TBThomas K. Berger

Thomas K. Berger

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Thomas K. Berger has a total of 16 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Gyroid porous inserts as a novel flow control to mitigate tip vortex cavitation

    by Thomas Berger, Mohamed Farhat

    Tip vortices generated at the tip of lifting surfaces pose significant challenges in fluid dynamics, causing induced drag, noise, and cavitation erosion risk across aerospace and hydraulic applications. Among the various mitigation strategies, porous tips have been explored with mixed results, showing limited effectiveness in diffusing concentrated vorticity. In this study, we introduce a gyroid-based porous tip as a novel passive flow control device for tip vortex mitigation. A gyroid is a triply periodic minimal surface that forms a smooth and tortuous porous 3D network. A gyroid-based porous insert was attached to an elliptical NACA 16-020 hydrofoil tip (Re ≈ 9 × 10 5 ), replacing 3%, 5%, and 9% of the span. Laser Doppler Velocimetry (LDV) measurements revealed that increasing the gyroid portion dramatically reduces maximum tangential velocity while enlarging the vortex core radius. The vortex circulation remains unchanged, indicating a diffusion mechanism that spreads concentrated vorticity over a larger core. At 12° incidence, the 9% gyroid insert reduced peak tangential velocity by a factor of 3.2 alongside a sixfold increase in vortex core radius. Consequently, the minimum pressure coefficient at the vortex center increased from $$-1.4$$ - 1.4 to $$-0.1$$ - 0.1 , reducing significantly the risk of cavitation. Flow visualization confirmed complete suppression of tip vortex cavitation across all tested conditions. The gyroid effectiveness was verified for both tripped and natural boundary layer transitions. Critically, hydrodynamic performance remained essentially unaffected for gyroid inserts spanning up to 5%, with lift and drag coefficients maintained within experimental uncertainty. Tests with blocked permeability demonstrate that the observed effects stem from structural permeability rather than surface roughness. These findings establish gyroid inserts as a promising passive flow control for cavitation mitigation in marine propellers, hydrofoils, and turbomachinery, as well as noise control in aircraft wings and wind turbines, while preserving operational efficiency.


  • Open Access

    Vortex shedding from a composite hydrofoil: Experimental evidence of a novel “partial lock-in”

    by Yunqing Liu, Thomas A. N. Berger, Biao Huang, Qin Wu, Mohamed Farhat

    Lock-in is of great importance in many engineering applications due to its practical implications for structural safety. The influence of composite bend-twist coupling on the wake dynamics and vortex-induced vibration around a carbon fiber composite hydrofoil is investigated and compared to a similar stainless-steel hydrofoil. Experiments are conducted by varying linearly and slowly the upstream velocity back and forth between 5 and 15 m/s, which allows reaching lock-in conditions for both hydrofoils. Due to the blunt truncation of the trailing edge, both hydrofoils produce strong and alternate vortices in their wake, whose effect is visible on vibration spectrograms. The steel hydrofoil produces a classical lock-in onto its first torsion mode, while the composite hydrofoil exhibits two lock-in phenomena onto both torsion and second bending modes. Interestingly, for the second bending mode, the vibration spectrogram reveals the existence of two frequencies: (i) the resonance frequency, which remains almost constant during the lock-in phase, and (ii) the Strouhal frequency, which increases linearly with the upstream velocity. Using flow visualization, we found that this peculiar behavior is the result of the twist-bending coupling, which leads to the co-existence of two different vortex-shedding mechanisms. Close to the hydrofoil tip, the large vibration amplitude dictates the shedding frequency while the shedding follows the Strouhal law elsewhere. This partial lock-in gradually fades away as the velocity is increased. This result provides guidance for the safe design of composite structures.


  • Frequency‐dependent disynaptic inhibition in the pyramidal network: a ubiquitous pathway in the developing rat neocortex

    by Thomas K. Berger, Rodrigo Perin, Gilad Silberberg, Henry Markram

    The general structure of the mammalian neocortex is remarkably similar across different cortical areas. Despite certain cytoarchitectural specializations and deviations from the general blueprint, the principal organization of the neocortex is relatively uniform. It is not known, however, to what extent stereotypic synaptic pathways resemble each other between cortical areas, and how far they might reflect possible functional uniformity or specialization. Here, we show that frequency‐dependent disynaptic inhibition (FDDI) is a generic circuit motif that is present in all neocortical areas we investigated (primary somatosensory, auditory and motor cortex, secondary visual cortex and medial prefrontal cortex of the developing rat). We did find, however, area‐specific differences in occurrence and kinetics of FDDI and the short‐term dynamics of monosynaptic connections between pyramidal cells (PCs). Connectivity between PCs, both monosynaptic and via FDDI, is higher in primary cortices. The long‐term effectiveness of FDDI is likely to be limited by an activity‐dependent attenuation of the PC–interneuron synaptic transmission. Our results suggest that the basic construction of neocortical synaptic pathways follows principles that are independent of modality or hierarchical order within the neocortex.


  • Evaluating automated parameter constraining procedures of neuron models by experimental and surrogate data

    by Shaul Druckmann, Thomas K. Berger, Sean Hill, Felix Schürmann, Henry Markram, Idan Segev

    Neuron models, in particular conductance-based compartmental models, often have numerous parameters that cannot be directly determined experimentally and must be constrained by an optimization procedure. A common practice in evaluating the utility of such procedures is using a previously developed model to generate surrogate data (e.g., traces of spikes following step current pulses) and then challenging the algorithm to recover the original parameters (e.g., the value of maximal ion channel conductances) that were used to generate the data. In this fashion, the success or failure of the model fitting procedure to find the original parameters can be easily determined. Here we show that some model fitting procedures that provide an excellent fit in the case of such model-to-model comparisons provide ill-balanced results when applied to experimental data. The main reason is that surrogate and experimental data test different aspects of the algorithm’s function. When considering model-generated surrogate data, the algorithm is required to locate a perfect solution that is known to exist. In contrast, when considering experimental target data, there is no guarantee that a perfect solution is part of the search space. In this case, the optimization procedure must rank all imperfect approximations and ultimately select the best approximation. This aspect is not tested at all when considering surrogate data since at least one perfect solution is known to exist (the original parameters) making all approximations unnecessary. Furthermore, we demonstrate that distance functions based on extracting a set of features from the target data (such as time-to-first-spike, spike width, spike frequency, etc.)—rather than using the original data (e.g., the whole spike trace) as the target for fitting—are capable of finding imperfect solutions that are good approximations of the experimental data.


  • The quantitative single-neuron modeling competition

    by Renaud Jolivet, Felix Schürmann, Thomas K. Berger, Richard Naud, Wulfram Gerstner, Arnd Roth

    As large-scale, detailed network modeling projects are flourishing in the field of computational neuroscience, it is more and more important to design single neuron models that not only capture qualitative features of real neurons but are quantitatively accurate in silico representations of those. Recent years have seen substantial effort being put in the development of algorithms for the systematic evaluation and optimization of neuron models with respect to electrophysiological data. It is however difficult to compare these methods because of the lack of appropriate benchmark tests. Here, we describe one such effort of providing the community with a standardized set of tests to quantify the performances of single neuron models. Our effort takes the form of a yearly challenge similar to the ones which have been present in the machine learning community for some time. This paper gives an account of the first two challenges which took place in 2007 and 2008 and discusses future directions. The results of the competition suggest that best performance on data obtained from single or double electrode current or conductance injection is achieved by models that combine features of standard leaky integrate-and-fire models with a second variable reflecting adaptation, refractoriness, or a dynamic threshold.