DADavid D. Aronsson

David D. Aronsson

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


David D. Aronsson has a total of 15 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Percutaneous epiphysiodesis using transphyseal screws for limb-length discrepancies: High variability among growth predictor models

    by Bryan C. Monier, David D. Aronsson, Michael Sun

    Purpose: Percutaneous epiphysiodesis using transphyseal screws (PETS) was developed as a minimally invasive outpatient procedure to address limb-length discrepancy (LLD) that allowed immediate postoperative weight bearing and was potentially reversible by removing the screws. The aims of our study were to report our results using PETS for LLD and evaluate the accuracy of three growth predictor models. Methods: Sixteen patients with an average age of 14 years were treated for LLD using PETS. Thirteen patients had screws inserted in a parallel fashion and 3 had crossed screws. We compared the predicted LLD at skeletal maturity using the three growth predictor methods with the actual LLD at skeletal maturity and preoperative LLD with the final LLD at skeletal maturity. Results: The mean LLD at skeletal maturity between the predicted and final measurements was 0.2 cm using the Green−Anderson method, 1.4 cm using the Moseley method, and −0.1 cm using the Paley method. The mean preoperative LLD of 3.1 cm was corrected to 1.7 cm at skeletal maturity ( p < 0.001). Six patients complained of pain over the screw heads; however, no patient developed an infection or angular deformity. Conclusions: The three growth predictor methods predicted the final LLD within an average of 1.4 cm, but there was high variability. Although PETS improved the LLD by a mean of 1.4 cm, we believe the results would have been better if PETS was performed at an earlier skeletal age.


  • Contributions of Remodeling and Asymmetrical Growth to Vertebral Wedging in a Scoliosis Model

    by David D. Aronsson, Ian A.F. Stokes, Carole A. McBride

    We performed a laboratory study of rats of 3 different ages with imposed angulation and compressive loading to caudal vertebrae to determine causes of vertebral wedging. The purpose was to determine the percentage of total vertebral wedging that was caused by asymmetric growth, vertebral body, and epiphyseal wedging. Approval from the Institutional Animal Care and Use Committee, the University of Vermont, was obtained for the live animal procedures used in this study. Vertebral wedging from asymmetrical growth (Hueter-Volkmann law) is reported to cause vertebral wedging in scoliosis with little attention to the possible contribution of bony remodeling (Wolff's law). In our study, an external fixator imposed a 30° lateral curvature and compression of 0.1 megapascal (MPa) in 5- and 14-week-old animals (Groups 1 and 2) and 0.2 MPa in 14- and 32-week-old animals (groups 3 and 4). Total vertebral wedging was measured from micro CT scans. Wedging due to asymmetrical growth and epiphyseal remodeling was calculated from fluorescent labels and the difference was attributed to vertebral body wedging. Total vertebral wedging averaged 18°, 6°, 10° and 5° in Groups 1, 2, 3, and 4, respectively. Metaphyseal asymmetrical growth averaged 8°, 1°, 4°, 0° (44%, 17%, 40% and 0% of total). Epiphyseal wedging averaged 9°, 0°, 3°, and -1°. The difference (vertebral body) averaged 1°, 5°, 3°, and 7° (6%, 83%, 30% and 140% of total). The growth of the loaded vertebrae as a percentage of control vertebrae was 56%, 39% and 25% in Groups 1, 2 and 3; negligible in Group 4. Vertebral body cortical remodeling, with increased thickness and increased curvature on the concave side was evident in young animals and 0.2 MPa loaded older animals. We conclude that asymmetrical growth was the largest contributor to vertebral wedging in young animals; vertebral body remodeling was the largest contributor in older animals. If, conversely, vertebral wedging can be corrected by appropriate loading in young and old animals, it has important implications for the nonfusion treatment of scoliosis.


  • Ankle Fractures in Children

    by Ethan W. Blackburn, David D. Aronsson, James H. Rubright, Jennifer W. Lisle

    Computed tomography is useful for preoperative planning and postreduction assessment for intra-articular pediatric ankle fractures. Nondisplaced pediatric ankle fractures can be effectively managed with cast immobilization and close radiographic follow-up evaluation. Physeal ankle injuries in younger children with considerable growth remaining should be followed closely for at least one year after injury as growth arrest may result in substantial angular deformity. Open reduction and internal fixation should be strongly considered when an articular step-off of <2 mm cannot be maintained by closed means for Salter-Harris type-III and IV and transitional ankle fractures.


  • Nonfusion Treatment of Adolescent Idiopathic Scoliosis by Growth Modulation and Remodeling

    by David D. Aronsson, Ian A.F. Stokes

    Background Adolescent idiopathic scoliosis (AIS) is a common disorder in which the spine gradually develops a curvature that is first detected in patients between 11 and 17 years of age. The only accepted treatment methods are bracing and surgery. Whether brace treatment alters the natural history is being questioned, and patient compliance is low. Surgery usually includes a spinal fusion that creates a rigid spine and concentrates stresses at the ends. Methods This study focuses on correlating the laboratory results with clinical reports for treating patients with AIS. In the laboratory, scoliosis with vertebral wedging has been created by asymmetric mechanical loading and has been corrected by reversing the loading. In the clinic, bracing and derotational casting have been successful in some reports, but compliance has been a problem with bracing and derotational casts have mainly been used in young children. Operative treatment has been successful, but a nonfusion operation remains elusive. Findings and Results In the laboratory, axial loading of growth plates altered growth according to the Hueter-Volkmann law, which states that compression decreases and distraction increases growth. Asymmetric loading of the spine caused asymmetric growth resulting in scoliosis with vertebral wedging. Asymmetric loading of tail vertebrae created vertebral wedging according to Wolff's law, which states that the bone remodels over time in response to prevailing mechanical demands. In the clinic, studies have shown that bracing may work if patients wore the brace as prescribed. Derotational casting in young children has been shown to prevent progression and even correct the scoliosis in some patients. Convex vertebral stapling has been successful in mild curves, but the results in larger curves have been disappointing. Anterolateral tethering has been successful in mild curves in young patients, but there is limited experience with this technique in patients with large curves. Conclusions A brace that applies the appropriate loading and is worn as prescribed may dramatically improve the results of brace treatment. A procedure using external fixation or adjustable anterolateral tethering may achieve a nonfusion correction of AIS. Level of Evidence Level II.


    • 1 January 2010
      • Vol. 158, 11-5

    The role of remodeling and asymmetric growth in vertebral wedging.

    by David D Aronsson, Ian A Stokes, Carole McBride

    Scoliosis with vertebral wedging is thought to be caused by asymmetric growth (Hueter-Volkmann law), but vertebral diaphyseal remodeling (Wolff's law) may also contribute to the deformity. We investigated whether vertebral wedging in scoliosis might involve both mechanisms. An external fixator was used to impose a 30 degrees scoliosis and compression of 0.1 or 0.2 MPa to the tails of 10 5-week-old and 20 14-week-old Sprague-Dawley rats for 6 weeks. The rats were divided into three groups of 10 animals each: Group 1: 5-week-old animals with 0.1 MPa compression; Group 2: 14-week-old animals with 0.1 MPa compression; Group 3: 14-week-old animals with 0.2 MPa compression. Vertebral wedging and diaphyseal curvature were measured from micro CT scans performed at weeks 1, 3, and 6. Wedging due to asymmetrical growth and remodeling was calculated from a Calcein label administered at week 3 and a Xylenol label at week 6. The growth rate of the loaded vertebrae as a per cent of control vertebrae was 60% in Group 1, 40% in Group 2, and 30% in Group 3. The growth rate of control vertebrae in 14-week-old animals was 16% that of 5-week-old animals. The animals in all 3 groups developed a scoliosis with vertebral wedging that averaged 18.7 degrees in Group 1, 8.2 degrees in Group 2, and 10.1 degrees in Group 3. Asymmetric growth was much greater in Group 1 (5-week-old) animals. The ossified epiphyses became wedged and diaphyseal remodeling occurred in all groups. The major contribution to the vertebral wedging was asymmetric growth in the 5-week-old animals and diaphyseal remodeling in the 14-week-old animals. The results support the concept that if appropriate loads can be applied to human vertebrae through minimally invasive techniques, scoliosis and vertebral wedging can be corrected without a spinal fusion in both adolescents and adults.


    • 1 January 2006
      • Vol. 123, 182-7

    Intervertebral disc adaptation to wedging deformation.

    by Ian A F Stokes, David D Aronsson, Katherine C Clark, Maria L Roemhildt

    Although scoliosis includes wedge deformities of both vertebrae and discs, little is known about the causes of the discal changes, and whether they result from mechanical influences on growth and/or remodelling. An external apparatus attached to transvertebral pins applied compression and 15 degrees of angulation to each of two adjacent young rat caudal intervertebral discs for 5 weeks (four animals), or for 10 weeks (four animals). Each week, micro-CT scanning documented the in vivo discal wedging. After euthanasia, tail segments (three vertebrae and the 2 angulated discs) were excised and their flexibility was measured over a range of lateral bending. The angle of maximum flexibility was recorded. Then discs were fixed in situ (with the external apparatus in place) and sectioned for polarized light microscopy. The disc-wedging deformity averaged 15 degrees initially, it averaged 20 degrees after 5 weeks, and then reduced to 10 degrees (in 10 week animals). The lateral bending flexibility showed a distinct maximum at an average of 1.1 degrees from the in vivo position in the 5-week animals, indicating structural remodeling of the discs almost to the deformed geometry. The 10-week animals had maximum flexibility at 1.4 degrees from the in vivo position (no significant difference between 5 and 10-week animals.) Collagen crimp angles [Cassidy et al., Conn Tiss Res 1989, 23:75-88] were not significantly different between convex and concave sides, again suggesting that remodeling had occurred. In a mechanically induced scoliosis deformity in skeletally immature rats, the intervertebral discs underwent remodeling within 5 weeks. This indicates that this animal model is suitable for studying adaptive wedging changes in human scoliosis.


    • 1 January 2002
      • Vol. 88, 149-52

    Rule-based algorithm for automated King-type classification of idiopathic scoliosis.

    by Ian A F Stokes, David D Aronsson

    Recent studies have demonstrated poor reliability of the King et al. classification of idiopathic scoliosis. The purpose of the present work was to determine whether the reliability of the King classification would be improved by employing unambiguous rules for classification encoded in a computer program. Thus the only possible source of variability in classifying a given radiograph would be variable landmark identification on the radiograph. Coordinates of the four comers of each thoracic and lumbar vertebra were obtained by digitizing radiographs, using the central sacral line to define the y-axis. A computer algorithm located curve apices as the most laterally deviated vertebra in a range of two above to two below a change in the sign of vertebral tilt. End vertebrae of each curve were located as those with the greatest tilt of the superior (proximal end vertebra) or inferior (distal end vertebra). In a lumbar curve, the apical vertebra was defined as 'crossing the midline' if all four corners laid on one side of the vertical central sacral line. Curves were defined as in Table I in King et al., except that curve flexibility data were not used. The algorithm was verified on the five examples in King et al. It then classified the six examples in Lenke et al. and Cummings et al. which were classified unreliably by human observers. The algorithm was also tested on 33 radiographs of 17 patients with AIS, 8 radiographs were repeat marked by two observers. The algorithm overcame accuracy and reliability problems, except in rare cases when it was borderline whether or not a lumbar curve crossed the midline, when the apex level was ambiguous, or when a Cobb angle was close to 10 degrees.


    • 1 January 2002
      • Vol. 88, 378-81

    Growth plate chondrocyte enlargement modulated by mechanical loading.

    by Ian A Stokes, Peter L Mente, James C Iatridis, Cornelia E Farnum, David D Aronsson

    Mechanical compression and distraction forces are known to modulate growth in vertebral growth plates, and are implicated in the progression of scoliosis. The amount of cellular enlargement is thought to be a key variable correlating with differing growth at different anatomical sites. This work tested the hypothesis that growth differences produced by mechanical loading are associated with alterations in the amount of cell height increase in the growth direction. Compression force (3 animals) or distraction force (4 animals) of 60% bodyweight was maintained on a caudal vertebra of growing rats with an external apparatus attached to vertebrae adjacent to the experimental level via transfixing pins. Growth of loaded and control vertebrae was measured from weekly radiographs. After four weeks, animals were euthanized and the loaded vertebrae and adjacent control vertebrae were excised for histological sections from which the following were measured: height of the hypertrophic zone (the average separation between boundaries of the zone); Mean Hypertrophic chondrocytic height; slope of the linear regression of cell height vs. position in the zone, (the amount of cell enlargement). Distracted and compressed vertebra growth averaged 110% and 53% of control levels. The percentage changes in the measures of chondrocyte dimensions, relative to control values, were smaller than the percentage changes in growth velocity. Also, the effects were of smaller magnitude for distracted vertebrae than for compressed vertebrae. Growth plate zonal height, slope and mean cell height all correlated significantly (p<0.05) with growth rate (expressed as a percentage of control) (Pearson r = 0.69, 0.37 and 0.41 respectively. Thus mechanical loading of tail vertebrae modulated their growth rate, that in turn correlated with changes in the amount of hypertrophic chondrocyte height increase. The effects for compression were greater than for distraction.


    • 1 January 2002
      • Vol. 91, 97-100

    Mechanical modulation of vertebral and tibial growth: diurnal versus full-time loading.

    by Ian Stokes, Jodie Gwadera, Abigail Dimock, David D Aronsson

    The aim of this study was to determine whether the amount of growth response to mechanical compression and the underlying mechanism differed with night-time or day-time loading, relative to full time loading. Mechanical compression (nominally 0.1 MPa stress) was applied across tibial and tail vertebral growth plates of growing Sprague-Dawley rats. Four groups of animals were tested: 24/24 hour (full-time loading); 12/24 hour (day-loading); 12/24 hour (night-loading); and 0/24 hour (sham instrumented), 4 or 5 animals per group. After 8 days animals were euthanized and the growth plates were processed for quantitative histology of loaded and within-animal control growth plates to measure 24-hour growth, total and BrdU-positive proliferative zone chondrocyte counts, and hypertrophic chondrocyte enlargement in the growth direction. Growth as a percentage of within-animal control averaged 82% (full-time); 93% (day-loading); 90% (night-loading); 100% (sham) for vertebrae. For proximal tibiae it averaged 70% (full-time); 84% (day-loading); 86% (night-loading); 89% (sham). Reduced amount of hypertrophic chondrocytic enlargement explained about half of this effect in full-time compressed growth plates, but was not significantly altered in half-time loaded growth plates. The remaining variation in growth was apparently explained by reduced total numbers of proliferative zone chondrocytes. The BrdU labeling index demonstrated an opposite trend, which was not statistically significant. In half-time loaded growth plates the proliferative zone cell count change predominated.