Nam-Ju Jo
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Nam-Ju Jo has a total of 76 co-authors. Here are the top co-authors by number of shared publications:
- Chang-Sik Ha
Department of Polymer Science and Engineering, Pusan National University, Busan 46241, Republic of Korea
3 shared publications - Hyun Park
Department of Naval Architecture and Ocean Engineering Pusan National University Busan Republic of Korea
3 shared publications Jin Hyok Lee
3 shared publicationsJong Woo Bae
3 shared publicationsHo-Hwan Chun
Advanced Ship Engineering Research Center, Pusan National University, Busan, Republic of Korea
2 shared publications- Saravanan Nagappan
Department of Chemistry, Chemistry Institute for Functional Materials, Pusan National University, 2 Busandaehak-ro 63beon-gil, Geumjeong-Gu, Busan 46241, Republic of Korea
2 shared publications
Latest Publications
- Open Access
Preventing the Collapse Behavior of Polyurethane Foams with the Addition of Cellulose Nanofiber
Polyurethane foam manufacturing depends on its materials and processes. A polyol that contains primary alcohol is very reactive with isocyanate. Sometimes, this may cause unexpected problems. In this study, a semi-rigid polyurethane foam was fabricated; however, its collapse occurred. The cellulose nanofiber was fabricated to solve this problem, and a weight ratio of 0.25, 0.5, 1, and 3% (based on total parts per weight of polyols) of the nanofiber was added to the polyurethane foams. The effect of the cellulose nanofiber on the polyurethane foams’ rheological, chemical, morphological, thermal, and anti-collapse performances was analyzed. The rheological analysis showed that 3 wt% of the cellulose nanofiber was unsuitable because of the aggregation of the filler. It was observed that the addition of the cellulose nanofiber showed the improved hydrogen bonding of the urethane linkage, even if it was not chemically reacted with the isocyanate groups. Moreover, due to the nucleating effect of the cellulose nanofiber, the average cell area of the produced foams decreased according to the amount of the cellulose nanofiber present, and the average cell area especially was reduced about five times when it contained 1 wt% more of the cellulose nanofiber than the neat foam. Although the thermal stability declined slightly, the glass transition temperature shifted from 25.8 °C to 37.6, 38.2, and 40.1 °C by when the cellulose nanofiber increased. Furthermore, the shrinkage ratio after 14 days from the foaming (%shrinkage) of the polyurethane foams decreased 15.4 times for the 1 wt% cellulose nanofiber polyurethane composite.
Open AccessPreventing the Collapse Behavior of Polyurethane Foams with the Addition of Cellulose Nanofiber
Polyurethane foam manufacturing depends on its materials and processes. A polyol that contains primary alcohol is very reactive with isocyanate. Sometimes, this may cause unexpected problems. In this study, a semi-rigid polyurethane foam was fabricated; however, its collapse occurred. The cellulose nanofiber was fabricated to solve this problem, and a weight ratio of 0.25, 0.5, 1, and 3% (based on total parts per weight of polyols) of the nanofiber was added to the polyurethane foams. The effect of the cellulose nanofiber on the polyurethane foams’ rheological, chemical, morphological, thermal, and anti-collapse performances was analyzed. The rheological analysis showed that 3 wt% of the cellulose nanofiber was unsuitable because of the aggregation of the filler. It was observed that the addition of the cellulose nanofiber showed the improved hydrogen bonding of the urethane linkage, even if it was not chemically reacted with the isocyanate groups. Moreover, due to the nucleating effect of the cellulose nanofiber, the average cell area of the produced foams decreased according to the amount of the cellulose nanofiber present, and the average cell area especially was reduced about five times when it contained 1 wt% more of the cellulose nanofiber than the neat foam. Although the thermal stability declined slightly, the glass transition temperature shifted from 25.8 °C to 37.6, 38.2, and 40.1 °C by when the cellulose nanofiber increased. Furthermore, the shrinkage ratio after 14 days from the foaming (%shrinkage) of the polyurethane foams decreased 15.4 times for the 1 wt% cellulose nanofiber polyurethane composite.
- Open Access
- 1 February 2019
- Published by The Korean Society of Propulsion Engineers in Journal of the Korean Society of Propulsion Engineers
- Vol. 23 (1)
Study on the Degradaion Behavior of Acrylonitrile Rubber(NBR) O-ring by Intermittent CSR and Time-Temperature Superposition Principle
- 1 February 2019
- Published by The Korean Society of Propulsion Engineers in Journal of the Korean Society of Propulsion Engineers
- Vol. 23 (1)
Open AccessStudy on the Degradaion Behavior of Acrylonitrile Rubber(NBR) O-ring by Intermittent CSR and Time-Temperature Superposition Principle
- 31 January 2019
- Published by The Polymer Society of Korea in Polymer Korea
- Vol. 43 (1) , 92-98
Microencapsulation of Thermoplastic Polyurethane by Solvent Evaporation Method
고무 제조의 초기 공정인 혼련 공정에서 발생하는 열로 인한 고무의 바람직하지 않은 사전 가교를 방지하고 분산성을 높이기 위해 가황제와 가황 촉진제를 마이크로 캡슐화한다. 이후 마이크로 캡슐은 고무 제조의 후 공정인 성형 공정에서 용해되어 가황제와 가황 촉진제를 방출하게 한다. 이에 마이크로 캡슐화는 궁극적으로 고무 제품의 제조 공정의 용이성과 경제성을 개선할 수 있다. 마이크로 캡슐의 재료로는 하드 세그먼트와 소프트 세그먼트의 함량을 조절하여 원하는 융점과 기계적 강도를 얻을 수 있는 열가소성 폴리우레탄을 선택하고 용매 증발법으로 마이크로 캡슐을 제조하였다. 또 제조한 마이크로 캡슐의 열적 성질과 기계적 성질을 조사하여 혼련 공정에서 발생하는 120 ℃의 열과 13 MPa의 인장 응력을 견디고 가황온도인 150 ℃에서 녹는 시료를 선정하였으며, 실제 공정에의 적용가능성을 검토하였다.
- 31 January 2019
- Published by The Polymer Society of Korea in Polymer Korea
- Vol. 43 (1) , 92-98
Microencapsulation of Thermoplastic Polyurethane by Solvent Evaporation Method
고무 제조의 초기 공정인 혼련 공정에서 발생하는 열로 인한 고무의 바람직하지 않은 사전 가교를 방지하고 분산성을 높이기 위해 가황제와 가황 촉진제를 마이크로 캡슐화한다. 이후 마이크로 캡슐은 고무 제조의 후 공정인 성형 공정에서 용해되어 가황제와 가황 촉진제를 방출하게 한다. 이에 마이크로 캡슐화는 궁극적으로 고무 제품의 제조 공정의 용이성과 경제성을 개선할 수 있다. 마이크로 캡슐의 재료로는 하드 세그먼트와 소프트 세그먼트의 함량을 조절하여 원하는 융점과 기계적 강도를 얻을 수 있는 열가소성 폴리우레탄을 선택하고 용매 증발법으로 마이크로 캡슐을 제조하였다. 또 제조한 마이크로 캡슐의 열적 성질과 기계적 성질을 조사하여 혼련 공정에서 발생하는 120 ℃의 열과 13 MPa의 인장 응력을 견디고 가황온도인 150 ℃에서 녹는 시료를 선정하였으며, 실제 공정에의 적용가능성을 검토하였다.
- 8 May 2018
- Published by Royal Society of Chemistry (RSC) in New Journal of Chemistry
- Vol. 42 (12) , 10254-10262
Synthesis and functionalisation of mesoporous materials for transparent coatings and organic dye adsorption
Herein, we propose a facile method for the synthesis of functionalised mesoporous silica nanoparticles (MSN) via the polymerisation of N-isopropylacrylamide (NIPAM) monomer with vinyl functional mesoporous silica nanoparticles (VMSN). The structural and functional properties of the materials are analysed using various characterisation techniques. Additionally, a transparent hydrophobic glass substrate is fabricated by dispersing a certain amount of the synthesised nanoparticles in ethyl acetate (EA) followed by spin-coating on a glass substrate and drying overnight at 80 °C. In summary, the functionalised mesoporous materials can be used for multiple applications such as the preparation of stable hydrophobic, transparent, and temperature-sensitive surfaces, as well as for the adsorption of Rhodamine B dye.
- 8 May 2018
- Published by Royal Society of Chemistry (RSC) in New Journal of Chemistry
- Vol. 42 (12) , 10254-10262
Synthesis and functionalisation of mesoporous materials for transparent coatings and organic dye adsorption
Herein, we propose a facile method for the synthesis of functionalised mesoporous silica nanoparticles (MSN) via the polymerisation of N-isopropylacrylamide (NIPAM) monomer with vinyl functional mesoporous silica nanoparticles (VMSN). The structural and functional properties of the materials are analysed using various characterisation techniques. Additionally, a transparent hydrophobic glass substrate is fabricated by dispersing a certain amount of the synthesised nanoparticles in ethyl acetate (EA) followed by spin-coating on a glass substrate and drying overnight at 80 °C. In summary, the functionalised mesoporous materials can be used for multiple applications such as the preparation of stable hydrophobic, transparent, and temperature-sensitive surfaces, as well as for the adsorption of Rhodamine B dye.
- 1 March 2018
- Published by The Polymer Society of Korea in Polymer Korea
- Vol. 42 (2) , 320-329
Waterborne Polyurethane Acrylic Copolymer for Anti-Corrosion Resin
Waterbome polyurethane acrylic copolymer (WPUA) was synthesized from the poly(tetramethylene glycol) (PTMG), 4,4'-methylene bis(cyclohexyl isocyanate) (H12MDI), 2,2-dimethylol propionic acid (DMPA), and caprolactone acrylate (CLA). The synthesis of WPUA was confirmed by Fourier transform infrared spectroscopy (FTIR) and gel permeation chromatography (GPC). Dynamic light scattering (DLS), universal testing machine (UTM) and water absorption tests were performed to confirm the change of the physical properties of WPUA according to the presence of CLA and the change of molecular weight of PU prepolymer. It was confirmed that the introduction of CLA improved the tensile strength and water resistance of WPU and decreased the elongation at break.
- 1 March 2018
- Published by The Polymer Society of Korea in Polymer Korea
- Vol. 42 (2) , 320-329
Waterborne Polyurethane Acrylic Copolymer for Anti-Corrosion Resin
Waterbome polyurethane acrylic copolymer (WPUA) was synthesized from the poly(tetramethylene glycol) (PTMG), 4,4'-methylene bis(cyclohexyl isocyanate) (H12MDI), 2,2-dimethylol propionic acid (DMPA), and caprolactone acrylate (CLA). The synthesis of WPUA was confirmed by Fourier transform infrared spectroscopy (FTIR) and gel permeation chromatography (GPC). Dynamic light scattering (DLS), universal testing machine (UTM) and water absorption tests were performed to confirm the change of the physical properties of WPUA according to the presence of CLA and the change of molecular weight of PU prepolymer. It was confirmed that the introduction of CLA improved the tensile strength and water resistance of WPU and decreased the elongation at break.
- Open Access
- 30 March 2017
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 7 (31) , 19106-19116
One-pot synthesis of multi-functional magnetite–polysilsesquioxane hybrid nanoparticles for the selective Fe3+ and some heavy metal ions adsorption
Multi-functional magnetite–polysilsesquioxane (PSSQ) hybrid nanoparticles were synthesised in a one-pot approach using ferrous and ferric chlorides and various silane monomers by coprecipitation followed by a surface grafting method. The functional groups, surface properties, and thermal stability of the materials were analyzed using a range of characterisation techniques. Furthermore, the functional magnetic hybrid nanoparticles were used for the adsorption of heavy metal ions. The results suggest that the magnetic PSSQ hybrid nanoparticles have excellent adsorption and selectivity behavior for iron (Fe3+) and some heavy metal ions as individual ions or in mixtures of metal ions. The adsorption kinetics highlighted the excellent adsorption behavior of the functionalised magnetic PSSQ hybrid nanoparticles. On the other hand, the adsorption behavior depends on the type of functional groups present in the materials. These promising and highly desirable magnetic hybrid materials can be used in a wide range of applications.
- 30 March 2017
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 7 (31) , 19106-19116
Open AccessOne-pot synthesis of multi-functional magnetite–polysilsesquioxane hybrid nanoparticles for the selective Fe3+ and some heavy metal ions adsorption
Multi-functional magnetite–polysilsesquioxane (PSSQ) hybrid nanoparticles were synthesised in a one-pot approach using ferrous and ferric chlorides and various silane monomers by coprecipitation followed by a surface grafting method. The functional groups, surface properties, and thermal stability of the materials were analyzed using a range of characterisation techniques. Furthermore, the functional magnetic hybrid nanoparticles were used for the adsorption of heavy metal ions. The results suggest that the magnetic PSSQ hybrid nanoparticles have excellent adsorption and selectivity behavior for iron (Fe3+) and some heavy metal ions as individual ions or in mixtures of metal ions. The adsorption kinetics highlighted the excellent adsorption behavior of the functionalised magnetic PSSQ hybrid nanoparticles. On the other hand, the adsorption behavior depends on the type of functional groups present in the materials. These promising and highly desirable magnetic hybrid materials can be used in a wide range of applications.
- 25 April 2016
- Published by Springer Nature in Polymer Bulletin
- Vol. 73 (9) , 2485-2492
Fabrication and properties of glass cloth reinforced multifunctional acrylic polymer substrate
- 25 April 2016
- Published by Springer Nature in Polymer Bulletin
- Vol. 73 (9) , 2485-2492
Fabrication and properties of glass cloth reinforced multifunctional acrylic polymer substrate
- 30 March 2016
- Published by Taylor & Francis in Composite Interfaces
- Vol. 23 (8) , 797-805
Micellar core-shell-type acrylic-polyurethane hybrid materials with self-polishing property
Marine fouling can be a serious problem in the shipping industry, since it increases the surface roughness of the hull and hence its frictional resistance to its movement through water. Antifouling paint can be defined as preventing the attachment of marine organisms onto surfaces. However, the most commonly used antifouling coating which is the tributyltin-based self-polishing copolymer causes the severe pollution of marine environment. Ammonium salt-based paints include tertiary amines as biocides which have effective biocidal and biodegradable properties without accumulation in the sea environment. However, ammonium salt-based coatings were too sensitive to seawater and became swollen. In this study, polyurethane-acrylic copolymers were synthesized by radical polymerization. These hybrid materials were found to form core–shell structures in aqueous media. Synthesis and properties of copolymers were investigated by Fourier transform-infrared spectrometer, proton-nuclear magnetic resonance, transmission electron microscopy, and dynamic light scattering. The polishing rate of self-polishing copolymer was determined from the reduction in dry film thickness after artificial seawater immersion under a dynamic condition.
- 30 March 2016
- Published by Taylor & Francis in Composite Interfaces
- Vol. 23 (8) , 797-805
Micellar core-shell-type acrylic-polyurethane hybrid materials with self-polishing property
Marine fouling can be a serious problem in the shipping industry, since it increases the surface roughness of the hull and hence its frictional resistance to its movement through water. Antifouling paint can be defined as preventing the attachment of marine organisms onto surfaces. However, the most commonly used antifouling coating which is the tributyltin-based self-polishing copolymer causes the severe pollution of marine environment. Ammonium salt-based paints include tertiary amines as biocides which have effective biocidal and biodegradable properties without accumulation in the sea environment. However, ammonium salt-based coatings were too sensitive to seawater and became swollen. In this study, polyurethane-acrylic copolymers were synthesized by radical polymerization. These hybrid materials were found to form core–shell structures in aqueous media. Synthesis and properties of copolymers were investigated by Fourier transform-infrared spectrometer, proton-nuclear magnetic resonance, transmission electron microscopy, and dynamic light scattering. The polishing rate of self-polishing copolymer was determined from the reduction in dry film thickness after artificial seawater immersion under a dynamic condition.
- 22 November 2015
- Published by Taylor & Francis in Molecular Crystals and Liquid Crystals
- Vol. 622 (1) , 6-13
Preparation and Characterization of UV Cured Optical Films Containing a Fluorene Compound
In this study, the high refractive coating films applicable for optical materials were produced. the conversion and the photo curing behaviors were examined through FTIR-ATR and photo-DSC, and thermal and mechanical properties of cured films were examined by using DMA and UTM, and pencil hardness, refractive index and optical transmittance of film were measured. Urethane metacrylate oligomer was synthesized by mixing bisphenoxyethanolfluorene (BPEF), polycaprolactone diol (PCL), and polytetramethylene ether glycol (PTMeG) in varying ratios. Also, as the results of mixing ethylene glycol phenyl ether acrylate (PHEA) and trimethylolpropanetriacrylate (TMPTA) in varying ratios, the more time UV irradiated, the higher conversion and the heat of enthalpy (ΔH) and the initial curing rate increased with increasing TMPTA content up to 70%. Also, as the trifunctional monomer increased, the storage modulus and Tg increased, and the stress increased while the strain decreased to reach its maximum value. Also, as the BPEF ratio increased, the maximum value of stress increased while the strain decreased, the refractive index and pencil hardness increased, and light transmittance was all over 80%.
- 22 November 2015
- Published by Taylor & Francis in Molecular Crystals and Liquid Crystals
- Vol. 622 (1) , 6-13
Preparation and Characterization of UV Cured Optical Films Containing a Fluorene Compound
In this study, the high refractive coating films applicable for optical materials were produced. the conversion and the photo curing behaviors were examined through FTIR-ATR and photo-DSC, and thermal and mechanical properties of cured films were examined by using DMA and UTM, and pencil hardness, refractive index and optical transmittance of film were measured. Urethane metacrylate oligomer was synthesized by mixing bisphenoxyethanolfluorene (BPEF), polycaprolactone diol (PCL), and polytetramethylene ether glycol (PTMeG) in varying ratios. Also, as the results of mixing ethylene glycol phenyl ether acrylate (PHEA) and trimethylolpropanetriacrylate (TMPTA) in varying ratios, the more time UV irradiated, the higher conversion and the heat of enthalpy (ΔH) and the initial curing rate increased with increasing TMPTA content up to 70%. Also, as the trifunctional monomer increased, the storage modulus and Tg increased, and the stress increased while the strain decreased to reach its maximum value. Also, as the BPEF ratio increased, the maximum value of stress increased while the strain decreased, the refractive index and pencil hardness increased, and light transmittance was all over 80%.
- 25 January 2015
- Published by The Polymer Society of Korea in Polymer Korea
- Vol. 39 (1) , 122-129
Antifouling Paint Resin Based on Polyurethane Matrix with Quaternary Ammonium Salt
- 25 January 2015
- Published by The Polymer Society of Korea in Polymer Korea
- Vol. 39 (1) , 122-129
Antifouling Paint Resin Based on Polyurethane Matrix with Quaternary Ammonium Salt