Jeffry D. Sander
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Jeffry D. Sander has a total of 33 co-authors. Here are the top co-authors by number of shared publications:
- J. Keith Joung
Molecular Pathology Unit, Massachusetts General Hospital
8 shared publications Deepak Reyon
Molecular Pathology Unit, Center for Computational and Integrative Biology, Massachusetts General Hospital, Charlestown, Massachusetts, USA
6 shared publicationsCyd Khayter
Molecular Pathology Unit, Center for Computational and Integrative Biology, and Center for Cancer Research, Massachusetts General Hospital, Charlestown, MA 02129 USA
5 shared publications- Daniel F. Voytas
Department of Genetics, Cell Biology and Development, University of Minnesota, United States
3 shared publications - Drena Dobbs
Iowa State University
3 shared publications - Deepak Reyon
Department of Genetics, Development and Cell Biology, Iowa State University, Ames IA 50011, USA
2 shared publications
Latest Publications
- 1 August 2013
- Published by Springer Nature in Science-Business eXchange
- Vol. 6 (29) , 768
Quantification of clustered, regularly interspaced short palindromic repeats (CRISPR)-based editing system specificity
- 1 August 2013
- Published by Springer Nature in Science-Business eXchange
- Vol. 6 (29) , 768
Quantification of clustered, regularly interspaced short palindromic repeats (CRISPR)-based editing system specificity
- Open Access
- 1 July 2013
- Published by Wiley in Current Protocols in Molecular Biology
- Vol. 103 (1) , 12.16.1-12.16.18
Engineering Customized TALE Nucleases (TALENs) and TALE Transcription Factors by Fast Ligation‐Based Automatable Solid‐Phase High‐Throughput (FLASH) Assembly
Customized DNA‐binding domains made using transcription activator‐like effector (TALE) repeats are rapidly growing in importance as widely applicable research tools. TALE nucleases (TALENs), composed of an engineered array of TALE repeats fused to the FokI nuclease domain, have been used successfully for directed genome editing in various organisms and cell types. TALE transcription factors (TALE‐TFs), consisting of engineered TALE repeat arrays linked to a transcriptional regulatory domain, have been used to up‐ or downregulate expression of endogenous genes in human cells and plants. This unit describes a detailed protocol for the recently described fast ligation‐based automatable solid‐phase high‐throughput (FLASH) assembly method. FLASH enables automated high‐throughput construction of engineered TALE repeats using an automated liquid handling robot or manually using a multichannel pipet. Using the automated approach, a single researcher can construct up to 96 DNA fragments encoding TALE repeat arrays of various lengths in a single day, and then clone these to construct sequence‐verified TALEN or TALE‐TF expression plasmids in a week or less. Plasmids required for FLASH are available by request from the Joung lab (http://eGenome.org). This unit also describes improvements to the Zinc Finger and TALE Targeter (ZiFiT Targeter) web server (http://ZiFiT.partners.org) that facilitate the design and construction of FLASH TALE repeat arrays in high throughput. Curr. Protoc. Mol. Biol. 103:12.16.1–12.16.18. © 2013 by John Wiley & Sons, Inc.
- 1 July 2013
- Published by Wiley in Current Protocols in Molecular Biology
- Vol. 103 (1) , 12.16.1-12.16.18
Open AccessEngineering Customized TALE Nucleases (TALENs) and TALE Transcription Factors by Fast Ligation‐Based Automatable Solid‐Phase High‐Throughput (FLASH) Assembly
Customized DNA‐binding domains made using transcription activator‐like effector (TALE) repeats are rapidly growing in importance as widely applicable research tools. TALE nucleases (TALENs), composed of an engineered array of TALE repeats fused to the FokI nuclease domain, have been used successfully for directed genome editing in various organisms and cell types. TALE transcription factors (TALE‐TFs), consisting of engineered TALE repeat arrays linked to a transcriptional regulatory domain, have been used to up‐ or downregulate expression of endogenous genes in human cells and plants. This unit describes a detailed protocol for the recently described fast ligation‐based automatable solid‐phase high‐throughput (FLASH) assembly method. FLASH enables automated high‐throughput construction of engineered TALE repeats using an automated liquid handling robot or manually using a multichannel pipet. Using the automated approach, a single researcher can construct up to 96 DNA fragments encoding TALE repeat arrays of various lengths in a single day, and then clone these to construct sequence‐verified TALEN or TALE‐TF expression plasmids in a week or less. Plasmids required for FLASH are available by request from the Joung lab (http://eGenome.org). This unit also describes improvements to the Zinc Finger and TALE Targeter (ZiFiT Targeter) web server (http://ZiFiT.partners.org) that facilitate the design and construction of FLASH TALE repeat arrays in high throughput. Curr. Protoc. Mol. Biol. 103:12.16.1–12.16.18. © 2013 by John Wiley & Sons, Inc.
- Top Cited PapersOpen Access
- 23 June 2013
- Published by Springer Nature in Nature Biotechnology
- Vol. 31 (9) , 822-826
High-frequency off-target mutagenesis induced by CRISPR-Cas nucleases in human cells
CAS9 nucleases, a new tool for genome editing, show significant offtarget activity. Clustered, regularly interspaced, short palindromic repeat (CRISPR) RNA-guided nucleases (RGNs) have rapidly emerged as a facile and efficient platform for genome editing. Here, we use a human cell–based reporter assay to characterize off-target cleavage of CRISPR-associated (Cas)9-based RGNs. We find that single and double mismatches are tolerated to varying degrees depending on their position along the guide RNA (gRNA)-DNA interface. We also readily detected off-target alterations induced by four out of six RGNs targeted to endogenous loci in human cells by examination of partially mismatched sites. The off-target sites we identified harbored up to five mismatches and many were mutagenized with frequencies comparable to (or higher than) those observed at the intended on-target site. Our work demonstrates that RGNs can be highly active even with imperfectly matched RNA-DNA interfaces in human cells, a finding that might confound their use in research and therapeutic applications.
- 23 June 2013
- Published by Springer Nature in Nature Biotechnology
- Vol. 31 (9) , 822-826
Top Cited PapersOpen AccessHigh-frequency off-target mutagenesis induced by CRISPR-Cas nucleases in human cells
CAS9 nucleases, a new tool for genome editing, show significant offtarget activity. Clustered, regularly interspaced, short palindromic repeat (CRISPR) RNA-guided nucleases (RGNs) have rapidly emerged as a facile and efficient platform for genome editing. Here, we use a human cell–based reporter assay to characterize off-target cleavage of CRISPR-associated (Cas)9-based RGNs. We find that single and double mismatches are tolerated to varying degrees depending on their position along the guide RNA (gRNA)-DNA interface. We also readily detected off-target alterations induced by four out of six RGNs targeted to endogenous loci in human cells by examination of partially mismatched sites. The off-target sites we identified harbored up to five mismatches and many were mutagenized with frequencies comparable to (or higher than) those observed at the intended on-target site. Our work demonstrates that RGNs can be highly active even with imperfectly matched RNA-DNA interfaces in human cells, a finding that might confound their use in research and therapeutic applications.
- Open Access
- 1 October 2012
- Published by Wiley in Current Protocols in Molecular Biology
- Vol. 100 (1) , 12.15.1-12.15.14
Engineering Designer Transcription Activator‐‐Like Effector Nucleases (TALENs) by REAL or REAL‐Fast Assembly
Engineered transcription activator–like effector nucleases (TALENs) are broadly useful tools for performing targeted genome editing in a wide variety of organisms and cell types including plants, zebrafish, C. elegans, rat, human somatic cells, and human pluripotent stem cells. Here we describe detailed protocols for the serial, hierarchical assembly of TALENs that require neither PCR nor specialized multi‐fragment ligations and that can be implemented by any laboratory. These restriction enzyme and ligation (REAL)–based protocols can be practiced using plasmid libraries and user‐friendly, Web‐based software that both identifies target sites in sequences of interest and generates printable graphical guides that facilitate assembly of TALENs. With the described platform of reagents, protocols, and software, researchers can easily engineer multiple TALENs within 2 weeks using standard cloning techniques. Curr. Protoc. Mol. Biol. 100:12.15.1‐12.15.14. © 2012 by John Wiley & Sons, Inc.
- 1 October 2012
- Published by Wiley in Current Protocols in Molecular Biology
- Vol. 100 (1) , 12.15.1-12.15.14
Open AccessEngineering Designer Transcription Activator‐‐Like Effector Nucleases (TALENs) by REAL or REAL‐Fast Assembly
Engineered transcription activator–like effector nucleases (TALENs) are broadly useful tools for performing targeted genome editing in a wide variety of organisms and cell types including plants, zebrafish, C. elegans, rat, human somatic cells, and human pluripotent stem cells. Here we describe detailed protocols for the serial, hierarchical assembly of TALENs that require neither PCR nor specialized multi‐fragment ligations and that can be implemented by any laboratory. These restriction enzyme and ligation (REAL)–based protocols can be practiced using plasmid libraries and user‐friendly, Web‐based software that both identifies target sites in sequences of interest and generates printable graphical guides that facilitate assembly of TALENs. With the described platform of reagents, protocols, and software, researchers can easily engineer multiple TALENs within 2 weeks using standard cloning techniques. Curr. Protoc. Mol. Biol. 100:12.15.1‐12.15.14. © 2012 by John Wiley & Sons, Inc.
- Open Access
- 7 June 2012
- Published by Oxford University Press (OUP) in Nucleic Acids Research
- Vol. 40 (16) , 8001-8010
Highly efficient generation of heritable zebrafish gene mutations using homo- and heterodimeric TALENs
Transcription activator-like effector nucleases (TALENs) are powerful new research tools that enable targeted gene disruption in a wide variety of model organisms. Recent work has shown that TALENs can induce mutations in endogenous zebrafish genes, but to date only four genes have been altered, and larger-scale tests of the success rate, mutation efficiencies and germline transmission rates have not been described. Here, we constructed homodimeric TALENs to 10 different targets in various endogenous zebrafish genes and found that 7 nuclease pairs induced targeted indel mutations with high efficiencies ranging from 2 to 76%. We also tested obligate heterodimeric TALENs and found that these nucleases induce mutations with comparable or higher frequencies and have better toxicity profiles than their homodimeric counterparts. Importantly, mutations induced by both homodimeric and heterodimeric TALENs are passed efficiently through the germline, in some cases reaching 100% transmission. For one target gene sequence, we observed substantially reduced mutagenesis efficiency for a variant site bearing two mismatched nucleotides, raising the possibility that TALENs might be used to perform allele-specific gene disruption. Our results suggest that construction of one to two heterodimeric TALEN pairs for any given gene will, in most cases, enable researchers to rapidly generate knockout zebrafish.
- 7 June 2012
- Published by Oxford University Press (OUP) in Nucleic Acids Research
- Vol. 40 (16) , 8001-8010
Open AccessHighly efficient generation of heritable zebrafish gene mutations using homo- and heterodimeric TALENs
Transcription activator-like effector nucleases (TALENs) are powerful new research tools that enable targeted gene disruption in a wide variety of model organisms. Recent work has shown that TALENs can induce mutations in endogenous zebrafish genes, but to date only four genes have been altered, and larger-scale tests of the success rate, mutation efficiencies and germline transmission rates have not been described. Here, we constructed homodimeric TALENs to 10 different targets in various endogenous zebrafish genes and found that 7 nuclease pairs induced targeted indel mutations with high efficiencies ranging from 2 to 76%. We also tested obligate heterodimeric TALENs and found that these nucleases induce mutations with comparable or higher frequencies and have better toxicity profiles than their homodimeric counterparts. Importantly, mutations induced by both homodimeric and heterodimeric TALENs are passed efficiently through the germline, in some cases reaching 100% transmission. For one target gene sequence, we observed substantially reduced mutagenesis efficiency for a variant site bearing two mismatched nucleotides, raising the possibility that TALENs might be used to perform allele-specific gene disruption. Our results suggest that construction of one to two heterodimeric TALEN pairs for any given gene will, in most cases, enable researchers to rapidly generate knockout zebrafish.
- 1 May 2012
- Published by Springer Nature in Science-Business eXchange
- Vol. 5 (18) , 479
High throughput synthesis of transcription activator–like effector nucleases (TALENs)
- 1 May 2012
- Published by Springer Nature in Science-Business eXchange
- Vol. 5 (18) , 479
High throughput synthesis of transcription activator–like effector nucleases (TALENs)
- Top Cited PapersOpen Access
- 8 April 2012
- Published by Springer Nature in Nature Biotechnology
- Vol. 30 (5) , 460-465
FLASH assembly of TALENs for high-throughput genome editing
Transcription activator–like effector nucleases (TALENs) enable genetic modification at specific sites in a genome. Reyon et al. present a method for high-throughput generation of TALENs, facilitating large-scale genome engineering. Engineered transcription activator–like effector nucleases (TALENs) have shown promise as facile and broadly applicable genome editing tools. However, no publicly available high-throughput method for constructing TALENs has been published, and large-scale assessments of the success rate and targeting range of the technology remain lacking. Here we describe the fast ligation-based automatable solid-phase high-throughput (FLASH) system, a rapid and cost-effective method for large-scale assembly of TALENs. We tested 48 FLASH-assembled TALEN pairs in a human cell–based EGFP reporter system and found that all 48 possessed efficient gene-modification activities. We also used FLASH to assemble TALENs for 96 endogenous human genes implicated in cancer and/or epigenetic regulation and found that 84 pairs were able to efficiently introduce targeted alterations. Our results establish the robustness of TALEN technology and demonstrate that FLASH facilitates high-throughput genome editing at a scale not currently possible with other genome modification technologies.
- 8 April 2012
- Published by Springer Nature in Nature Biotechnology
- Vol. 30 (5) , 460-465
Top Cited PapersOpen AccessFLASH assembly of TALENs for high-throughput genome editing
Transcription activator–like effector nucleases (TALENs) enable genetic modification at specific sites in a genome. Reyon et al. present a method for high-throughput generation of TALENs, facilitating large-scale genome engineering. Engineered transcription activator–like effector nucleases (TALENs) have shown promise as facile and broadly applicable genome editing tools. However, no publicly available high-throughput method for constructing TALENs has been published, and large-scale assessments of the success rate and targeting range of the technology remain lacking. Here we describe the fast ligation-based automatable solid-phase high-throughput (FLASH) system, a rapid and cost-effective method for large-scale assembly of TALENs. We tested 48 FLASH-assembled TALEN pairs in a human cell–based EGFP reporter system and found that all 48 possessed efficient gene-modification activities. We also used FLASH to assemble TALENs for 96 endogenous human genes implicated in cancer and/or epigenetic regulation and found that 84 pairs were able to efficiently introduce targeted alterations. Our results establish the robustness of TALEN technology and demonstrate that FLASH facilitates high-throughput genome editing at a scale not currently possible with other genome modification technologies.
- Open Access
- 28 January 2011
- Published by Springer Nature in BMC Genomics
- Vol. 12 (1) , 83
ZFNGenome: A comprehensive resource for locating zinc finger nuclease target sites in model organisms
Zinc Finger Nucleases (ZFNs) have tremendous potential as tools to facilitate genomic modifications, such as precise gene knockouts or gene replacements by homologous recombination. ZFNs can be used to advance both basic research and clinical applications, including gene therapy. Recently, the ability to engineer ZFNs that target any desired genomic DNA sequence with high fidelity has improved significantly with the introduction of rapid, robust, and publicly available techniques for ZFN design such as the Oligomerized Pool ENgineering (OPEN) method. The motivation for this study is to make resources for genome modifications using OPEN-generated ZFNs more accessible to researchers by creating a user-friendly interface that identifies and provides quality scores for all potential ZFN target sites in the complete genomes of several model organisms.
- 28 January 2011
- Published by Springer Nature in BMC Genomics
- Vol. 12 (1) , 83
Open AccessZFNGenome: A comprehensive resource for locating zinc finger nuclease target sites in model organisms
Zinc Finger Nucleases (ZFNs) have tremendous potential as tools to facilitate genomic modifications, such as precise gene knockouts or gene replacements by homologous recombination. ZFNs can be used to advance both basic research and clinical applications, including gene therapy. Recently, the ability to engineer ZFNs that target any desired genomic DNA sequence with high fidelity has improved significantly with the introduction of rapid, robust, and publicly available techniques for ZFN design such as the Oligomerized Pool ENgineering (OPEN) method. The motivation for this study is to make resources for genome modifications using OPEN-generated ZFNs more accessible to researchers by creating a user-friendly interface that identifies and provides quality scores for all potential ZFN target sites in the complete genomes of several model organisms.
- Open Access
- 2 November 2010
- Published by Springer Nature in BMC Bioinformatics
- Vol. 11 (1) , 1-11
Predicting success of oligomerized pool engineering (OPEN) for zinc finger target site sequences
Precise and efficient methods for gene targeting are critical for detailed functional analysis of genomes and regulatory networks and for potentially improving the efficacy and safety of gene therapies. Oligomerized Pool ENgineering (OPEN) is a recently developed method for engineering C2H2 zinc finger proteins (ZFPs) designed to bind specific DNA sequences with high affinity and specificity in vivo. Because generation of ZFPs using OPEN requires considerable effort, a computational method for identifying the sites in any given gene that are most likely to be successfully targeted by this method is desirable. Analysis of the base composition of experimentally validated ZFP target sites identified important constraints on the DNA sequence space that can be effectively targeted using OPEN. Using alternate encodings to represent ZFP target sites, we implemented Naïve Bayes and Support Vector Machine classifiers capable of distinguishing "active" targets, i.e., ZFP binding sites that can be targeted with a high rate of success, from those that are "inactive" or poor targets for ZFPs generated using current OPEN technologies. When evaluated using leave-one-out cross-validation on a dataset of 135 experimentally validated ZFP target sites, the best Naïve Bayes classifier, designated ZiFOpT, achieved overall accuracy of 87% and specificity+ of 90%, with an ROC AUC of 0.89. When challenged with a completely independent test set of 140 newly validated ZFP target sites, ZiFOpT performance was comparable in terms of overall accuracy (88%) and specificity+ (92%), but with reduced ROC AUC (0.77). Users can rank potentially active ZFP target sites using a confidence score derived from the posterior probability returned by ZiFOpT. ZiFOpT, a machine learning classifier trained to identify DNA sequences amenable for targeting by OPEN-generated zinc finger arrays, can guide users to target sites that are most likely to function successfully in vivo, substantially reducing the experimental effort required. ZiFOpT is freely available and incorporated in the Zinc Finger Targeter web server ( http://bindr.gdcb.iastate.edu/ZiFiT ).
- 2 November 2010
- Published by Springer Nature in BMC Bioinformatics
- Vol. 11 (1) , 1-11
Open AccessPredicting success of oligomerized pool engineering (OPEN) for zinc finger target site sequences
Precise and efficient methods for gene targeting are critical for detailed functional analysis of genomes and regulatory networks and for potentially improving the efficacy and safety of gene therapies. Oligomerized Pool ENgineering (OPEN) is a recently developed method for engineering C2H2 zinc finger proteins (ZFPs) designed to bind specific DNA sequences with high affinity and specificity in vivo. Because generation of ZFPs using OPEN requires considerable effort, a computational method for identifying the sites in any given gene that are most likely to be successfully targeted by this method is desirable. Analysis of the base composition of experimentally validated ZFP target sites identified important constraints on the DNA sequence space that can be effectively targeted using OPEN. Using alternate encodings to represent ZFP target sites, we implemented Naïve Bayes and Support Vector Machine classifiers capable of distinguishing "active" targets, i.e., ZFP binding sites that can be targeted with a high rate of success, from those that are "inactive" or poor targets for ZFPs generated using current OPEN technologies. When evaluated using leave-one-out cross-validation on a dataset of 135 experimentally validated ZFP target sites, the best Naïve Bayes classifier, designated ZiFOpT, achieved overall accuracy of 87% and specificity+ of 90%, with an ROC AUC of 0.89. When challenged with a completely independent test set of 140 newly validated ZFP target sites, ZiFOpT performance was comparable in terms of overall accuracy (88%) and specificity+ (92%), but with reduced ROC AUC (0.77). Users can rank potentially active ZFP target sites using a confidence score derived from the posterior probability returned by ZiFOpT. ZiFOpT, a machine learning classifier trained to identify DNA sequences amenable for targeting by OPEN-generated zinc finger arrays, can guide users to target sites that are most likely to function successfully in vivo, substantially reducing the experimental effort required. ZiFOpT is freely available and incorporated in the Zinc Finger Targeter web server ( http://bindr.gdcb.iastate.edu/ZiFiT ).
- Open Access
- 30 April 2010
- Published by Oxford University Press (OUP) in Nucleic Acids Research
- Vol. 38 (Web Server) , W462-W468
ZiFiT (Zinc Finger Targeter): an updated zinc finger engineering tool
ZiFiT (Zinc Finger Targeter) is a simple and intuitive web-based tool that provides an interface to identify potential binding sites for engineered zinc finger proteins (ZFPs) in user-supplied DNA sequences. In this updated version, ZiFiT identifies potential sites for ZFPs made by both the modular assembly and OPEN engineering methods. In addition, ZiFiT now integrates additional tools and resources including scoring schemes for modular assembly, an interface with the Zinc Finger Database (ZiFDB) of engineered ZFPs, and direct querying of NCBI BLAST servers for identifying potential off-target sites within a host genome. Taken together, these features facilitate design of ZFPs using reagents made available to the academic research community by the Zinc Finger Consortium. ZiFiT is freely available on the web without registration at http://bindr.gdcb.iastate.edu/ZiFiT/.
- 30 April 2010
- Published by Oxford University Press (OUP) in Nucleic Acids Research
- Vol. 38 (Web Server) , W462-W468
Open AccessZiFiT (Zinc Finger Targeter): an updated zinc finger engineering tool
ZiFiT (Zinc Finger Targeter) is a simple and intuitive web-based tool that provides an interface to identify potential binding sites for engineered zinc finger proteins (ZFPs) in user-supplied DNA sequences. In this updated version, ZiFiT identifies potential sites for ZFPs made by both the modular assembly and OPEN engineering methods. In addition, ZiFiT now integrates additional tools and resources including scoring schemes for modular assembly, an interface with the Zinc Finger Database (ZiFDB) of engineered ZFPs, and direct querying of NCBI BLAST servers for identifying potential off-target sites within a host genome. Taken together, these features facilitate design of ZFPs using reagents made available to the academic research community by the Zinc Finger Consortium. ZiFiT is freely available on the web without registration at http://bindr.gdcb.iastate.edu/ZiFiT/.