Christopher R Calladine
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Christopher R Calladine has a total of 12 co-authors. Here are the top co-authors by number of shared publications:
Andrew Sharff
1 shared publicationB. F. Luisi
Department of Biochemistry, University of Cambridge, 80 Tennis Court Road, Cambridge CB2 1GA, UK
1 shared publicationBen F. Luisi
Department of Biochemistry, University of Cambridge, CB2 1GA, United Kingdom
1 shared publication- Ben F. Luisi
Department of Biochemistry; University of Cambridge; Cambridge, UK
1 shared publication Ben Luisi
1 shared publication- Charles Anthony Laughton
School of Pharmacy and Centre for Biomolecular Sciences, University of Nottingham, Nottingham, UK
1 shared publication
Latest Publications
- Open Access
- 16 June 2021
- Published by The Royal Society in Biographical Memoirs of Fellows of the Royal Society
- Vol. 71, 335-359
Eric Harold Mansfield. 24 May 1923—20 October 2016
Eric Mansfield was a structural engineer who worked at the Royal Aircraft Establishment Farnborough from 1943 to 1983 on a wide range of problems in the field of aircraft structures. His main working tool was the mathematical theory of elasticity, which he deployed with skill, ingenuity, perseverance and imagination to investigate many problems related to the design of aircraft structures during a period of development of higher flight performance and new materials. His studies included aircraft wings and fuselages, particularly in the presence of cut-outs and openings—for which he invented the ‘neutral hole’ concept—and problems involving large-deflection structural behaviour of plates, including thermal effects such as flexural and torsional buckling of fins and wings heated in supersonic flight. He also developed the novel and powerful tension field theory for understanding the post-buckling behaviour of thin webs in shear, and the analogous inextensional bending theory of thin wings. His mathematical models were confirmed by elegant experiments. Mansfield's book The bending and stretching of plates contains clear descriptions of many of his research investigations; it has become a classic text. All of Mansfield's writing is incisive and clear. He was widely regarded as a seminal figure in the field of applied structural mechanics in the second half of the twentieth century.
- 16 June 2021
- Published by The Royal Society in Biographical Memoirs of Fellows of the Royal Society
- Vol. 71, 335-359
Open AccessEric Harold Mansfield. 24 May 1923—20 October 2016
Eric Mansfield was a structural engineer who worked at the Royal Aircraft Establishment Farnborough from 1943 to 1983 on a wide range of problems in the field of aircraft structures. His main working tool was the mathematical theory of elasticity, which he deployed with skill, ingenuity, perseverance and imagination to investigate many problems related to the design of aircraft structures during a period of development of higher flight performance and new materials. His studies included aircraft wings and fuselages, particularly in the presence of cut-outs and openings—for which he invented the ‘neutral hole’ concept—and problems involving large-deflection structural behaviour of plates, including thermal effects such as flexural and torsional buckling of fins and wings heated in supersonic flight. He also developed the novel and powerful tension field theory for understanding the post-buckling behaviour of thin webs in shear, and the analogous inextensional bending theory of thin wings. His mathematical models were confirmed by elegant experiments. Mansfield's book The bending and stretching of plates contains clear descriptions of many of his research investigations; it has become a classic text. All of Mansfield's writing is incisive and clear. He was widely regarded as a seminal figure in the field of applied structural mechanics in the second half of the twentieth century.
- 27 February 2018
- Published by SAGE Publications in Advances in Structural Engineering
- Vol. 21 (16) , 2393-2403
Shell buckling, without ‘imperfections’
The buckling behaviour of thin shell structures under load has been a persistent challenge to engineering designers and researchers over many decades. In this article I consider two unusual experimental studies on the buckling of thin-walled elastic cylindrical shells, each of which sheds intriguing light on the buckling phenomena. The classical theory of buckling of thin cylindrical shells under axial compression predicts that the buckling stress will be proportional to t/ R– the ratio of thickness to radius – other things being equal. But collected results of experimental studies from many laboratories, when plotted on log–log scales, show clearly that the buckling stress is actually proportional to ( t/ R) 1.5 , with the measured buckling stresses being scattered through a factor of about 4 for shells with R/ t > 200. Such scatter is commonly judged to be in accord with Koiter’s theory of ‘imperfection sensitivity’. But that theory lays no claim to an understanding of the empirical 1.5-power law. I claim that a key to this situation is the experimental performance of some small-scale open-topped silicone rubber shells, buckling under their own weight, which clearly demonstrates a 1.5-power law, but with very little scatter. The buckling mode of these shells involves almost entirely inextensional deformation, with a single small dimple growing near the base, separated from the rest of the shell by a narrow boundary layer that accounts for almost all of the dimple’s elastic strain energy. A straightforward, simple analysis of the mechanics of the dimple is consistent with the experimental 1.5-power law. As noted above, experimental buckling loads of shells that are closed at both ends also show the empirical 1.5-power law, but now with significant statistical scatter. A second aim of the paper is to throw light on that phenomenon. I venture to attribute it to the effect of the boundary conditions of the shell. I adduce support for this view from experimental observations on the buckling of a shell with special, frictional end-fittings. That feature produces significantly higher collapse loads, and with much smaller scatter, than for corresponding shells with fixed boundaries; and it permits striking pre-buckled deformations to occur, of a kind not previously noted. It will be appreciated that neither of the two parts of this article depends on the widely accepted theory of imperfection-sensitivity; hence my choice of title. It is a pleasure for me to submit this article to a special publication in honour of Michael Rotter, with whom I have discussed matters of this sort through three decades.
- 27 February 2018
- Published by SAGE Publications in Advances in Structural Engineering
- Vol. 21 (16) , 2393-2403
Shell buckling, without ‘imperfections’
The buckling behaviour of thin shell structures under load has been a persistent challenge to engineering designers and researchers over many decades. In this article I consider two unusual experimental studies on the buckling of thin-walled elastic cylindrical shells, each of which sheds intriguing light on the buckling phenomena. The classical theory of buckling of thin cylindrical shells under axial compression predicts that the buckling stress will be proportional to t/ R– the ratio of thickness to radius – other things being equal. But collected results of experimental studies from many laboratories, when plotted on log–log scales, show clearly that the buckling stress is actually proportional to ( t/ R) 1.5 , with the measured buckling stresses being scattered through a factor of about 4 for shells with R/ t > 200. Such scatter is commonly judged to be in accord with Koiter’s theory of ‘imperfection sensitivity’. But that theory lays no claim to an understanding of the empirical 1.5-power law. I claim that a key to this situation is the experimental performance of some small-scale open-topped silicone rubber shells, buckling under their own weight, which clearly demonstrates a 1.5-power law, but with very little scatter. The buckling mode of these shells involves almost entirely inextensional deformation, with a single small dimple growing near the base, separated from the rest of the shell by a narrow boundary layer that accounts for almost all of the dimple’s elastic strain energy. A straightforward, simple analysis of the mechanics of the dimple is consistent with the experimental 1.5-power law. As noted above, experimental buckling loads of shells that are closed at both ends also show the empirical 1.5-power law, but now with significant statistical scatter. A second aim of the paper is to throw light on that phenomenon. I venture to attribute it to the effect of the boundary conditions of the shell. I adduce support for this view from experimental observations on the buckling of a shell with special, frictional end-fittings. That feature produces significantly higher collapse loads, and with much smaller scatter, than for corresponding shells with fixed boundaries; and it permits striking pre-buckled deformations to occur, of a kind not previously noted. It will be appreciated that neither of the two parts of this article depends on the widely accepted theory of imperfection-sensitivity; hence my choice of title. It is a pleasure for me to submit this article to a special publication in honour of Michael Rotter, with whom I have discussed matters of this sort through three decades.
- 28 June 2013
- Published by The Royal Society in Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences
- Vol. 371 (1993) , 20120369
Geometric principles in the assembly of α-helical bundles
α-Helical coiled coils are usually stabilized by hydrophobic interfaces between the two constituent α-helices, in the form of ‘knobs-into-holes’ packing of non-polar residues arranged in repeating heptad patterns. Here we examine the corresponding ‘hydrophobic cores’ that stabilize bundles of four α-helices. In particular, we study three different kinds of bundle, involving four α-helices of identical sequence: two pack in a parallel and one in an anti-parallel orientation. We point out that the simplest way of understanding the packing of these 4-helix bundles is to use Crick's original idea that the helices are held together by ‘hydrophobic stripes’, which are readily visualized on the cylindrical surface lattice of the α-helices; and that the ‘helix-crossing angle’—which determines, in particular, whether supercoiling is left- or right-handed—is fixed by the slope of the lattice lines that contain the hydrophobic residues. In our three examples the constituent α-helices have hydrophobic repeat patterns of 7, 11 and 4 residues, respectively; and we associate the different overall conformations with ‘knobs-into-holes’ packing along the 7-, 11- and 4-start lines, respectively, of the cylindrical surface lattices of the constituent α-helices. For the first two examples, all four interfaces between adjacent helices are geometrically equivalent; but in the third, one of the four interfaces differs significantly from the others. We provide a geometrical explanation for this non-equivalence in terms of two different but equivalent ways of assembling this bundle, which may possibly constitute a bistable molecular ‘switch’ with a coaxial throw of about 12 Å. The geometrical ideas that we deploy in this paper provide the simplest and clearest description of the structure of helical bundles. In an appendix, we describe briefly a computer program that we have devised in order to search for ‘knobs-into-holes’ packing between α-helices in proteins.
- 28 June 2013
- Published by The Royal Society in Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences
- Vol. 371 (1993) , 20120369
Geometric principles in the assembly of α-helical bundles
α-Helical coiled coils are usually stabilized by hydrophobic interfaces between the two constituent α-helices, in the form of ‘knobs-into-holes’ packing of non-polar residues arranged in repeating heptad patterns. Here we examine the corresponding ‘hydrophobic cores’ that stabilize bundles of four α-helices. In particular, we study three different kinds of bundle, involving four α-helices of identical sequence: two pack in a parallel and one in an anti-parallel orientation. We point out that the simplest way of understanding the packing of these 4-helix bundles is to use Crick's original idea that the helices are held together by ‘hydrophobic stripes’, which are readily visualized on the cylindrical surface lattice of the α-helices; and that the ‘helix-crossing angle’—which determines, in particular, whether supercoiling is left- or right-handed—is fixed by the slope of the lattice lines that contain the hydrophobic residues. In our three examples the constituent α-helices have hydrophobic repeat patterns of 7, 11 and 4 residues, respectively; and we associate the different overall conformations with ‘knobs-into-holes’ packing along the 7-, 11- and 4-start lines, respectively, of the cylindrical surface lattices of the constituent α-helices. For the first two examples, all four interfaces between adjacent helices are geometrically equivalent; but in the third, one of the four interfaces differs significantly from the others. We provide a geometrical explanation for this non-equivalence in terms of two different but equivalent ways of assembling this bundle, which may possibly constitute a bistable molecular ‘switch’ with a coaxial throw of about 12 Å. The geometrical ideas that we deploy in this paper provide the simplest and clearest description of the structure of helical bundles. In an appendix, we describe briefly a computer program that we have devised in order to search for ‘knobs-into-holes’ packing between α-helices in proteins.
- Open Access
- 1 March 2013
- Published by Elsevier in Journal of Molecular Biology
- Vol. 425 (5) , 914-928
A “Mechanistic” Explanation of the Multiple Helical Forms Adopted by Bacterial Flagellar Filaments
- 1 March 2013
- Published by Elsevier in Journal of Molecular Biology
- Vol. 425 (5) , 914-928
Open AccessA “Mechanistic” Explanation of the Multiple Helical Forms Adopted by Bacterial Flagellar Filaments
- 24 July 2007
- Published by Wiley in Proteins: Structure, Function, and Bioinformatics
- Vol. 70 (1) , 25-30
A potential molecular switch in an α‐helical coiled coil
The yeast DNA‐binding protein GCN4 forms a homo‐dimer through a self‐complementary coiled‐coil interface. In this article, we describe how such coiled‐coils might be bistable and, through Molecular Dynamics computations on the GCN4 coiled coil, we show that the coiled coil can indeed switch between the two states by a pathway in which there is a progressive “flipping” of consecutive steps along the interface. We discuss the general implications of potentially bistable coiled‐coil interfaces for allosteric signal‐transmission mechanisms along homo‐dimeric coiled coils and for the packing of helices in globular proteins. Proteins 2008.
- 24 July 2007
- Published by Wiley in Proteins: Structure, Function, and Bioinformatics
- Vol. 70 (1) , 25-30
A potential molecular switch in an α‐helical coiled coil
The yeast DNA‐binding protein GCN4 forms a homo‐dimer through a self‐complementary coiled‐coil interface. In this article, we describe how such coiled‐coils might be bistable and, through Molecular Dynamics computations on the GCN4 coiled coil, we show that the coiled coil can indeed switch between the two states by a pathway in which there is a progressive “flipping” of consecutive steps along the interface. We discuss the general implications of potentially bistable coiled‐coil interfaces for allosteric signal‐transmission mechanisms along homo‐dimeric coiled coils and for the packing of helices in globular proteins. Proteins 2008.
- 31 August 2002
- Published by Elsevier in International Journal of Mechanical Sciences
- Vol. 44 (8) , 1583-1601
Buckling of thin cylindrical shells: an attempt to resolve a paradox
- 31 August 2002
- Published by Elsevier in International Journal of Mechanical Sciences
- Vol. 44 (8) , 1583-1601
Buckling of thin cylindrical shells: an attempt to resolve a paradox
- 1 January 2002
- Published by Springer Nature
- p. 1-10
Some Thoughts on Research
- 1 January 2001
- Published by Elsevier in Journal of Molecular Biology
- Vol. 305 (3) , 603-618
How to untwist an α-helix: structural principles of an α-helical barrel11Edited by J. Thornton
- 1 January 2001
- Published by Elsevier in Journal of Molecular Biology
- Vol. 305 (3) , 603-618
How to untwist an α-helix: structural principles of an α-helical barrel11Edited by J. Thornton
- 1 September 1998
- Published by Elsevier in Journal of Molecular Biology
- Vol. 282 (2) , 331-343
Two distinct modes of protein-induced bending in DNA 1 1Edited by J. Karn
- 1 September 1998
- Published by Elsevier in Journal of Molecular Biology
- Vol. 282 (2) , 331-343
Two distinct modes of protein-induced bending in DNA 1 1Edited by J. Karn