Richard M. Parton
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Richard M. Parton has a total of 97 co-authors. Here are the top co-authors by number of shared publications:
- Ilan Davis
Department of Biochemistry, University of Oxford
15 shared publications - Ian M. Dobbie
Micron Advanced Bioimaging Unit, Department of Biochemistry, University of Oxford
9 shared publications - Martin J. Booth
University of Oxford
8 shared publications - David Miguel Susano Pinto
University of Oxford
6 shared publications - Matthew Wincott
Department of Engineering Science, University of Oxford, Oxford, OX1 3PJ, UK
4 shared publications - Mick Phillips
Department of Biochemistry, University of Oxford
4 shared publications
Latest Publications
- Open Access
- 5 May 2023
- Published by Rockefeller University Press in Journal of Cell Biology
- Vol. 222 (6)
Systematic analysis of YFP traps reveals common mRNA/protein discordance in neural tissues
While post-transcriptional control is thought to be required at the periphery of neurons and glia, its extent is unclear. Here, we investigate systematically the spatial distribution and expression of mRNA at single molecule sensitivity and their corresponding proteins of 200 YFP trap lines across the intact Drosophila nervous system. 97.5% of the genes studied showed discordance between the distribution of mRNA and the proteins they encode in at least one region of the nervous system. These data suggest that post-transcriptional regulation is very common, helping to explain the complexity of the nervous system. We also discovered that 68.5% of these genes have transcripts present at the periphery of neurons, with 9.5% at the glial periphery. Peripheral transcripts include many potential new regulators of neurons, glia, and their interactions. Our approach is applicable to most genes and tissues and includes powerful novel data annotation and visualization tools for post-transcriptional regulation.
- 5 May 2023
- Published by Rockefeller University Press in Journal of Cell Biology
- Vol. 222 (6)
Open AccessSystematic analysis of YFP traps reveals common mRNA/protein discordance in neural tissues
While post-transcriptional control is thought to be required at the periphery of neurons and glia, its extent is unclear. Here, we investigate systematically the spatial distribution and expression of mRNA at single molecule sensitivity and their corresponding proteins of 200 YFP trap lines across the intact Drosophila nervous system. 97.5% of the genes studied showed discordance between the distribution of mRNA and the proteins they encode in at least one region of the nervous system. These data suggest that post-transcriptional regulation is very common, helping to explain the complexity of the nervous system. We also discovered that 68.5% of these genes have transcripts present at the periphery of neurons, with 9.5% at the glial periphery. Peripheral transcripts include many potential new regulators of neurons, glia, and their interactions. Our approach is applicable to most genes and tissues and includes powerful novel data annotation and visualization tools for post-transcriptional regulation.
- Open Access
- 30 March 2022
- Published by F1000 Research Ltd in Wellcome Open Research
- Vol. 6, 63
Democratising “Microscopi”: a 3D printed automated XYZT fluorescence imaging system for teaching, outreach and fieldwork
Commercial fluorescence microscope stands and fully automated XYZt fluorescence imaging systems are generally beyond the limited budgets available for teaching and outreach. We have addressed this problem by developing “Microscopi”, an accessible, affordable, DIY automated imaging system that is built from 3D printed and commodity off-the-shelf hardware, including electro-mechanical, computer and optical components. Our design features automated sample navigation and image capture with a simple web-based graphical user interface, accessible with a tablet or other mobile device. The light path can easily be switched between different imaging modalities. The open source Python-based control software allows the hardware to be driven as an integrated imaging system. Furthermore, the microscope is fully customisable, which also enhances its value as a learning tool. Here, we describe the basic design and demonstrate imaging performance for a range of easily sourced specimens.
- 30 March 2022
- Published by F1000 Research Ltd in Wellcome Open Research
- Vol. 6, 63
Open AccessDemocratising “Microscopi”: a 3D printed automated XYZT fluorescence imaging system for teaching, outreach and fieldwork
Commercial fluorescence microscope stands and fully automated XYZt fluorescence imaging systems are generally beyond the limited budgets available for teaching and outreach. We have addressed this problem by developing “Microscopi”, an accessible, affordable, DIY automated imaging system that is built from 3D printed and commodity off-the-shelf hardware, including electro-mechanical, computer and optical components. Our design features automated sample navigation and image capture with a simple web-based graphical user interface, accessible with a tablet or other mobile device. The light path can easily be switched between different imaging modalities. The open source Python-based control software allows the hardware to be driven as an integrated imaging system. Furthermore, the microscope is fully customisable, which also enhances its value as a learning tool. Here, we describe the basic design and demonstrate imaging performance for a range of easily sourced specimens.
- Open Access
Systematic analysis of YFP gene traps reveals common discordance between mRNA and protein across the nervous system
Summary: While post-transcriptional control is thought to be required at the periphery of neurons and glia, its extent is unclear. Here, we investigate systematically the spatial distribution and expression of mRNA at single molecule sensitivity and their corresponding proteins of 200 YFP trap protein trap lines across the intact Drosophila nervous system. 98% of the genes studied showed discordance between the distribution of mRNA and the proteins they encode in at least one region of the nervous system. These data suggest that post-transcriptional regulation is very common, helping to explain the complexity of the nervous system. We also discovered that 68.5% of these genes have transcripts present at the periphery of neurons, with 9.5% at the glial periphery. Peripheral transcripts include many potential new regulators of neurons, glia and their interactions. Our approach is applicable to most genes and tissues and includes powerful novel data annotation and visualisation tools for post-transcriptional regulation. Brief outline: A novel high resolution and sensitive approach to systematically co-visualise the distribution of mRNAs and proteins in the intact nervous system reveals that post-transcriptional regulation of gene expression is very common. The rich data landscape is provided as a browsable resource ( link ), using Zegami, a cloud-based data exploration platform ( link ). Our solution provides a paradigm for the characterisation of post-transcriptional regulation of most genes and model systems. Highlights: 196/200 (98%) Drosophila genes show discordant RNA and protein expression in at least one nervous system region 137/200 (68.5%) mRNAs are present in at least one synaptic compartment Novel localised mRNA and protein discovered in periphery of glial processes New paradigm for analysis of post-transcriptional regulation and data exploration
Open AccessSystematic analysis of YFP gene traps reveals common discordance between mRNA and protein across the nervous system
Summary: While post-transcriptional control is thought to be required at the periphery of neurons and glia, its extent is unclear. Here, we investigate systematically the spatial distribution and expression of mRNA at single molecule sensitivity and their corresponding proteins of 200 YFP trap protein trap lines across the intact Drosophila nervous system. 98% of the genes studied showed discordance between the distribution of mRNA and the proteins they encode in at least one region of the nervous system. These data suggest that post-transcriptional regulation is very common, helping to explain the complexity of the nervous system. We also discovered that 68.5% of these genes have transcripts present at the periphery of neurons, with 9.5% at the glial periphery. Peripheral transcripts include many potential new regulators of neurons, glia and their interactions. Our approach is applicable to most genes and tissues and includes powerful novel data annotation and visualisation tools for post-transcriptional regulation. Brief outline: A novel high resolution and sensitive approach to systematically co-visualise the distribution of mRNAs and proteins in the intact nervous system reveals that post-transcriptional regulation of gene expression is very common. The rich data landscape is provided as a browsable resource ( link ), using Zegami, a cloud-based data exploration platform ( link ). Our solution provides a paradigm for the characterisation of post-transcriptional regulation of most genes and model systems. Highlights: 196/200 (98%) Drosophila genes show discordant RNA and protein expression in at least one nervous system region 137/200 (68.5%) mRNAs are present in at least one synaptic compartment Novel localised mRNA and protein discovered in periphery of glial processes New paradigm for analysis of post-transcriptional regulation and data exploration
- Open Access
- 20 January 2022
- Published by eLife Sciences Publications, Ltd in eLife
- Vol. 11
Absolute quantitation of individual SARS-CoV-2 RNA molecules provides a new paradigm for infection dynamics and variant differences
Despite an unprecedented global research effort on SARS-CoV-2, early replication events remain poorly understood. Given the clinical importance of emergent viral variants with increased transmission, there is an urgent need to understand the early stages of viral replication and transcription. We used single-molecule fluorescence in situ hybridisation (smFISH) to quantify positive sense RNA genomes with 95% detection efficiency, while simultaneously visualising negative sense genomes, subgenomic RNAs, and viral proteins. Our absolute quantification of viral RNAs and replication factories revealed that SARS-CoV-2 genomic RNA is long-lived after entry, suggesting that it avoids degradation by cellular nucleases. Moreover, we observed that SARS-CoV-2 replication is highly variable between cells, with only a small cell population displaying high burden of viral RNA. Unexpectedly, the B.1.1.7 variant, first identified in the UK, exhibits significantly slower replication kinetics than the Victoria strain, suggesting a novel mechanism contributing to its higher transmissibility with important clinical implications.
- 20 January 2022
- Published by eLife Sciences Publications, Ltd in eLife
- Vol. 11
Open AccessAbsolute quantitation of individual SARS-CoV-2 RNA molecules provides a new paradigm for infection dynamics and variant differences
Despite an unprecedented global research effort on SARS-CoV-2, early replication events remain poorly understood. Given the clinical importance of emergent viral variants with increased transmission, there is an urgent need to understand the early stages of viral replication and transcription. We used single-molecule fluorescence in situ hybridisation (smFISH) to quantify positive sense RNA genomes with 95% detection efficiency, while simultaneously visualising negative sense genomes, subgenomic RNAs, and viral proteins. Our absolute quantification of viral RNAs and replication factories revealed that SARS-CoV-2 genomic RNA is long-lived after entry, suggesting that it avoids degradation by cellular nucleases. Moreover, we observed that SARS-CoV-2 replication is highly variable between cells, with only a small cell population displaying high burden of viral RNA. Unexpectedly, the B.1.1.7 variant, first identified in the UK, exhibits significantly slower replication kinetics than the Victoria strain, suggesting a novel mechanism contributing to its higher transmissibility with important clinical implications.
- Open Access
- 17 January 2022
- Published by F1000 Research Ltd in Wellcome Open Research
- Vol. 6, 76
Microscope-Cockpit: Python-based bespoke microscopy for bio-medical science
We have developed “Microscope-Cockpit” (Cockpit), a highly adaptable open source user-friendly Python-based Graphical User Interface (GUI) environment for precision control of both simple and elaborate bespoke microscope systems. The user environment allows next-generation near instantaneous navigation of the entire slide landscape for efficient selection of specimens of interest and automated acquisition without the use of eyepieces. Cockpit uses “Python-Microscope” (Microscope) for high-performance coordinated control of a wide range of hardware devices using open source software. Microscope also controls complex hardware devices such as deformable mirrors for aberration correction and spatial light modulators for structured illumination via abstracted device models. We demonstrate the advantages of the Cockpit platform using several bespoke microscopes, including a simple widefield system and a complex system with adaptive optics and structured illumination. A key strength of Cockpit is its use of Python, which means that any microscope built with Cockpit is ready for future customisation by simply adding new libraries, for example machine learning algorithms to enable automated microscopy decision making while imaging.
- 17 January 2022
- Published by F1000 Research Ltd in Wellcome Open Research
- Vol. 6, 76
Open AccessMicroscope-Cockpit: Python-based bespoke microscopy for bio-medical science
We have developed “Microscope-Cockpit” (Cockpit), a highly adaptable open source user-friendly Python-based Graphical User Interface (GUI) environment for precision control of both simple and elaborate bespoke microscope systems. The user environment allows next-generation near instantaneous navigation of the entire slide landscape for efficient selection of specimens of interest and automated acquisition without the use of eyepieces. Cockpit uses “Python-Microscope” (Microscope) for high-performance coordinated control of a wide range of hardware devices using open source software. Microscope also controls complex hardware devices such as deformable mirrors for aberration correction and spatial light modulators for structured illumination via abstracted device models. We demonstrate the advantages of the Cockpit platform using several bespoke microscopes, including a simple widefield system and a complex system with adaptive optics and structured illumination. A key strength of Cockpit is its use of Python, which means that any microscope built with Cockpit is ready for future customisation by simply adding new libraries, for example machine learning algorithms to enable automated microscopy decision making while imaging.
- Open Access
- 8 April 2021
- Published by F1000 Research Ltd in Wellcome Open Research
- Vol. 6, 76
Microscope-Cockpit: Python-based bespoke microscopy for bio-medical science
We have developed “Microscope-Cockpit” (Cockpit), a highly adaptable open source user-friendly Python-based Graphical User Interface (GUI) environment for precision control of both simple and elaborate bespoke microscope systems. The user environment allows next-generation near instantaneous navigation of the entire slide landscape for efficient selection of specimens of interest and automated acquisition without the use of eyepieces. Cockpit uses “Python-Microscope” (Microscope) for high-performance coordinated control of a wide range of hardware devices using open source software. Microscope also controls complex hardware devices such as deformable mirrors for aberration correction and spatial light modulators for structured illumination via abstracted device models. We demonstrate the advantages of the Cockpit platform using several bespoke microscopes, including a simple widefield system and a complex system with adaptive optics and structured illumination. A key strength of Cockpit is its use of Python, which means that any microscope built with Cockpit is ready for future customisation by simply adding new libraries, for example machine learning algorithms to enable automated microscopy decision making while imaging.
- 8 April 2021
- Published by F1000 Research Ltd in Wellcome Open Research
- Vol. 6, 76
Open AccessMicroscope-Cockpit: Python-based bespoke microscopy for bio-medical science
We have developed “Microscope-Cockpit” (Cockpit), a highly adaptable open source user-friendly Python-based Graphical User Interface (GUI) environment for precision control of both simple and elaborate bespoke microscope systems. The user environment allows next-generation near instantaneous navigation of the entire slide landscape for efficient selection of specimens of interest and automated acquisition without the use of eyepieces. Cockpit uses “Python-Microscope” (Microscope) for high-performance coordinated control of a wide range of hardware devices using open source software. Microscope also controls complex hardware devices such as deformable mirrors for aberration correction and spatial light modulators for structured illumination via abstracted device models. We demonstrate the advantages of the Cockpit platform using several bespoke microscopes, including a simple widefield system and a complex system with adaptive optics and structured illumination. A key strength of Cockpit is its use of Python, which means that any microscope built with Cockpit is ready for future customisation by simply adding new libraries, for example machine learning algorithms to enable automated microscopy decision making while imaging.
- Open Access
- 22 March 2021
- Published by F1000 Research Ltd in Wellcome Open Research
- Vol. 6, 63
Democratising “Microscopi”: a 3D printed automated XYZT fluorescence imaging system for teaching, outreach and fieldwork
Commercial fluorescence microscope stands and fully automated XYZt fluorescence imaging systems are generally beyond the limited budgets available for teaching and outreach. We have addressed this problem by developing “Microscopi”, an accessible, affordable, DIY automated imaging system that is built from 3D printed and commodity off-the-shelf hardware, including electro-mechanical, computer and optical components. Our design features automated sample navigation and image capture with a simple web-based graphical user interface, accessible with a tablet or other mobile device. The light path can easily be switched between different imaging modalities. The open source Python-based control software allows the hardware to be driven as an integrated imaging system. Furthermore, the microscope is fully customisable, which also enhances its value as a learning tool. Here, we describe the basic design and demonstrate imaging performance for a range of easily sourced specimens.
- 22 March 2021
- Published by F1000 Research Ltd in Wellcome Open Research
- Vol. 6, 63
Open AccessDemocratising “Microscopi”: a 3D printed automated XYZT fluorescence imaging system for teaching, outreach and fieldwork
Commercial fluorescence microscope stands and fully automated XYZt fluorescence imaging systems are generally beyond the limited budgets available for teaching and outreach. We have addressed this problem by developing “Microscopi”, an accessible, affordable, DIY automated imaging system that is built from 3D printed and commodity off-the-shelf hardware, including electro-mechanical, computer and optical components. Our design features automated sample navigation and image capture with a simple web-based graphical user interface, accessible with a tablet or other mobile device. The light path can easily be switched between different imaging modalities. The open source Python-based control software allows the hardware to be driven as an integrated imaging system. Furthermore, the microscope is fully customisable, which also enhances its value as a learning tool. Here, we describe the basic design and demonstrate imaging performance for a range of easily sourced specimens.
- Open Access
Microscope-Cockpit: Python-based bespoke microscopy for bio-medical science
We have developed “Microscope-Cockpit” (Cockpit), a highly adaptable open source user-friendly Python-based GUI environment for precision control of both simple and elaborate bespoke microscope systems. The user environment allows next-generation near-instantaneous navigation of the entire slide landscape for efficient selection of specimens of interest and automated acquisition without the use of eyepieces. Cockpit uses “Python-Microscope” (Microscope) for high-performance coordinated control of a wide range of hardware devices using open source software. Microscope also controls complex hardware devices such as deformable mirrors for aberration correction and spatial light modulators for structured illumination via abstracted device models. We demonstrate the advantages of the Cockpit platform using several bespoke microscopes, including a simple widefield system and a complex system with adaptive optics and structured illumination. A key strength of Cockpit is its use of Python, which means that any microscope built with Cockpit is ready for future customisation by simply adding new libraries, for example machine learning algorithms to enable automated microscopy decision making while imaging. Highlights User-friendly setup and use for simple to complex bespoke microscopes. Facilitates collaborations between biomedical scientists and microscope technologists. Touchscreen for near-instantaneous navigation of specimen landscape. Uses Python-Microscope, for abstracted open source hardware device control. Well-suited for user training of AI-algorithms for automated microscopy.
Open AccessMicroscope-Cockpit: Python-based bespoke microscopy for bio-medical science
We have developed “Microscope-Cockpit” (Cockpit), a highly adaptable open source user-friendly Python-based GUI environment for precision control of both simple and elaborate bespoke microscope systems. The user environment allows next-generation near-instantaneous navigation of the entire slide landscape for efficient selection of specimens of interest and automated acquisition without the use of eyepieces. Cockpit uses “Python-Microscope” (Microscope) for high-performance coordinated control of a wide range of hardware devices using open source software. Microscope also controls complex hardware devices such as deformable mirrors for aberration correction and spatial light modulators for structured illumination via abstracted device models. We demonstrate the advantages of the Cockpit platform using several bespoke microscopes, including a simple widefield system and a complex system with adaptive optics and structured illumination. A key strength of Cockpit is its use of Python, which means that any microscope built with Cockpit is ready for future customisation by simply adding new libraries, for example machine learning algorithms to enable automated microscopy decision making while imaging. Highlights User-friendly setup and use for simple to complex bespoke microscopes. Facilitates collaborations between biomedical scientists and microscope technologists. Touchscreen for near-instantaneous navigation of specimen landscape. Uses Python-Microscope, for abstracted open source hardware device control. Well-suited for user training of AI-algorithms for automated microscopy.
- Open Access
Wavefront-sensorless adaptive optics with a laser-free spinning disk confocal microscope
Adaptive optics is being applied widely to a range of microscopies in order to improve imaging quality in the presence of specimen-induced aberrations. We present here the first implementation of wavefront-sensorless adaptive optics for a laser-free, aperture correlation, spinning disk microscope. This widefield method provides confocal-like optical sectioning through use of a patterned disk in the illumination and detection paths. Like other high-resolution microscopes, its operation is compromised by aberrations due to refractive index mismatch and variations within the specimen. Correction of such aberrations shows improved signal level, contrast and resolution.
Open AccessWavefront-sensorless adaptive optics with a laser-free spinning disk confocal microscope
Adaptive optics is being applied widely to a range of microscopies in order to improve imaging quality in the presence of specimen-induced aberrations. We present here the first implementation of wavefront-sensorless adaptive optics for a laser-free, aperture correlation, spinning disk microscope. This widefield method provides confocal-like optical sectioning through use of a patterned disk in the illumination and detection paths. Like other high-resolution microscopes, its operation is compromised by aberrations due to refractive index mismatch and variations within the specimen. Correction of such aberrations shows improved signal level, contrast and resolution.
- Open Access
Democratising “Microscopi”: a 3D printed automated XYZT fluorescence imaging system for teaching, outreach and fieldwork
Commercial fluorescence microscope stands and fully automated XYZt fluorescence imaging systems are generally beyond the limited budgets available for teaching and outreach. We have addressed this problem by developing “Microscopi”, an accessible, affordable, DIY automated imaging system that is built from 3D printed and commodity off-the-shelf hardware, including electro-mechanical, computer and optical components. Our design features automated sample navigation and image capture with a simple web-based graphical user interface, accessible with a tablet or other mobile device. The light path can easily be switched between different imaging modalities. The open source Python-based control software allows the hardware to be driven as an integrated imaging system. Furthermore, the microscope is fully customisable, which also enhances its value as a learning tool. Here, we describe the basic design and demonstrate imaging performance for a range of easily sourced specimens. Highlights: Portable, low cost, self-build from 3D printed and commodity components Multimodal imaging: bright field, dark field, pseudo-phase and fluorescence Automated XYZt imaging from a tablet or smartphone via a simple GUI Wide ranging applications in teaching, outreach and fieldwork Open source hardware and software design, allowing user modification
Open AccessDemocratising “Microscopi”: a 3D printed automated XYZT fluorescence imaging system for teaching, outreach and fieldwork
Commercial fluorescence microscope stands and fully automated XYZt fluorescence imaging systems are generally beyond the limited budgets available for teaching and outreach. We have addressed this problem by developing “Microscopi”, an accessible, affordable, DIY automated imaging system that is built from 3D printed and commodity off-the-shelf hardware, including electro-mechanical, computer and optical components. Our design features automated sample navigation and image capture with a simple web-based graphical user interface, accessible with a tablet or other mobile device. The light path can easily be switched between different imaging modalities. The open source Python-based control software allows the hardware to be driven as an integrated imaging system. Furthermore, the microscope is fully customisable, which also enhances its value as a learning tool. Here, we describe the basic design and demonstrate imaging performance for a range of easily sourced specimens. Highlights: Portable, low cost, self-build from 3D printed and commodity components Multimodal imaging: bright field, dark field, pseudo-phase and fluorescence Automated XYZt imaging from a tablet or smartphone via a simple GUI Wide ranging applications in teaching, outreach and fieldwork Open source hardware and software design, allowing user modification