Shangping Xu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Shangping Xu has a total of 27 co-authors. Here are the top co-authors by number of shared publications:
Lucia Feriancikova
Department of Geosciences, University of Wisconsin Milwaukee, Milwaukee, WI 53211, United States of America
6 shared publicationsJacob J. Walczak
Department of Geosciences, University of Wisconsin-Milwaukee, Milwaukee, WI 53201, United States
5 shared publicationsJin Li
Civil & Environmental Engineering Department, University of Wisconsin Milwaukee, Milwaukee, WI 53211, United States of America
4 shared publicationsLixia Wang
Civil & Environmental Engineering Department, University of Wisconsin Milwaukee, Milwaukee, WI 53211, United States of America
4 shared publicationsSonia L. Bardy
Department of Biological Sciences, 3209 N Maryland Ave, University of Wisconsin-Milwaukee, Milwaukee, WI 53211
4 shared publications- Zhaohui Li
Department of Geosciences, University of Wisconsin–Parkside, 900 Wood Road, Kenosha, WI 53144, USA
4 shared publications
Latest Publications
- Open Access
Fermented Organic Fertilizer Promotes ARG Dissemination in Soil Pathogens via Mobile Genetic Elements and Virulence Factors
Mobile genetic elements (MGEs) drive antibiotic resistance gene (ARG) dissemination, but whether mobile genetic elements (MGEs) selectively transfer ARGs and how organic amendment affects MGE-mediated ARG dissemination remain unclear. Using soil from a Shenyang maize field, we established a microcosm experiment combining metagenomic sequencing and qPCR to examine MGE-mediated ARG dynamics under fermented peanut shell amendment. Peanut shell amendment significantly increased potential ARG host abundance and diversity, which closely linked to MGE changes. MGEs showed differential selectivity toward ARGs, likely driven by DNA sequence recognition specificity, linking distinct ARGs to different MGE backbones and shaping host distributions. Organic amendment altered bacterial community structure, activated low-abundance ARG-carrying MGEs, and potentially promoted co-dissemination of tetA and tetX via recently active MGEs. It also shifted the virulence factor profile from flagella-mediated motility toward type IV pili-mediated adhesion, reducing motility while enhancing colonization. High-risk hosts carrying both ARGs and virulence factors increased from 11 strains in the non-amended group to 31 strains in the peanut shell-amended group. Organic amendment may reshape the MGE–ARG co-occurrence pattern and amplify public health risks by promoting ARG and virulence co-dissemination.
Open AccessFermented Organic Fertilizer Promotes ARG Dissemination in Soil Pathogens via Mobile Genetic Elements and Virulence Factors
Mobile genetic elements (MGEs) drive antibiotic resistance gene (ARG) dissemination, but whether mobile genetic elements (MGEs) selectively transfer ARGs and how organic amendment affects MGE-mediated ARG dissemination remain unclear. Using soil from a Shenyang maize field, we established a microcosm experiment combining metagenomic sequencing and qPCR to examine MGE-mediated ARG dynamics under fermented peanut shell amendment. Peanut shell amendment significantly increased potential ARG host abundance and diversity, which closely linked to MGE changes. MGEs showed differential selectivity toward ARGs, likely driven by DNA sequence recognition specificity, linking distinct ARGs to different MGE backbones and shaping host distributions. Organic amendment altered bacterial community structure, activated low-abundance ARG-carrying MGEs, and potentially promoted co-dissemination of tetA and tetX via recently active MGEs. It also shifted the virulence factor profile from flagella-mediated motility toward type IV pili-mediated adhesion, reducing motility while enhancing colonization. High-risk hosts carrying both ARGs and virulence factors increased from 11 strains in the non-amended group to 31 strains in the peanut shell-amended group. Organic amendment may reshape the MGE–ARG co-occurrence pattern and amplify public health risks by promoting ARG and virulence co-dissemination.
- Open Access
Comparison and Contrast of Calcite vs. Dolomite after Heat Treatment to Enhance Toluidine Blue Removal from Water
Significant increase in use of color dyes in modern society exerted a great pressure on environmental and water qualities. As such, studies for the removal of color dyes from water have been conducted extensively. In this study, common Earth materials dolomite and calcite were evaluated and contrasted for their removal of toluidine blue (TB), a cationic dye, before and after heat treatment. An increase by a factor of 3 in TB removal capacity from 3.5 to 10 mmol/kg was achieved after dolomite (Dol) was heated to 800 °C (designated as HDol). In contrast, the TB removal capacity increased by more than 100 times from 2 to 220 mmol/kg after calcite (Cal) was heated to 1000 °C (designated as HCal). For Dol and HDol, the TB removal increased as the solution’s pH increased but decreased with increases in the solution’s ionic strength. For Cal and HCal, the influence of the equilibrium solution’s pH and ionic strength on TB removal was negligible. The free energy of TB sorption on Dol, HDol, and Cal were −7 to −15 kJ/mol. The results suggested different removal mechanism for TB by Dol vs. Cal. X-ray diffraction data for Dol showed a slight increase in calcite content after heat treatment. For Cal, CaO was produced after heating, which converted back to calcite after 24 h of mixing with TB solutions. The significant TB removal by HCal could be attributed to its reaction with CaO. Thus, the best solution is to use freshly treated Cal for the removal of TB from solution.
Open AccessComparison and Contrast of Calcite vs. Dolomite after Heat Treatment to Enhance Toluidine Blue Removal from Water
Significant increase in use of color dyes in modern society exerted a great pressure on environmental and water qualities. As such, studies for the removal of color dyes from water have been conducted extensively. In this study, common Earth materials dolomite and calcite were evaluated and contrasted for their removal of toluidine blue (TB), a cationic dye, before and after heat treatment. An increase by a factor of 3 in TB removal capacity from 3.5 to 10 mmol/kg was achieved after dolomite (Dol) was heated to 800 °C (designated as HDol). In contrast, the TB removal capacity increased by more than 100 times from 2 to 220 mmol/kg after calcite (Cal) was heated to 1000 °C (designated as HCal). For Dol and HDol, the TB removal increased as the solution’s pH increased but decreased with increases in the solution’s ionic strength. For Cal and HCal, the influence of the equilibrium solution’s pH and ionic strength on TB removal was negligible. The free energy of TB sorption on Dol, HDol, and Cal were −7 to −15 kJ/mol. The results suggested different removal mechanism for TB by Dol vs. Cal. X-ray diffraction data for Dol showed a slight increase in calcite content after heat treatment. For Cal, CaO was produced after heating, which converted back to calcite after 24 h of mixing with TB solutions. The significant TB removal by HCal could be attributed to its reaction with CaO. Thus, the best solution is to use freshly treated Cal for the removal of TB from solution.
- Open Access
Heat Treatment of Calcite to Enhance Its Removal of Color Dye Alizarin Red S
The use of color dyes in modern society presents a great challenge to the environment. Thus, extensive studies have been conducted in the last 30 years on the removal of color dyes from aqueous solutions such industrial wastewater. In this study, the removal of alizarin red S (ARS), an anionic dye, from solution by raw calcite (Cal) and heat-treated calcite (HCal) was conducted and compared under different physico-chemical conditions. Based on the isotherm study, the ARS removal capacities increased from 167 to 251 mmol/kg after the Cal was heated to 1000 °C for 3 h. The X-ray diffraction analyses showed no difference in the calcite phase between Cal and HCal after ARS sorption. Fourier-transform infrared results also showed no change in the calcite phase after ARS sorption, except a slightly increase in wavenumber from 713 to 727 cm−1 for the OCO bending of HCal at high ARS sorption levels. SEM observations showed about the same particle size and morphology before and after ARS sorption. The TGA data showed the formation of CaO after Cal was heated, and CaO converted back into calcite after being in contact with water or ARS solution for 24 h and then being air-dried. Thus, the high ARS removal could be due to CaO produced after Cal being heated. The findings from this research proved that there is great potential in the use of calcite, a low-cost and readily available Earth material, after heat treatment for the removal of contaminants from water.
Open AccessHeat Treatment of Calcite to Enhance Its Removal of Color Dye Alizarin Red S
The use of color dyes in modern society presents a great challenge to the environment. Thus, extensive studies have been conducted in the last 30 years on the removal of color dyes from aqueous solutions such industrial wastewater. In this study, the removal of alizarin red S (ARS), an anionic dye, from solution by raw calcite (Cal) and heat-treated calcite (HCal) was conducted and compared under different physico-chemical conditions. Based on the isotherm study, the ARS removal capacities increased from 167 to 251 mmol/kg after the Cal was heated to 1000 °C for 3 h. The X-ray diffraction analyses showed no difference in the calcite phase between Cal and HCal after ARS sorption. Fourier-transform infrared results also showed no change in the calcite phase after ARS sorption, except a slightly increase in wavenumber from 713 to 727 cm−1 for the OCO bending of HCal at high ARS sorption levels. SEM observations showed about the same particle size and morphology before and after ARS sorption. The TGA data showed the formation of CaO after Cal was heated, and CaO converted back into calcite after being in contact with water or ARS solution for 24 h and then being air-dried. Thus, the high ARS removal could be due to CaO produced after Cal being heated. The findings from this research proved that there is great potential in the use of calcite, a low-cost and readily available Earth material, after heat treatment for the removal of contaminants from water.
- Open Access
- 9 April 2024
- Published by MDPI AG in Environments
- Vol. 11 (4) , 75
The Dynamics of the Concentration and Speciation of Arsenic in Private Drinking Water Wells in Eastern Wisconsin, USA
About 2.5 billion people rely on groundwater as their main drinking water source, and arsenic pollution within the groundwater system can cause serious short- and long-term health issues. Within the natural environment, arsenic generally exists as oxyanions which have two oxidation states, As(III) and As(V). Under ambient pH conditions, As(V) is primarily present as an anion (i.e., H2AsO4−) while As(III) tends to be uncharged (i.e., H3AsO3), making it much more difficult to remove As(III) through existing treatment techniques such as adsorption and reverse osmosis (RO). In Eastern Wisconsin, the dolomite and dolomite/sandstone aquifers represent a major drinking water source and high arsenic concentrations have been observed. Previous studies showed that arsenic can be released into private drinking water wells due to the oxidation of sulfide-bearing minerals with arsenic impurities that are usually dispersed within the dolomite and sandstone bedrock. However, there is a lack of information on the concentrations of each arsenic species as well as arsenic dynamics during water pumping/usage. The primary goals of this research were (1) to quantify the baseline concentrations of each arsenic species within selected Eastern Wisconsin private drinking water wells, and (2) to determine how the arsenic concentrations and species could be affected by continuous water usage. Our results showed that As(III) was the dominant species of arsenic, and during continuous water usage, there could be an upward trend in arsenic concentration (there was minimal change in arsenic speciation). Upon the completion of water pumping, arsenic concentrations decreased over time and returned to pre-pumping levels. Our findings highlighted the importance of quantifying the speciation and dynamics of arsenic during water use to the assessment of public health risks and the design of appropriate water treatment techniques.
- 9 April 2024
- Published by MDPI AG in Environments
- Vol. 11 (4) , 75
Open AccessThe Dynamics of the Concentration and Speciation of Arsenic in Private Drinking Water Wells in Eastern Wisconsin, USA
About 2.5 billion people rely on groundwater as their main drinking water source, and arsenic pollution within the groundwater system can cause serious short- and long-term health issues. Within the natural environment, arsenic generally exists as oxyanions which have two oxidation states, As(III) and As(V). Under ambient pH conditions, As(V) is primarily present as an anion (i.e., H2AsO4−) while As(III) tends to be uncharged (i.e., H3AsO3), making it much more difficult to remove As(III) through existing treatment techniques such as adsorption and reverse osmosis (RO). In Eastern Wisconsin, the dolomite and dolomite/sandstone aquifers represent a major drinking water source and high arsenic concentrations have been observed. Previous studies showed that arsenic can be released into private drinking water wells due to the oxidation of sulfide-bearing minerals with arsenic impurities that are usually dispersed within the dolomite and sandstone bedrock. However, there is a lack of information on the concentrations of each arsenic species as well as arsenic dynamics during water pumping/usage. The primary goals of this research were (1) to quantify the baseline concentrations of each arsenic species within selected Eastern Wisconsin private drinking water wells, and (2) to determine how the arsenic concentrations and species could be affected by continuous water usage. Our results showed that As(III) was the dominant species of arsenic, and during continuous water usage, there could be an upward trend in arsenic concentration (there was minimal change in arsenic speciation). Upon the completion of water pumping, arsenic concentrations decreased over time and returned to pre-pumping levels. Our findings highlighted the importance of quantifying the speciation and dynamics of arsenic during water use to the assessment of public health risks and the design of appropriate water treatment techniques.
- Open Access
Anionic Dye Alizarin Red S Removal Using Heat-Treated Dolomite
In modern society, frequent use of synthetic materials in the household and industry presents a great challenge to environmental and water quality. As such, numerous types of research have been conducted for potential removal of emerging contaminants from water using advanced materials. Earth materials, due to their low costs and vast reserves, have also been evaluated in great details for contaminant removal. In this study, a naturally occurring carbonate mineral dolomite (Dol) was assessed for the removal of an anionic dye alizarin red S (ARS) from aqueous solution before and after heat treatment to increase its performance. The ARS-removal capacities increased from 80 to 130 mmol/kg after heat treatment based on the isotherm study. And the ARS-removal efficiency rose by a factor of four as the partitioning coefficient increased from 1.5 to 6 L/mmol after heat treatment. The X-ray diffraction (XRD) analyses showed minute conversion of dolomite into calcite after samples being heated at 800 °C for 3 h. However, there were no phase changes for ARS before and after its sorption. Fourie transform infra-red (FTIR) results also showed a minute appearance of calcite after heating. Thus, the increase in ARS sorption could be due to surface reactivation of Dol after heating or due to formation of a minute amount of amorphous MgO in the system as a result of the conversion of Dol to calcite. The results from this study will add new perspectives to the utilization of Earth materials for environmental application.
Open AccessAnionic Dye Alizarin Red S Removal Using Heat-Treated Dolomite
In modern society, frequent use of synthetic materials in the household and industry presents a great challenge to environmental and water quality. As such, numerous types of research have been conducted for potential removal of emerging contaminants from water using advanced materials. Earth materials, due to their low costs and vast reserves, have also been evaluated in great details for contaminant removal. In this study, a naturally occurring carbonate mineral dolomite (Dol) was assessed for the removal of an anionic dye alizarin red S (ARS) from aqueous solution before and after heat treatment to increase its performance. The ARS-removal capacities increased from 80 to 130 mmol/kg after heat treatment based on the isotherm study. And the ARS-removal efficiency rose by a factor of four as the partitioning coefficient increased from 1.5 to 6 L/mmol after heat treatment. The X-ray diffraction (XRD) analyses showed minute conversion of dolomite into calcite after samples being heated at 800 °C for 3 h. However, there were no phase changes for ARS before and after its sorption. Fourie transform infra-red (FTIR) results also showed a minute appearance of calcite after heating. Thus, the increase in ARS sorption could be due to surface reactivation of Dol after heating or due to formation of a minute amount of amorphous MgO in the system as a result of the conversion of Dol to calcite. The results from this study will add new perspectives to the utilization of Earth materials for environmental application.
- Open Access
Sorption of Alizarin Red S and Methylene Blue on Halloysite from Single and Mixed Solutions
The extensive use of synthetic materials in modern society presents a great challenge to environmental and water quality. As such, numerous studies were dedicated to the removal of emerging contaminants from water using novel materials as sorbents or catalysts. With large reserves and low material costs, Earth material has also attracted great attention for contaminant removal. Halloysite is a 1:1 layered clay mineral with moderate cation exchange capacity that can be used for the removal of cationic contaminants. On the other hand, as it may bear positive charges on the aluminum hydroxyl sheets, it could be used to remove anionic contaminants. In this study, the removal of a cationic dye, methylene blue (MB), and an anionic dye, alizarin red S (ARS), from the water was evaluated from single and mixed solutions. The results suggested that from single solutions, MB removal was via cation exchange while ARS removal could have originated from anion exchange. From mixed solutions, their removal was mutually increased, which may be due to a synergistic effect in the presence of a type of charged dyes serving as counterions to enhance the sorption of dyes of opposite charges. This finding suggests that halloysite may serve as a sorbent for the removal of organic contaminants of different charges at the same time, which is a new perspective that needs further evaluation and expansion.
Open AccessSorption of Alizarin Red S and Methylene Blue on Halloysite from Single and Mixed Solutions
The extensive use of synthetic materials in modern society presents a great challenge to environmental and water quality. As such, numerous studies were dedicated to the removal of emerging contaminants from water using novel materials as sorbents or catalysts. With large reserves and low material costs, Earth material has also attracted great attention for contaminant removal. Halloysite is a 1:1 layered clay mineral with moderate cation exchange capacity that can be used for the removal of cationic contaminants. On the other hand, as it may bear positive charges on the aluminum hydroxyl sheets, it could be used to remove anionic contaminants. In this study, the removal of a cationic dye, methylene blue (MB), and an anionic dye, alizarin red S (ARS), from the water was evaluated from single and mixed solutions. The results suggested that from single solutions, MB removal was via cation exchange while ARS removal could have originated from anion exchange. From mixed solutions, their removal was mutually increased, which may be due to a synergistic effect in the presence of a type of charged dyes serving as counterions to enhance the sorption of dyes of opposite charges. This finding suggests that halloysite may serve as a sorbent for the removal of organic contaminants of different charges at the same time, which is a new perspective that needs further evaluation and expansion.
- Open Access
- 22 May 2019
- Published by Springer Nature in Scientific Reports
- Vol. 9 (1) , 1-12
Removal of Arsenate and Chromate by Lanthanum-modified Granular Ceramic Material: The Critical Role of Coating Temperature
The development of economical, low-maintenance, environmentally friendly and effective water filtration techniques can have far-reaching public health, social and economic benefits. In this research, a cost-effective La-modified granular ceramic material made of red art clay and recycled paper fiber was developed for the removal of two major anionic contaminants, As(V) (arsenate) and Cr(VI) (chromate). La modification temperature significantly impacted the resulting composition and properties of the adsorbents, and thus played a crucial role in the adsorbent performance. The La-modified ceramic materials were extensively characterized through scanning electron microscopy (SEM), Brunauer–Emmett–Teller (BET) surface area measurement, thermal gravimetric analysis (TGA), zeta potential measurements, and Fourier-transform infrared spectroscopy (FTIR) analysis. The characterization results suggested that surface coating by LaONO3-related compounds was critical for As(V) and Cr(VI) adsorption. At the modification temperature of 385 °C, the adsorption of As(V) and Cr(VI) reached maximum, which were 23 mg/g and 13 mg/g, respectively, under circumneutral conditions that are relevant to various aquatic systems. The adsorption kinetics and isotherm, the influence of pH, ionic strength and coexisting anions on As(V) and Cr(VI) adsorption were investigated to further understand both As(V) and Cr(VI) adsorption behavior. Findings from this research showed that La-modified ceramic material made of recycled paper waste represents a cost-effective adsorbent for anionic contaminant removal under environmentally relevant conditions.
- 22 May 2019
- Published by Springer Nature in Scientific Reports
- Vol. 9 (1) , 1-12
Open AccessRemoval of Arsenate and Chromate by Lanthanum-modified Granular Ceramic Material: The Critical Role of Coating Temperature
The development of economical, low-maintenance, environmentally friendly and effective water filtration techniques can have far-reaching public health, social and economic benefits. In this research, a cost-effective La-modified granular ceramic material made of red art clay and recycled paper fiber was developed for the removal of two major anionic contaminants, As(V) (arsenate) and Cr(VI) (chromate). La modification temperature significantly impacted the resulting composition and properties of the adsorbents, and thus played a crucial role in the adsorbent performance. The La-modified ceramic materials were extensively characterized through scanning electron microscopy (SEM), Brunauer–Emmett–Teller (BET) surface area measurement, thermal gravimetric analysis (TGA), zeta potential measurements, and Fourier-transform infrared spectroscopy (FTIR) analysis. The characterization results suggested that surface coating by LaONO3-related compounds was critical for As(V) and Cr(VI) adsorption. At the modification temperature of 385 °C, the adsorption of As(V) and Cr(VI) reached maximum, which were 23 mg/g and 13 mg/g, respectively, under circumneutral conditions that are relevant to various aquatic systems. The adsorption kinetics and isotherm, the influence of pH, ionic strength and coexisting anions on As(V) and Cr(VI) adsorption were investigated to further understand both As(V) and Cr(VI) adsorption behavior. Findings from this research showed that La-modified ceramic material made of recycled paper waste represents a cost-effective adsorbent for anionic contaminant removal under environmentally relevant conditions.
- 1 November 2014
- Published by Elsevier in Colloids and Surfaces B: Biointerfaces
- Vol. 123, 439-445
Comparison of the transport of Bacteroides fragilis and Escherichia coli within saturated sand packs
- 1 November 2014
- Published by Elsevier in Colloids and Surfaces B: Biointerfaces
- Vol. 123, 439-445
Comparison of the transport of Bacteroides fragilis and Escherichia coli within saturated sand packs
- 16 May 2013
- Published by American Chemical Society (ACS) in Environmental Science & Technology
- Vol. 47 (11) , 5720-5728
Effects of Outer Membrane Protein TolC on the Transport of Escherichia coli within Saturated Quartz Sands
The outer membrane protein (OMP) TolC is the cell surface component of several drug efflux pumps that are responsible for bacterial resistance against a variety of antibiotics. In this research, we investigated the effects of OMP TolC on E. coli transport within saturated sands through column experiments using a wild-type E. coli K12 strain (with OMP TolC), as well as the corresponding transposon mutant (tolC::kan) and the markerless deletion mutant (ΔtolC). Our results showed OMP TolC could significantly enhance the transport of E. coli when the ionic strength was 20 mM NaCl or higher. The deposition rate coefficients for the wild-type E. coli strain (with OMP TolC) was usually >50% lower than those of the tolC-negative mutants. The measurements of contact angles using three probe liquids suggested that TolC altered the surface tension components of E. coli cells and lead to lower Hamaker constants for the cell–water–sand system. The interaction energy calculations using the extended Derjaguin–Landau–Verwey–Overbeek (XDLVO) theory suggested that the deposition of the E. coli cell primarily occurred at the secondary energy minimum. The depth of the secondary energy minimum increased with ionic strength, and was greater for the TolC-deletion strains under high ionic strength conditions. Overall, the transport behavior of three E. coli strains within saturated sands could be explained by the XDLVO calculations. Results from this research suggested that antibiotic resistant bacteria expressing OMP TolC could spread more widely within sandy aquifers.
- 16 May 2013
- Published by American Chemical Society (ACS) in Environmental Science & Technology
- Vol. 47 (11) , 5720-5728
Effects of Outer Membrane Protein TolC on the Transport of Escherichia coli within Saturated Quartz Sands
The outer membrane protein (OMP) TolC is the cell surface component of several drug efflux pumps that are responsible for bacterial resistance against a variety of antibiotics. In this research, we investigated the effects of OMP TolC on E. coli transport within saturated sands through column experiments using a wild-type E. coli K12 strain (with OMP TolC), as well as the corresponding transposon mutant (tolC::kan) and the markerless deletion mutant (ΔtolC). Our results showed OMP TolC could significantly enhance the transport of E. coli when the ionic strength was 20 mM NaCl or higher. The deposition rate coefficients for the wild-type E. coli strain (with OMP TolC) was usually >50% lower than those of the tolC-negative mutants. The measurements of contact angles using three probe liquids suggested that TolC altered the surface tension components of E. coli cells and lead to lower Hamaker constants for the cell–water–sand system. The interaction energy calculations using the extended Derjaguin–Landau–Verwey–Overbeek (XDLVO) theory suggested that the deposition of the E. coli cell primarily occurred at the secondary energy minimum. The depth of the secondary energy minimum increased with ionic strength, and was greater for the TolC-deletion strains under high ionic strength conditions. Overall, the transport behavior of three E. coli strains within saturated sands could be explained by the XDLVO calculations. Results from this research suggested that antibiotic resistant bacteria expressing OMP TolC could spread more widely within sandy aquifers.
- 1 February 2012
- Published by Elsevier in Colloids and Surfaces B: Biointerfaces
- Vol. 90, 129-136
The effects of starvation on the transport of Escherichia coli in saturated porous media are dependent on pH and ionic strength
- 1 February 2012
- Published by Elsevier in Colloids and Surfaces B: Biointerfaces
- Vol. 90, 129-136
The effects of starvation on the transport of Escherichia coli in saturated porous media are dependent on pH and ionic strength