Noritada Kaji
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Noritada Kaji has a total of 52 co-authors. Here are the top co-authors by number of shared publications:
Yoshinobu Baba
Department of Applied Chemistry, Graduate School of Engineering, Nagoya University, Nagoya 464-8603, Japan
15 shared publications- Manabu Tokeshi
Faculty of Engineering Hokkaido University Sapporo Japan
8 shared publications Manabu Tokeshi
Division of Biotechnology and Macromolecular Chemistry, Faculty of Engineering, Hokkaido University, Kita 13 Nishi 8, Kita-ku, Sapporo 060-8628, Japan
7 shared publications- Yukihiro Okamoto
Institute of Innovation for Future Society, Nagoya University
3 shared publications - Laili Mahmoudian
Department of Applied Chemistry, Graduate School of Engineering, MEXT Innovative Research Center for Preventive Medical Engineering, and Plasma Nanotechnology Research Center, Nagoya University, Japan
2 shared publications - Yoshinobu Baba
Research Institute for Quantum and Chemical Innovation, Institutes of Innovation for Future Society, Nagoya University
2 shared publications
Latest Publications
- Open Access
- 8 March 2017
- Published by Springer Nature in Scientific Reports
- Vol. 7 (1) , 43877
A millisecond micro-RNA separation technique by a hybrid structure of nanopillars and nanoslits
A millisecond micro-RNA separation of a mixture of total RNA and genomic DNA, extracted from cultured HeLa cells, was successfully achieved using a hybrid structure of nanopillars and nanoslits contained inside a microchannel. The nanopillars, 250-nm in diameter and 100-nm in height, were fabricated with a 750-nm space inside the nanoslits, which were 100-nm in height and 25-μm in width; the nanopillars were then applied as a new sieve matrix. This ultra-fast technique for the separation of miRNA can be an effective pretreatment for semiconductor nanopore DNA sequencing, which has an optimum reading speed of 1 base/ms to obtain effective signal-to-noise ratio and discriminate each base by ion or tunneling current during the passage of nucleic acids.
- 8 March 2017
- Published by Springer Nature in Scientific Reports
- Vol. 7 (1) , 43877
Open AccessA millisecond micro-RNA separation technique by a hybrid structure of nanopillars and nanoslits
A millisecond micro-RNA separation of a mixture of total RNA and genomic DNA, extracted from cultured HeLa cells, was successfully achieved using a hybrid structure of nanopillars and nanoslits contained inside a microchannel. The nanopillars, 250-nm in diameter and 100-nm in height, were fabricated with a 750-nm space inside the nanoslits, which were 100-nm in height and 25-μm in width; the nanopillars were then applied as a new sieve matrix. This ultra-fast technique for the separation of miRNA can be an effective pretreatment for semiconductor nanopore DNA sequencing, which has an optimum reading speed of 1 base/ms to obtain effective signal-to-noise ratio and discriminate each base by ion or tunneling current during the passage of nucleic acids.
- Open Access
- 4 July 2016
- Published by MDPI AG in Micromachines
- Vol. 7 (7) , 113
Microfluidic Autologous Serum Eye-Drops Preparation as a Potential Dry Eye Treatment
Dry eye is a problem in tearing quality and/or quantity and it afflicts millions of persons worldwide. An autologous serum eye-drop is a good candidate for dry eye treatment; however, the eye-drop preparation procedures take a long time and are relatively troublesome. Here we use spiral microchannels to demonstrate a strategy for the preparation of autologous serum eye-drops, which provide benefits for all dry eye patients; 100% and 90% removal efficiencies are achieved for 10 μm microbeads and whole human blood cells, respectively. Since our strategy allows researchers to integrate other functional microchannels into one device, such a microfluidic device will be able to offer a new one-step preparation system for autologous serum eye-drops.
- 4 July 2016
- Published by MDPI AG in Micromachines
- Vol. 7 (7) , 113
Open AccessMicrofluidic Autologous Serum Eye-Drops Preparation as a Potential Dry Eye Treatment
Dry eye is a problem in tearing quality and/or quantity and it afflicts millions of persons worldwide. An autologous serum eye-drop is a good candidate for dry eye treatment; however, the eye-drop preparation procedures take a long time and are relatively troublesome. Here we use spiral microchannels to demonstrate a strategy for the preparation of autologous serum eye-drops, which provide benefits for all dry eye patients; 100% and 90% removal efficiencies are achieved for 10 μm microbeads and whole human blood cells, respectively. Since our strategy allows researchers to integrate other functional microchannels into one device, such a microfluidic device will be able to offer a new one-step preparation system for autologous serum eye-drops.
- Open Access
- 4 May 2016
- Published by MDPI AG in Micromachines
- Vol. 7 (5) , 82
Three-Dimensional Fabrication for Microfluidics by Conventional Techniques and Equipment Used in Mass Production
This paper presents a simple three-dimensional (3D) fabrication method based on soft lithography techniques and laminated object manufacturing. The method can create 3D structures that have undercuts with general machines for mass production and laboratory scale prototyping. The minimum layer thickness of the method is at least 4 µm and bonding strength between layers is over 330 kPa. The performance reaches conventional fabrication techniques used for two-dimensionally (2D)-designed microfluidic devices. We fabricated some 3D structures, i.e., fractal structures, spiral structures, and a channel-in-channel structure, in microfluidic channels and demonstrated 3D microfluidics. The fabrication method can be achieved with a simple black light for bio-molecule detection; thus, it is useful for not only lab-scale rapid prototyping, but also for commercial manufacturing.
- 4 May 2016
- Published by MDPI AG in Micromachines
- Vol. 7 (5) , 82
Open AccessThree-Dimensional Fabrication for Microfluidics by Conventional Techniques and Equipment Used in Mass Production
This paper presents a simple three-dimensional (3D) fabrication method based on soft lithography techniques and laminated object manufacturing. The method can create 3D structures that have undercuts with general machines for mass production and laboratory scale prototyping. The minimum layer thickness of the method is at least 4 µm and bonding strength between layers is over 330 kPa. The performance reaches conventional fabrication techniques used for two-dimensionally (2D)-designed microfluidic devices. We fabricated some 3D structures, i.e., fractal structures, spiral structures, and a channel-in-channel structure, in microfluidic channels and demonstrated 3D microfluidics. The fabrication method can be achieved with a simple black light for bio-molecule detection; thus, it is useful for not only lab-scale rapid prototyping, but also for commercial manufacturing.
- 1 January 2015
- Published by Japan Society for Analytical Chemistry in BUNSEKI KAGAKU
- Vol. 64 (1) , 9-13
Development of a Micro RNA Extraction Chip from Human Tumor Cells
- 1 January 2015
- Published by Japan Society for Analytical Chemistry in BUNSEKI KAGAKU
- Vol. 64 (1) , 9-13
Development of a Micro RNA Extraction Chip from Human Tumor Cells
- 2 October 2013
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 3 (44) , 22301-22307
A microfluidic device for quantitative analysis of chemoattraction in plants
To precisely quantitate the effect of chemoattractants on directional pollen tube growth, a new microdevice was developed. Torenia fournieri pollen tubes, which generally grow freely on agarose medium, were funneled through a narrow flow channel that splits into a T-shaped channel leading to two reservoirs. The main channel was thus divided in two so that pollen tubes could choose their growth in either the left or right direction. Liquid solution or plant tissues were loaded into the reservoir, and diffusible molecules from the materials gradually spread in the narrow channel, leading to a concentration gradient. When egg-cell containing ovules were placed in one reservoir, pollen tubes grew selectively in that direction, suggesting that materials secreted from the ovules attracted the pollen tubes. Furthermore, UV-irradiation of female gametophytes in ovules decreased their ability to attract pollen tube growth. These results suggest that this novel device provides a unique platform for screening materials that may attract pollen tubes and for quantitatively analyzing the chemical features of attractants.
- 2 October 2013
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 3 (44) , 22301-22307
A microfluidic device for quantitative analysis of chemoattraction in plants
To precisely quantitate the effect of chemoattractants on directional pollen tube growth, a new microdevice was developed. Torenia fournieri pollen tubes, which generally grow freely on agarose medium, were funneled through a narrow flow channel that splits into a T-shaped channel leading to two reservoirs. The main channel was thus divided in two so that pollen tubes could choose their growth in either the left or right direction. Liquid solution or plant tissues were loaded into the reservoir, and diffusible molecules from the materials gradually spread in the narrow channel, leading to a concentration gradient. When egg-cell containing ovules were placed in one reservoir, pollen tubes grew selectively in that direction, suggesting that materials secreted from the ovules attracted the pollen tubes. Furthermore, UV-irradiation of female gametophytes in ovules decreased their ability to attract pollen tube growth. These results suggest that this novel device provides a unique platform for screening materials that may attract pollen tubes and for quantitatively analyzing the chemical features of attractants.
- Open Access
- 1 January 2012
- Published by Japan Society of Mechanical Engineers in TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series B
- Vol. 78 (788) , 762-768
Development of Mass-Producible Rapid Mixer Based on Baker's Transformation
- 1 January 2012
- Published by Japan Society of Mechanical Engineers in TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series B
- Vol. 78 (788) , 762-768
Open AccessDevelopment of Mass-Producible Rapid Mixer Based on Baker's Transformation
- 1 September 2010
- Published by AIP Publishing in Biomicrofluidics
- Vol. 4 (3) , 032210
DNA separation by cholesterol-bearing pullulan nanogels
We present an application of a novel DNA separation matrix, cholesterol-bearing pullulan (CHP) nanogels, for microchip electrophoresis. The solution of the CHP showed a unique phase transition around 30 mg/ml and formed gel phase over this critical concentration. This gel phase consists of the weak hydrophobic interactions between the cholesterols could be easily deformed by external forces, and thus, loading process of the CHP nanogels into microchannels became easier. The high concentration of the CHP nanogels provided excellent resolutions especially for small DNA fragments from 100 to 1500 bp. The separation mechanism was discussed based on Ogston and Reptation models which had developed in gels or polymer solutions. The result of a single molecule imaging gave us an insight of the separation mechanism and the nanogel structures as well.
- 1 September 2010
- Published by AIP Publishing in Biomicrofluidics
- Vol. 4 (3) , 032210
DNA separation by cholesterol-bearing pullulan nanogels
We present an application of a novel DNA separation matrix, cholesterol-bearing pullulan (CHP) nanogels, for microchip electrophoresis. The solution of the CHP showed a unique phase transition around 30 mg/ml and formed gel phase over this critical concentration. This gel phase consists of the weak hydrophobic interactions between the cholesterols could be easily deformed by external forces, and thus, loading process of the CHP nanogels into microchannels became easier. The high concentration of the CHP nanogels provided excellent resolutions especially for small DNA fragments from 100 to 1500 bp. The separation mechanism was discussed based on Ogston and Reptation models which had developed in gels or polymer solutions. The result of a single molecule imaging gave us an insight of the separation mechanism and the nanogel structures as well.
- 14 January 2010
- Published by Royal Society of Chemistry (RSC) in Chemical Society Reviews
- Vol. 39 (3) , 948-956
Nanopillar, nanoball, and nanofibers for highly efficient analysis of biomolecules
DNA separation technologies combined with micro- and nanofabrication technologies found a breakthrough in genotyping and DNA sequencing. This tutorial review outlines the fabrication technologies for nano-scaled structures inside microchannels and how the precisely designed structures contribute to obtaining higher performances in DNA separations from the viewpoint of the fabrication process, “top-down” nanofabrication and “bottom-up” molecular self-assembly approaches. It was found that these nanofabricated structures generated the unique separation modes that could not be achieved by random-sized pores of conventional gel or polymer systems. Furthermore, it was found that nanoscale-specific phenomena such as electroosmotic flow should be taken into consideration for further development of nanofabricated structures in DNA analysis. These separation technologies will contribute as a core technology for a future integrated biomolecule anlaysis chip.
- 14 January 2010
- Published by Royal Society of Chemistry (RSC) in Chemical Society Reviews
- Vol. 39 (3) , 948-956
Nanopillar, nanoball, and nanofibers for highly efficient analysis of biomolecules
DNA separation technologies combined with micro- and nanofabrication technologies found a breakthrough in genotyping and DNA sequencing. This tutorial review outlines the fabrication technologies for nano-scaled structures inside microchannels and how the precisely designed structures contribute to obtaining higher performances in DNA separations from the viewpoint of the fabrication process, “top-down” nanofabrication and “bottom-up” molecular self-assembly approaches. It was found that these nanofabricated structures generated the unique separation modes that could not be achieved by random-sized pores of conventional gel or polymer systems. Furthermore, it was found that nanoscale-specific phenomena such as electroosmotic flow should be taken into consideration for further development of nanofabricated structures in DNA analysis. These separation technologies will contribute as a core technology for a future integrated biomolecule anlaysis chip.
- 1 January 2010
- Published by Institute of Electrical Engineers of Japan (IEE Japan) in IEEJ Transactions on Sensors and Micromachines
- Vol. 130 (10) , 471-475
Development of an Easy and High-Throughput Cell Assay System with a Culture Chip and an Assay Chip
- 1 January 2010
- Published by Institute of Electrical Engineers of Japan (IEE Japan) in IEEJ Transactions on Sensors and Micromachines
- Vol. 130 (10) , 471-475
Development of an Easy and High-Throughput Cell Assay System with a Culture Chip and an Assay Chip
- 1 February 2009
- Published by Elsevier in Biophysical Journal
- Vol. 96 (3) , 292a-293a
A Novel Approach to the Detection of DNA-Enzyme Interaction Processes at a Single-Molecule Level
- 1 February 2009
- Published by Elsevier in Biophysical Journal
- Vol. 96 (3) , 292a-293a
A Novel Approach to the Detection of DNA-Enzyme Interaction Processes at a Single-Molecule Level