Mara Prentiss
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Mara Prentiss has a total of 94 co-authors. Here are the top co-authors by number of shared publications:
Claudia Danilowicz
Department of Physics, Harvard University, Cambridge, Massachusetts, USA
15 shared publications- Chantal Prévost
Laboratoire de BioChimie Théorique, CNRS
8 shared publications C. Danilowicz
Department of Physics, Harvard University, Cambridge, MA 02138, USA
7 shared publicationsVincent Coljee
Department of Physics, Harvard University, Cambridge, MA 02138, USA
5 shared publicationsChantal Prévost
Laboratoire de Biochimie Théorique, Institut de Biologie Physico-Chimique , Paris F-75005
4 shared publications- Claudia Danilowicz
Department of Physics, Harvard University
4 shared publications
Latest Publications
- Open Access
- 4 June 2026
- Published by National Academy of Sciences in Proceedings of the National Academy of Sciences
- Vol. 123 (23)
Direct evidence and quantification of homologous recognition between DNA duplexes
Stretches of double-stranded DNA sharing the same sequence can recognize each other in cells. This phenomenon, known as homologous recognition, is essential for DNA recombination and repair. Yet, its mechanism remains debated, with purely physical interactions proposed as a contributing factor. Here, we use a minimal DNA nanosensor to quantify homologous pairwise interactions with exquisite precision. We find that homology enhances the duplex–duplex affinity induced by physiological divalent cations and measure the homology-driven recognition free energy as ∼ − 0.01 kcal / mol per base pair. This affinity substantially enhances coalignment of homologous DNA in the confined geometry of the nanosensor, which mimics physical effects of concentrated biological environments. We introduce a quantitative electrostatic framework that attributes this emergent behavior to coherent charge distributions unique to homologous DNA. Our findings provide compelling evidence in support of purely physical sequence-specific interactions between intact double-stranded DNA, which may bear biological relevance for homologous recombination.
- 4 June 2026
- Published by National Academy of Sciences in Proceedings of the National Academy of Sciences
- Vol. 123 (23)
Open AccessDirect evidence and quantification of homologous recognition between DNA duplexes
Stretches of double-stranded DNA sharing the same sequence can recognize each other in cells. This phenomenon, known as homologous recognition, is essential for DNA recombination and repair. Yet, its mechanism remains debated, with purely physical interactions proposed as a contributing factor. Here, we use a minimal DNA nanosensor to quantify homologous pairwise interactions with exquisite precision. We find that homology enhances the duplex–duplex affinity induced by physiological divalent cations and measure the homology-driven recognition free energy as ∼ − 0.01 kcal / mol per base pair. This affinity substantially enhances coalignment of homologous DNA in the confined geometry of the nanosensor, which mimics physical effects of concentrated biological environments. We introduce a quantitative electrostatic framework that attributes this emergent behavior to coherent charge distributions unique to homologous DNA. Our findings provide compelling evidence in support of purely physical sequence-specific interactions between intact double-stranded DNA, which may bear biological relevance for homologous recombination.
- Open Access
- 20 May 2026
- Published by Oxford University Press (OUP) in Nucleic Acids Research
- Vol. 54 (10)
Collective interactions along recombinase-bound D-loops could speed repair of double-strand breaks by destabilizing flanking homoduplex tails
During repair of double-strand breaks, recombinases form D-loops in which one strand of the broken chromosome base pairs with a strand from an unbroken chromosome. Thus, the double-stranded DNA (dsDNA) in the unbroken chromosome must melt. Rapid repair requires quick melting. In this work, we present experimental results suggesting that both RecA and ScDmc1 form D-loops that distort the structure of long homoduplex tails in regions adjacent to recombinase-bound D-loops. The observed distortion is not simply due to attempted D-loop extension, but it is consistent with local melting of homoduplex tail regions adjacent to recombinase-bound D-loops. Our experiments indicate that the distortion arises from a collective interaction involving torsional stress that extends along RecA-bound D-loops from one homoduplex tail to the other. Furthermore, molecular dynamics simulations show melting in homoduplex tail regions adjacent to RecA-bound D-loops. Finally, we speculate that the destabilization in the base pairing in homoduplex tails flanking D-loops facilitates the extension of D-loops and underlies the previously observed extension of D-loops through 10 contiguous heterologous bases.
- 20 May 2026
- Published by Oxford University Press (OUP) in Nucleic Acids Research
- Vol. 54 (10)
Open AccessCollective interactions along recombinase-bound D-loops could speed repair of double-strand breaks by destabilizing flanking homoduplex tails
During repair of double-strand breaks, recombinases form D-loops in which one strand of the broken chromosome base pairs with a strand from an unbroken chromosome. Thus, the double-stranded DNA (dsDNA) in the unbroken chromosome must melt. Rapid repair requires quick melting. In this work, we present experimental results suggesting that both RecA and ScDmc1 form D-loops that distort the structure of long homoduplex tails in regions adjacent to recombinase-bound D-loops. The observed distortion is not simply due to attempted D-loop extension, but it is consistent with local melting of homoduplex tail regions adjacent to recombinase-bound D-loops. Our experiments indicate that the distortion arises from a collective interaction involving torsional stress that extends along RecA-bound D-loops from one homoduplex tail to the other. Furthermore, molecular dynamics simulations show melting in homoduplex tail regions adjacent to RecA-bound D-loops. Finally, we speculate that the destabilization in the base pairing in homoduplex tails flanking D-loops facilitates the extension of D-loops and underlies the previously observed extension of D-loops through 10 contiguous heterologous bases.
- Open Access
Mechanical response of the RecA nucleoprotein filament to increasing D-loop length
A bstract: Protein filaments play fundamental functions in the cell, ranging from scaffolding like in the cytoskeleton to sensing and transmitting forces and torques. Here we address the case of the nucleoprotein filaments (NPFs) of homologous recombination (HR) formed by the polymerization of the RecA protein on DNA. In contrast to the cytoskeleton filaments, the HR filaments are not known to exert or sense forces. However the stress in the stretched and unwound DNA bound to those filaments was shown to play a role in promoting DNA strand exchange during the early stage of the HR mechanism. Here we use molecular dynamics simulations to examine whether the strain in the nucleoprotein filament upon strand exchange progression and D-loop formation may influence subsequent steps of the HR process. Our results indicate that the filament mechanical properties are sensitive to the length of DNA incorporated in the D-loop. The response we observe upon increasing the D-loop length is first elastic, up to a threshold that we estimate to be 27 incorporated base pairs, after which the NPF enters a new stage where the protein-DNA connectivities are reorganized. Notably, the DNA displaced strand locally switches from site II to site III, a newly characterized binding site. We discuss the possible consequence of this mechanical response of the NPFs for the course of the HR process.
Open AccessMechanical response of the RecA nucleoprotein filament to increasing D-loop length
A bstract: Protein filaments play fundamental functions in the cell, ranging from scaffolding like in the cytoskeleton to sensing and transmitting forces and torques. Here we address the case of the nucleoprotein filaments (NPFs) of homologous recombination (HR) formed by the polymerization of the RecA protein on DNA. In contrast to the cytoskeleton filaments, the HR filaments are not known to exert or sense forces. However the stress in the stretched and unwound DNA bound to those filaments was shown to play a role in promoting DNA strand exchange during the early stage of the HR mechanism. Here we use molecular dynamics simulations to examine whether the strain in the nucleoprotein filament upon strand exchange progression and D-loop formation may influence subsequent steps of the HR process. Our results indicate that the filament mechanical properties are sensitive to the length of DNA incorporated in the D-loop. The response we observe upon increasing the D-loop length is first elastic, up to a threshold that we estimate to be 27 incorporated base pairs, after which the NPF enters a new stage where the protein-DNA connectivities are reorganized. Notably, the DNA displaced strand locally switches from site II to site III, a newly characterized binding site. We discuss the possible consequence of this mechanical response of the NPFs for the course of the HR process.
- Open Access
- 8 September 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Detection and quantification of counterion-mediated homologous recognition in double-stranded DNA
Stretches of double-stranded DNA sharing the same sequence can recognise each other in cells. This phenomenon, known as homologous recognition, is essential for DNA recombination and repair. Yet, its mechanism remains debated, with purely physical duplex duplex interactions being proposed as a contributing factor. Here, we use a simple DNA nanodevice to precisely quantify homology-driven interactions. We find that homology enhances the DNA-DNA affinity induced by physiological divalent cations and measure the homology-driven recognition free energy as ~−0.02 kT per base pair. This affinity substantially enhances coalignment of homologous DNA in the confined geometry of the nanodevice, and could be significant in concentrated biological environments. We introduce a quantitative electrostatic theory that attributes the observed recognition to coherent charge distributions on the surface of homologous duplexes. Our findings provide compelling evidence in support of a poorly understood class of non-canonical, sequence-specific interactions between intact double-stranded DNA, which may bear biological rel- evance for homologous recognition.
- 8 September 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessDetection and quantification of counterion-mediated homologous recognition in double-stranded DNA
Stretches of double-stranded DNA sharing the same sequence can recognise each other in cells. This phenomenon, known as homologous recognition, is essential for DNA recombination and repair. Yet, its mechanism remains debated, with purely physical duplex duplex interactions being proposed as a contributing factor. Here, we use a simple DNA nanodevice to precisely quantify homology-driven interactions. We find that homology enhances the DNA-DNA affinity induced by physiological divalent cations and measure the homology-driven recognition free energy as ~−0.02 kT per base pair. This affinity substantially enhances coalignment of homologous DNA in the confined geometry of the nanodevice, and could be significant in concentrated biological environments. We introduce a quantitative electrostatic theory that attributes the observed recognition to coherent charge distributions on the surface of homologous duplexes. Our findings provide compelling evidence in support of a poorly understood class of non-canonical, sequence-specific interactions between intact double-stranded DNA, which may bear biological rel- evance for homologous recognition.
- Open Access
- 10 May 2025
- Published by Oxford University Press (OUP) in Nucleic Acids Research
- Vol. 53 (9)
During recombinase-mediated homology recognition RecQ helicases inhibit formation of toxic long-lived D-loops that could promote genomic instability
Mutations in RecQ family helicases underlie human genetic disorders associated with genomic instability and cancer predisposition, but questions remain about how properly functioning RecQ reduces these deleterious effects. Importantly, some of the deleterious effects may result from incorrect repair of DNA double-strand breaks (DSBs) by recombinase proteins. Displacement loops (D-loops) are three-strand intermediates formed by recombinases during repair of DSB. RecQ helicases might enhance genome stability by disassembling incorrect recombinase-mediated D-loops formed between mismatched sequences and/or between short regions of accidental homology. We used bulk FRET and gel electrophoresis assays to probe the effects of RecQ family helicases in the context of ongoing recombinase-mediated D-loop formation. We found that RecQ does not differentially promote disassembly of short D-loops or D-loops that include mismatched base pairs. Thus, RecQ does not reduce genomic instability by discriminating against incorrect D-loops. In contrast, our results suggest that RecQ intervenes during D-loop formation to limit the length of recombinase-mediated D-loops. Without that intervention, D-loops can become so long that they do not spontaneously reverse. We suggest that RecQ prevents undesirable long-lived connections between chromosomes that could compromise chromosome metabolism and/or segregation and promote genomic instability.
- 10 May 2025
- Published by Oxford University Press (OUP) in Nucleic Acids Research
- Vol. 53 (9)
Open AccessDuring recombinase-mediated homology recognition RecQ helicases inhibit formation of toxic long-lived D-loops that could promote genomic instability
Mutations in RecQ family helicases underlie human genetic disorders associated with genomic instability and cancer predisposition, but questions remain about how properly functioning RecQ reduces these deleterious effects. Importantly, some of the deleterious effects may result from incorrect repair of DNA double-strand breaks (DSBs) by recombinase proteins. Displacement loops (D-loops) are three-strand intermediates formed by recombinases during repair of DSB. RecQ helicases might enhance genome stability by disassembling incorrect recombinase-mediated D-loops formed between mismatched sequences and/or between short regions of accidental homology. We used bulk FRET and gel electrophoresis assays to probe the effects of RecQ family helicases in the context of ongoing recombinase-mediated D-loop formation. We found that RecQ does not differentially promote disassembly of short D-loops or D-loops that include mismatched base pairs. Thus, RecQ does not reduce genomic instability by discriminating against incorrect D-loops. In contrast, our results suggest that RecQ intervenes during D-loop formation to limit the length of recombinase-mediated D-loops. Without that intervention, D-loops can become so long that they do not spontaneously reverse. We suggest that RecQ prevents undesirable long-lived connections between chromosomes that could compromise chromosome metabolism and/or segregation and promote genomic instability.
- Open Access
Plasticity and Co-Factor-Dependent Structural Changes in the RecA Nucleoprotein Filament Studied by Small-Angle X-Ray Scattering (SAXS) Measurements and Molecular Modeling
Structural analyses of protein filaments formed by self-assembly, such as actin, tubulin, or recombinase filaments, have suffered for decades from technical issues due to difficulties in crystallization, their large size, or the dynamic behavior inherent to their cellular function. The advent of cryo-electron microscopy has finally enabled us to obtain structures at different stages of the existence of these filaments. However, these structures correspond to frozen states, and the possibility of observations in solution is still lacking, especially for filaments characterized by a high plasticity, such as the RecA protein for homologous recombination. Here, we use a combination of SAXS measurements and integrative modeling to generate the solution structure of two known forms of the RecA nucleoprotein filament, previously characterized by electron microscopy and resolved by X-ray crystallography. The two forms differ in the cofactor bound to RecA–RecA interfaces, either ATP or ADP. Cooperative transition from one form to the other has been observed during single-molecule experiments by pulling on the filament but also in solution by modifying solvent conditions. We first compare the SAXS data against known structural information. While the crystal structure of the ATP form matches well with the SAXS data, we deduce from the SAXS profiles of the ADP-form values of the pitch (72.0 Å) and the number of monomers per turn (6.4) that differ with respect to the crystal structure (respectively, 82.7 Å and 6.0). We then monitor the transition between the two states driven by the addition of magnesium, and we show this transition occurs with 0.3 mM Mg 2+ ions with a high cooperativity.
Open AccessPlasticity and Co-Factor-Dependent Structural Changes in the RecA Nucleoprotein Filament Studied by Small-Angle X-Ray Scattering (SAXS) Measurements and Molecular Modeling
Structural analyses of protein filaments formed by self-assembly, such as actin, tubulin, or recombinase filaments, have suffered for decades from technical issues due to difficulties in crystallization, their large size, or the dynamic behavior inherent to their cellular function. The advent of cryo-electron microscopy has finally enabled us to obtain structures at different stages of the existence of these filaments. However, these structures correspond to frozen states, and the possibility of observations in solution is still lacking, especially for filaments characterized by a high plasticity, such as the RecA protein for homologous recombination. Here, we use a combination of SAXS measurements and integrative modeling to generate the solution structure of two known forms of the RecA nucleoprotein filament, previously characterized by electron microscopy and resolved by X-ray crystallography. The two forms differ in the cofactor bound to RecA–RecA interfaces, either ATP or ADP. Cooperative transition from one form to the other has been observed during single-molecule experiments by pulling on the filament but also in solution by modifying solvent conditions. We first compare the SAXS data against known structural information. While the crystal structure of the ATP form matches well with the SAXS data, we deduce from the SAXS profiles of the ADP-form values of the pitch (72.0 Å) and the number of monomers per turn (6.4) that differ with respect to the crystal structure (respectively, 82.7 Å and 6.0). We then monitor the transition between the two states driven by the addition of magnesium, and we show this transition occurs with 0.3 mM Mg 2+ ions with a high cooperativity.
- Open Access
- 11 October 2024
- Published by Elsevier in Journal of Biological Chemistry
- Vol. 300 (11) , 107887
Insight into RecA-mediated repair of double strand breaks is provided by probing how contiguous heterology affects recombination
- 11 October 2024
- Published by Elsevier in Journal of Biological Chemistry
- Vol. 300 (11) , 107887
Open AccessInsight into RecA-mediated repair of double strand breaks is provided by probing how contiguous heterology affects recombination
- Open Access
- 4 October 2023
- Published by MDPI AG in International Journal of Molecular Sciences
- Vol. 24 (19) , 14896
Modeling the Homologous Recombination Process: Methods, Successes and Challenges
Homologous recombination (HR) is a fundamental process common to all species. HR aims to faithfully repair DNA double strand breaks. HR involves the formation of nucleoprotein filaments on DNA single strands (ssDNA) resected from the break. The nucleoprotein filaments search for homologous regions in the genome and promote strand exchange with the ssDNA homologous region in an unbroken copy of the genome. HR has been the object of intensive studies for decades. Because multi-scale dynamics is a fundamental aspect of this process, studying HR is highly challenging, both experimentally and using computational approaches. Nevertheless, knowledge has built up over the years and has recently progressed at an accelerated pace, borne by increasingly focused investigations using new techniques such as single molecule approaches. Linking this knowledge to the atomic structure of the nucleoprotein filament systems and the succession of unstable, transient intermediate steps that takes place during the HR process remains a challenge; modeling retains a very strong role in bridging the gap between structures that are stable enough to be observed and in exploring transition paths between these structures. However, working on ever-changing long filament systems submitted to kinetic processes is full of pitfalls. This review presents the modeling tools that are used in such studies, their possibilities and limitations, and reviews the advances in the knowledge of the HR process that have been obtained through modeling. Notably, we will emphasize how cooperative behavior in the HR nucleoprotein filament enables modeling to produce reliable information.
- 4 October 2023
- Published by MDPI AG in International Journal of Molecular Sciences
- Vol. 24 (19) , 14896
Open AccessModeling the Homologous Recombination Process: Methods, Successes and Challenges
Homologous recombination (HR) is a fundamental process common to all species. HR aims to faithfully repair DNA double strand breaks. HR involves the formation of nucleoprotein filaments on DNA single strands (ssDNA) resected from the break. The nucleoprotein filaments search for homologous regions in the genome and promote strand exchange with the ssDNA homologous region in an unbroken copy of the genome. HR has been the object of intensive studies for decades. Because multi-scale dynamics is a fundamental aspect of this process, studying HR is highly challenging, both experimentally and using computational approaches. Nevertheless, knowledge has built up over the years and has recently progressed at an accelerated pace, borne by increasingly focused investigations using new techniques such as single molecule approaches. Linking this knowledge to the atomic structure of the nucleoprotein filament systems and the succession of unstable, transient intermediate steps that takes place during the HR process remains a challenge; modeling retains a very strong role in bridging the gap between structures that are stable enough to be observed and in exploring transition paths between these structures. However, working on ever-changing long filament systems submitted to kinetic processes is full of pitfalls. This review presents the modeling tools that are used in such studies, their possibilities and limitations, and reviews the advances in the knowledge of the HR process that have been obtained through modeling. Notably, we will emphasize how cooperative behavior in the HR nucleoprotein filament enables modeling to produce reliable information.
- Open Access
- 13 July 2023
- Published by Public Library of Science (PLoS) in PLOS ONE
- Vol. 18 (7) , e0288611
Highly mismatch-tolerant homology testing by RecA could explain how homology length affects recombination
In E. coli, double strand breaks (DSBs) are resected and loaded with RecA protein. The genome is then rapidly searched for a sequence that is homologous to the DNA flanking the DSB. Mismatches in homologous partners are rare, suggesting that RecA should rapidly reject mismatched recombination products; however, this is not the case. Decades of work have shown that long lasting recombination products can include many mismatches. In this work, we show that in vitro RecA forms readily observable recombination products when 16% of the bases in the product are mismatched. We also consider various theoretical models of mismatch-tolerant homology testing. The models test homology by comparing the sequences of Ltest bases in two single-stranded DNAs (ssDNA) from the same genome. If the two sequences pass the homology test, the pairing between the two ssDNA becomes permanent. Stringency is the fraction of permanent pairings that join ssDNA from the same positions in the genome. We applied the models to both randomly generated genomes and bacterial genomes. For both randomly generated genomes and bacterial genomes, the models show that if no mismatches are accepted stringency is ∼ 99% when Ltest = 14 bp. For randomly generated genomes, stringency decreases with increasing mismatch tolerance, and stringency improves with increasing Ltest. In contrast, in bacterial genomes when Ltest ∼ 75 bp, stringency is ∼ 99% for both mismatch-intolerant and mismatch-tolerant homology testing. Furthermore, increasing Ltest does not improve stringency because most incorrect pairings join different copies of repeats. In sum, for bacterial genomes highly mismatch tolerant homology testing of 75 bp provides the same stringency as homology testing that rejects all mismatches and testing more than ∼75 base pairs is not useful. Interestingly, in vivo commitment to recombination typically requires homology testing of ∼ 75 bp, consistent with highly mismatch intolerant testing.
- 13 July 2023
- Published by Public Library of Science (PLoS) in PLOS ONE
- Vol. 18 (7) , e0288611
Open AccessHighly mismatch-tolerant homology testing by RecA could explain how homology length affects recombination
In E. coli, double strand breaks (DSBs) are resected and loaded with RecA protein. The genome is then rapidly searched for a sequence that is homologous to the DNA flanking the DSB. Mismatches in homologous partners are rare, suggesting that RecA should rapidly reject mismatched recombination products; however, this is not the case. Decades of work have shown that long lasting recombination products can include many mismatches. In this work, we show that in vitro RecA forms readily observable recombination products when 16% of the bases in the product are mismatched. We also consider various theoretical models of mismatch-tolerant homology testing. The models test homology by comparing the sequences of Ltest bases in two single-stranded DNAs (ssDNA) from the same genome. If the two sequences pass the homology test, the pairing between the two ssDNA becomes permanent. Stringency is the fraction of permanent pairings that join ssDNA from the same positions in the genome. We applied the models to both randomly generated genomes and bacterial genomes. For both randomly generated genomes and bacterial genomes, the models show that if no mismatches are accepted stringency is ∼ 99% when Ltest = 14 bp. For randomly generated genomes, stringency decreases with increasing mismatch tolerance, and stringency improves with increasing Ltest. In contrast, in bacterial genomes when Ltest ∼ 75 bp, stringency is ∼ 99% for both mismatch-intolerant and mismatch-tolerant homology testing. Furthermore, increasing Ltest does not improve stringency because most incorrect pairings join different copies of repeats. In sum, for bacterial genomes highly mismatch tolerant homology testing of 75 bp provides the same stringency as homology testing that rejects all mismatches and testing more than ∼75 base pairs is not useful. Interestingly, in vivo commitment to recombination typically requires homology testing of ∼ 75 bp, consistent with highly mismatch intolerant testing.
- Open Access
RecA balances genomic stability and evolution using many successive mismatch tolerant homology tests
A double-strand break (DSB) must usually be repaired with as little alteration to the genome as possible, though some rare alterations provide valuable genomic evolution. In E . coli , a DSB undergoes resection to give 3’ ssDNA tails. These invading strand tails are loaded with RecA protein and then rapidly search the genome for the corresponding (allelic) partner. Thus, a searching ssDNA/RecA filament must almost never make stable non-allelic contact; therefore, it has been puzzling that RecA forms stable products that join partially homologous sequences. Homology testing by RecA family proteins begins with an 8-bp test, followed by successive homology tests of base pair triplets. Here we introduce a highly simplified homology recognition model to highlight how mismatch sensitivity could affect non-allelic pairing in bacterial genomes. The model predicts that even if each triplet test accepts 2 mismatches, RecA can have ∼ 95% probability of establishing allelic pairing after a DSB in E. coli ; however, that accuracy requires homology testing ⪆50 contiguous base pairs, consistent with the homology lengths probed in vivo . In contrast, if no mismatches are accepted testing 14 bp is sufficient, and testing more base pairs does not reduce non-allelic pairing because bacterial genomes contain long repeats.
Open AccessRecA balances genomic stability and evolution using many successive mismatch tolerant homology tests
A double-strand break (DSB) must usually be repaired with as little alteration to the genome as possible, though some rare alterations provide valuable genomic evolution. In E . coli , a DSB undergoes resection to give 3’ ssDNA tails. These invading strand tails are loaded with RecA protein and then rapidly search the genome for the corresponding (allelic) partner. Thus, a searching ssDNA/RecA filament must almost never make stable non-allelic contact; therefore, it has been puzzling that RecA forms stable products that join partially homologous sequences. Homology testing by RecA family proteins begins with an 8-bp test, followed by successive homology tests of base pair triplets. Here we introduce a highly simplified homology recognition model to highlight how mismatch sensitivity could affect non-allelic pairing in bacterial genomes. The model predicts that even if each triplet test accepts 2 mismatches, RecA can have ∼ 95% probability of establishing allelic pairing after a DSB in E. coli ; however, that accuracy requires homology testing ⪆50 contiguous base pairs, consistent with the homology lengths probed in vivo . In contrast, if no mismatches are accepted testing 14 bp is sufficient, and testing more base pairs does not reduce non-allelic pairing because bacterial genomes contain long repeats.