the development of stable nanocapsules that could deliver the bioactive compounds within the living organism, and to release them without causing any toxic effects. Here the miniemulsion droplets were first used as “nanoreactors” for the amplification of single‐molecule dsDNA template (476 and 790 base pairs) through PCR. Afterwards, each droplet was surrounded with a biodegradable PBCA shell by interfacial anionic polymerization, enabling therefore to deliver the PCR products into the cells. The size of the initial miniemulsion droplets and the final polymeric capsules was in the range of 250 and 320 nm, mainly depending on the type of the continuous phase and presence of dsDNA template molecules. The formation of PCR products was resolved with gel electrophoresis and detected with fluorescence spectroscopy in the presence of DNA specific dye (SYBRGreen). TEM studies were performed to prove the formation of the polymeric shell. The shell thickness was measured to be within 5–15 nm and the average molecular weight of the formed PBCA polymer was around 75000 g · mol−1. For the cell uptake experiments, the obtained nanocapsules were transferred from the organic phase into aqueous medium containing a water‐soluble surfactant. The effect of the surfactant type (anionic, cationic or non‐ionic) on the HeLa cell viability and nanocapsule uptake behavior was studied by CLSM and FACS. Confocal analysis demonstrated that nanocapsules stabilized with cationic (CTMA‐Cl) and non‐ionic (Lutensol AT50) surfactants show almost the same uptake, whereas capsules redispersed in anionic (SDS) surfactant possess a 30% higher uptake. The release of the encapsulated material within the cell was studied on the example of Cy5‐labeled oligonucleotides showing the colocalization with mitochondria of MSCs cells. magnified image
- 1 January 2010
- Published by Springer Nature
- p. 417-428
Targeted Polymeric Nanoparticles
- Open Access
- 11 August 2009
- Published by Springer Nature in Colloid and Polymer Science
- Vol. 287 (11) , 1261-1271
Synthesis of phosphonate-functionalized polystyrene and poly(methyl methacrylate) particles and their kinetic behavior in miniemulsion polymerization
Phosphonate-functionalized polymer nanoparticles were synthesized by free-radical copolymerization of vinylphosphonic acid (VPA) with styrene or methyl methacrylate (MMA) using the miniemulsion technique. The influence of different parameters such as monomer and surfactant type, amount of vinylphosphonic acid on the average particle size, and size distribution was studied using dynamic light scattering and transmission electron microscopy. Depending on the amount and type of the surfactant used (ionic or non-ionic), phosphonate-functionalized particles in a size range from 102 to 312 nm can be obtained. The density of the phosphonate groups on the particle surface was higher in the case of using MMA as a basis monomer than polystyrene. The kinetic behavior of VPA copolymerization with styrene or MMA using a hydrophobic initiator was investigated by reaction calorimetry. Different kinetic curves were observed for miniemulsion (co)polymerization of styrene- and MMA-based nanoparticles indicating different nucleation mechanisms.
- 11 August 2009
- Published by Springer Nature in Colloid and Polymer Science
- Vol. 287 (11) , 1261-1271
Open AccessSynthesis of phosphonate-functionalized polystyrene and poly(methyl methacrylate) particles and their kinetic behavior in miniemulsion polymerization
Phosphonate-functionalized polymer nanoparticles were synthesized by free-radical copolymerization of vinylphosphonic acid (VPA) with styrene or methyl methacrylate (MMA) using the miniemulsion technique. The influence of different parameters such as monomer and surfactant type, amount of vinylphosphonic acid on the average particle size, and size distribution was studied using dynamic light scattering and transmission electron microscopy. Depending on the amount and type of the surfactant used (ionic or non-ionic), phosphonate-functionalized particles in a size range from 102 to 312 nm can be obtained. The density of the phosphonate groups on the particle surface was higher in the case of using MMA as a basis monomer than polystyrene. The kinetic behavior of VPA copolymerization with styrene or MMA using a hydrophobic initiator was investigated by reaction calorimetry. Different kinetic curves were observed for miniemulsion (co)polymerization of styrene- and MMA-based nanoparticles indicating different nucleation mechanisms.
- 29 May 2009
- Published by Wiley in Macromolecular Chemistry and Physics
- Vol. 210 (11) , 961-970
Fluorescent Superparamagnetic Polylactide Nanoparticles by Combination of Miniemulsion and Emulsion/Solvent Evaporation Techniques
Biodegradable and fluorescent polylactide nanospheres loaded with iron oxide particles of different sizes (either 10 or 25 nm) were prepared by the combination of miniemulsion and emulsion/solvent evaporation techniques. Dynamic light scattering (DLS) and transmission electron microscopy (TEM) studies indicate that the obtained particles have uniform and spherical shape with an average size between 80–120 nm. The size of the particles mainly depends on the molecular weight of the used polylactide. The iron oxide content and the encapsulation homogeneity were determined from the thermogravimetric analysis and preparative ultracentrifugation, respectively. The obtained particles displayed superparamagnetic properties. Additional incorporation of the hydrophobic fluorescent dye gives the possibility to employ the obtained composite particles as model markers in order to study, for example, cellular uptake mechanism. magnified image
- 29 May 2009
- Published by Wiley in Macromolecular Chemistry and Physics
- Vol. 210 (11) , 961-970
Fluorescent Superparamagnetic Polylactide Nanoparticles by Combination of Miniemulsion and Emulsion/Solvent Evaporation Techniques
Biodegradable and fluorescent polylactide nanospheres loaded with iron oxide particles of different sizes (either 10 or 25 nm) were prepared by the combination of miniemulsion and emulsion/solvent evaporation techniques. Dynamic light scattering (DLS) and transmission electron microscopy (TEM) studies indicate that the obtained particles have uniform and spherical shape with an average size between 80–120 nm. The size of the particles mainly depends on the molecular weight of the used polylactide. The iron oxide content and the encapsulation homogeneity were determined from the thermogravimetric analysis and preparative ultracentrifugation, respectively. The obtained particles displayed superparamagnetic properties. Additional incorporation of the hydrophobic fluorescent dye gives the possibility to employ the obtained composite particles as model markers in order to study, for example, cellular uptake mechanism. magnified image