Katrin Kahlen
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Katrin Kahlen has a total of 4 co-authors. Here are the top co-authors by number of shared publications:
Hartmut Stützel
Institute of Biological Production Systems, Leibniz Universität Hannover, Herrenhäuser Straße 2, 30419 Hannover, Germany
4 shared publicationsDirk Wiechers
AInstitute of Biological Production Systems, Leibniz Universität Hannover, Herrenhäuser Straße 2, 30419 Hannover, Germany
1 shared publication- Dirk Wiechers
Institute of Biological Production Systems, Leibniz Universität Hannover, Herrenhäuserstr. 2, 30419 Hannover, Germany
1 shared publication Hartmut Stuetzel
1 shared publication
Latest Publications
- Open Access
- 3 June 2011
- Published by Oxford University Press (OUP) in Annals of Botany
- Vol. 108 (6) , 1055-1063
Simplification of a light-based model for estimating final internode length in greenhouse cucumber canopies
Light quantity and quality affect internode lengths in cucumber (Cucumis sativus), whereby leaf area and the optical properties of the leaves mainly control light quality within a cucumber plant community. This modelling study aimed at providing a simple, non-destructive method to predict final internode lengths (FILs) using light quantity and leaf area data. Several simplifications of a light quantity and quality sensitive model for estimating FILs in cucumber have been tested. The direct simplifications substitute the term for the red : far-red (R : FR) ratios, by a term for (a) the leaf area index (LAI, m2 m−2) or (b) partial LAI, the cumulative leaf area per m2 ground, where leaf area per m2 ground is accumulated from the top of each plant until a number, n, of leaves per plant is reached. The indirect simplifications estimate the input R : FR ratio based on partial leaf area and plant density. In all models, simulated FILs were in line with the measured FILs over various canopy architectures and light conditions, but the prediction quality varied. The indirect simplification based on leaf area of ten leaves revealed the best fit with measured data. Its prediction quality was even higher than of the original model. This study showed that for vertically trained cucumber plants, leaf area data can substitute local light quality data for estimating FIL data. In unstressed canopies, leaf area over the upper ten ranks seems to represent the feedback of the growing architecture on internode elongation with respect to light quality. This highlights the role of this domain of leaves as the primary source for the specific R : FR signal controlling the final length of an internode and could therefore guide future research on up-scaling local processes to the crop level.
- 3 June 2011
- Published by Oxford University Press (OUP) in Annals of Botany
- Vol. 108 (6) , 1055-1063
Open AccessSimplification of a light-based model for estimating final internode length in greenhouse cucumber canopies
Light quantity and quality affect internode lengths in cucumber (Cucumis sativus), whereby leaf area and the optical properties of the leaves mainly control light quality within a cucumber plant community. This modelling study aimed at providing a simple, non-destructive method to predict final internode lengths (FILs) using light quantity and leaf area data. Several simplifications of a light quantity and quality sensitive model for estimating FILs in cucumber have been tested. The direct simplifications substitute the term for the red : far-red (R : FR) ratios, by a term for (a) the leaf area index (LAI, m2 m−2) or (b) partial LAI, the cumulative leaf area per m2 ground, where leaf area per m2 ground is accumulated from the top of each plant until a number, n, of leaves per plant is reached. The indirect simplifications estimate the input R : FR ratio based on partial leaf area and plant density. In all models, simulated FILs were in line with the measured FILs over various canopy architectures and light conditions, but the prediction quality varied. The indirect simplification based on leaf area of ten leaves revealed the best fit with measured data. Its prediction quality was even higher than of the original model. This study showed that for vertically trained cucumber plants, leaf area data can substitute local light quality data for estimating FIL data. In unstressed canopies, leaf area over the upper ten ranks seems to represent the feedback of the growing architecture on internode elongation with respect to light quality. This highlights the role of this domain of leaves as the primary source for the specific R : FR signal controlling the final length of an internode and could therefore guide future research on up-scaling local processes to the crop level.
- 19 January 2011
- Published by Wiley in New Phytologist
- Vol. 190 (3) , 697-708
Modelling photo‐modulated internode elongation in growing glasshouse cucumber canopies
• Growing glasshouse plant canopies are exposed to natural fluctuations in light quantity, and the dynamically changing canopy architecture induces local variations in light quality. This modelling study aimed to analyse the importance of both light signals for an accurate prediction of individual internode lengths. • We conceptualized two model approaches for estimating final internode lengths (FILs). The first one is only photosynthetically active radiation (PAR)-sensitive and ignores canopy architecture, whereas the second approach uses a functional-structural growth model for considering variations in both PAR and red : far-red (R : FR) ratio (L-Cucumber). Internode lengths measured in three experiments were used for model parameterization and evaluation. • The overall trends for the simulated FILs using the exclusively PAR-sensitive model approach were already in line with the measured FILs, but they underestimated FILs at higher ranks. L-Cucumber provided considerably better FIL predictions under various light conditions and canopy architectures. • Both light signals are needed for an accurate estimation of the FILs, and only L-Cucumber is able to consider R : FR signals from the growing canopy. Yet this study highlights the significance of the PAR signal for predicting FILs as neighbour effects increase, which indicates a potential role of photosynthate signalling in internode elongation.
- 19 January 2011
- Published by Wiley in New Phytologist
- Vol. 190 (3) , 697-708
Modelling photo‐modulated internode elongation in growing glasshouse cucumber canopies
• Growing glasshouse plant canopies are exposed to natural fluctuations in light quantity, and the dynamically changing canopy architecture induces local variations in light quality. This modelling study aimed to analyse the importance of both light signals for an accurate prediction of individual internode lengths. • We conceptualized two model approaches for estimating final internode lengths (FILs). The first one is only photosynthetically active radiation (PAR)-sensitive and ignores canopy architecture, whereas the second approach uses a functional-structural growth model for considering variations in both PAR and red : far-red (R : FR) ratio (L-Cucumber). Internode lengths measured in three experiments were used for model parameterization and evaluation. • The overall trends for the simulated FILs using the exclusively PAR-sensitive model approach were already in line with the measured FILs, but they underestimated FILs at higher ranks. L-Cucumber provided considerably better FIL predictions under various light conditions and canopy architectures. • Both light signals are needed for an accurate estimation of the FILs, and only L-Cucumber is able to consider R : FR signals from the growing canopy. Yet this study highlights the significance of the PAR signal for predicting FILs as neighbour effects increase, which indicates a potential role of photosynthate signalling in internode elongation.
- 1 June 2009
- Published by Elsevier in Comparative Biochemistry and Physiology Part A: Molecular & Integrative Physiology
- Vol. 153 (2) , S226
Simulating the effect of light on greenhouse cucumber architecture
- 1 June 2009
- Published by Elsevier in Comparative Biochemistry and Physiology Part A: Molecular & Integrative Physiology
- Vol. 153 (2) , S226
Simulating the effect of light on greenhouse cucumber architecture
- 11 November 2008
- Published by CSIRO Publishing in Functional Plant Biology
- Vol. 35 (10) , 876-884
Modelling leaf phototropism in a cucumber canopy
Leaf phototropism might have significant effects on the light interception, dry matter production and yield of cucumber (Cucumis sativus L.). The objective of the present study was to model the phototropism of leaves in a greenhouse cucumber canopy. The dynamic structural model of cucumber using a parametric L-system was extended to mimic the leaf movement induced by gradients in the local light environment of each leaf. The red to far-red (R : FR) ratio is known to be a driving force in shade avoidance reactions of plants. In the model, R : FR ratios on the left and right leaf half of each individual leaf lamina were calculated and the change in tropism angle per phyllochron was based on the R : FR gradient across the leaf halves. The tropism angle of a leaf describes the deviation of the present leaf azimuth from the initial leaf orientation, which is predefined by the phyllotaxis of the plant. Even in its simple form, the model simulated photo-morphogenic canopy responses.
- 11 November 2008
- Published by CSIRO Publishing in Functional Plant Biology
- Vol. 35 (10) , 876-884
Modelling leaf phototropism in a cucumber canopy
Leaf phototropism might have significant effects on the light interception, dry matter production and yield of cucumber (Cucumis sativus L.). The objective of the present study was to model the phototropism of leaves in a greenhouse cucumber canopy. The dynamic structural model of cucumber using a parametric L-system was extended to mimic the leaf movement induced by gradients in the local light environment of each leaf. The red to far-red (R : FR) ratio is known to be a driving force in shade avoidance reactions of plants. In the model, R : FR ratios on the left and right leaf half of each individual leaf lamina were calculated and the change in tropism angle per phyllochron was based on the R : FR gradient across the leaf halves. The tropism angle of a leaf describes the deviation of the present leaf azimuth from the initial leaf orientation, which is predefined by the phyllotaxis of the plant. Even in its simple form, the model simulated photo-morphogenic canopy responses.
- 1 July 2007
- Published by American Society for Horticultural Science in Journal of the American Society for Horticultural Science
- Vol. 132 (4) , 439-446
Estimation of Geometric Attributes and Masses of Individual Cucumber Organs Using Three-dimensional Digitizing and Allometric Relationships
The objective of this study was to estimate geometric attributes and masses of individual cucumber ( Cucumis sativus L.) organs in situ. Using three-dimensional (3D) digitizing techniques, geometric data were obtained that were used to establish allometric relationships between geometric organ attribute and organ mass. Moreover, the authors were looking for the effects of ontogeny and the influence of environmental factors on the allometric relationships in cucumber. If such an allometric relationship did not exist, they alternatively tested the relationship between organ dry weight and organ number counted from the top of the plant downward. Lastly, they included allometric relationships based on biomechanical approaches focused on lamina mass and petiole attributes. The digitizing method provided accurate data for the calculation of geometric plant part attributes, such as length, area, and volume. Based on these data it was possible to describe the relationships between plant part dry weight and plant part geometry by allometric functions except for internode length. Apart from this exception, two different kinds of allometric equations were used: a simple power function with two parameters and a linear function without intercept. Information about more than one dimension of the considered plant part (e.g., area or volume) led to a simple linear relationship, whereas knowledge of just one dimension, like plant part length, resulted in more complex nonlinear relationships. Ontogeny led, in general, to a reduction in the scaling exponent or in the scaling factor, whereas changes of the environment distributed these values. Considering these effects makes it possible to determine dry matter partitioning on organ scale nondestructively and investigate long-term processes on intact plants.
- 1 July 2007
- Published by American Society for Horticultural Science in Journal of the American Society for Horticultural Science
- Vol. 132 (4) , 439-446
Estimation of Geometric Attributes and Masses of Individual Cucumber Organs Using Three-dimensional Digitizing and Allometric Relationships
The objective of this study was to estimate geometric attributes and masses of individual cucumber ( Cucumis sativus L.) organs in situ. Using three-dimensional (3D) digitizing techniques, geometric data were obtained that were used to establish allometric relationships between geometric organ attribute and organ mass. Moreover, the authors were looking for the effects of ontogeny and the influence of environmental factors on the allometric relationships in cucumber. If such an allometric relationship did not exist, they alternatively tested the relationship between organ dry weight and organ number counted from the top of the plant downward. Lastly, they included allometric relationships based on biomechanical approaches focused on lamina mass and petiole attributes. The digitizing method provided accurate data for the calculation of geometric plant part attributes, such as length, area, and volume. Based on these data it was possible to describe the relationships between plant part dry weight and plant part geometry by allometric functions except for internode length. Apart from this exception, two different kinds of allometric equations were used: a simple power function with two parameters and a linear function without intercept. Information about more than one dimension of the considered plant part (e.g., area or volume) led to a simple linear relationship, whereas knowledge of just one dimension, like plant part length, resulted in more complex nonlinear relationships. Ontogeny led, in general, to a reduction in the scaling exponent or in the scaling factor, whereas changes of the environment distributed these values. Considering these effects makes it possible to determine dry matter partitioning on organ scale nondestructively and investigate long-term processes on intact plants.