Haiyan Wang
Research Subjects
Haiyan Wang has a total of 86 co-authors. Here are the top co-authors by number of shared publications:
- Judith L. MacManus-Driscoll
Department of Materials Science & Metallurgy, University of Cambridge, Cambridge, UK
10 shared publications - Aiping Chen
Los Alamos National Laboratory
9 shared publications - Quanxi X. Jia
Department of Materials Design and Innovation, University at Buffalo, 136 Bell Hall, Buffalo, NY 14260, USA
9 shared publications Xinghang Zhang
9 shared publicationsZhenxing Bi
Department of Electrical and Computer Engineering, Texas A&M University, College Station, TX 77843-3128, USA
8 shared publicationsLi Chen
Department of Material Science and Engineering, Texas A&M University, College Station, TX 77843-3003, USA
7 shared publications
Latest Publications
- 6 April 2016
- Published by Springer Nature in MRS Bulletin
- Vol. 41 (4) , 305-313
In situ nanomechanical testing of twinned metals in a transmission electron microscope
- 6 April 2016
- Published by Springer Nature in MRS Bulletin
- Vol. 41 (4) , 305-313
In situ nanomechanical testing of twinned metals in a transmission electron microscope
- Open Access
- 11 December 2015
- Published by IOP Publishing in Journal of Physics: Condensed Matter
- Vol. 28 (2) , 025702
Magnetic (CoFe2O4)0.1(CeO2)0.9nanocomposite as effective pinning centers in FeSe0.1Te0.9thin films
Magnetic epitaxial (CoFe2O4)0.1(CeO2)0.9 nanocomposite layers were incorporated into superconducting FeSe0.1Te0.9 thin films as either a cap layer or a buffer layer. Both capped and buffered samples show an enhancement of the superconducting property compared to the reference sample without the incorporated layer, while the capped one shows the best pinning properties of all the samples. Specifically for the capped sample, the critical temperature is ~12.5 K, while the self-field critical current density increases to as high as 1.20 MA cm−2 at 4 K. Its value shows a slower decrease with increasing applied magnetic field, with the lowest power-law exponent α values (derived following by the plot) of 0.20, 0.23 and 0.33 at 2 K, 4 K and 8 K, respectively. This nanocomposite capped sample also exhibits a high upper critical field of 166 T, which indicates its potential in high field applications. This pinning method provides an effective way of enhancing the superconducting property of iron chalcogenide thin film.
- 11 December 2015
- Published by IOP Publishing in Journal of Physics: Condensed Matter
- Vol. 28 (2) , 025702
Open AccessMagnetic (CoFe2O4)0.1(CeO2)0.9nanocomposite as effective pinning centers in FeSe0.1Te0.9thin films
Magnetic epitaxial (CoFe2O4)0.1(CeO2)0.9 nanocomposite layers were incorporated into superconducting FeSe0.1Te0.9 thin films as either a cap layer or a buffer layer. Both capped and buffered samples show an enhancement of the superconducting property compared to the reference sample without the incorporated layer, while the capped one shows the best pinning properties of all the samples. Specifically for the capped sample, the critical temperature is ~12.5 K, while the self-field critical current density increases to as high as 1.20 MA cm−2 at 4 K. Its value shows a slower decrease with increasing applied magnetic field, with the lowest power-law exponent α values (derived following by the plot) of 0.20, 0.23 and 0.33 at 2 K, 4 K and 8 K, respectively. This nanocomposite capped sample also exhibits a high upper critical field of 166 T, which indicates its potential in high field applications. This pinning method provides an effective way of enhancing the superconducting property of iron chalcogenide thin film.
- 9 November 2015
- Published by Springer Nature in MRS Bulletin
- Vol. 40 (11) , 933-942
Composite epitaxial thin films: A new platform for tuning, probing, and exploiting mesoscale oxides
- 9 November 2015
- Published by Springer Nature in MRS Bulletin
- Vol. 40 (11) , 933-942
Composite epitaxial thin films: A new platform for tuning, probing, and exploiting mesoscale oxides
- 25 September 2015
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 7 (39) , 21646-21651
Perpendicular Exchange-Biased Magnetotransport at the Vertical Heterointerfaces in La0.7Sr0.3MnO3:NiO Nanocomposites
Heterointerfaces in manganite-based heterostructures in either layered or vertical geometry control their magnetotransport properties. Instead of using spin-polarized tunneling across the interface, a unique approach based on the magnetic exchange coupling along the vertical interface to control the magnetotransport properties has been demonstrated. By coupling ferromagnetic La0.7Sr0.3MnO3 and antiferromagnetic NiO in an epitaxial vertically aligned nanocomposite (VAN) architecture, a dynamic and reversible switch of the resistivity between two distinct exchange biased states has been achieved. This study explores the use of vertical interfacial exchange coupling to tailor magnetotransport properties, and demonstrates their viability for spintronic applications.
- 25 September 2015
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 7 (39) , 21646-21651
Perpendicular Exchange-Biased Magnetotransport at the Vertical Heterointerfaces in La0.7Sr0.3MnO3:NiO Nanocomposites
Heterointerfaces in manganite-based heterostructures in either layered or vertical geometry control their magnetotransport properties. Instead of using spin-polarized tunneling across the interface, a unique approach based on the magnetic exchange coupling along the vertical interface to control the magnetotransport properties has been demonstrated. By coupling ferromagnetic La0.7Sr0.3MnO3 and antiferromagnetic NiO in an epitaxial vertically aligned nanocomposite (VAN) architecture, a dynamic and reversible switch of the resistivity between two distinct exchange biased states has been achieved. This study explores the use of vertical interfacial exchange coupling to tailor magnetotransport properties, and demonstrates their viability for spintronic applications.
- 4 September 2015
- Published by Springer Nature in MRS Bulletin
- Vol. 40 (9) , 736-745
Multifunctional, self-assembled oxide nanocomposite thin films and devices
- 4 September 2015
- Published by Springer Nature in MRS Bulletin
- Vol. 40 (9) , 736-745
Multifunctional, self-assembled oxide nanocomposite thin films and devices
- 16 July 2015
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 7 (33) , 13808-13815
Strong perpendicular exchange bias in epitaxial La0.7Sr0.3MnO3:BiFeO3nanocomposite films through vertical interfacial coupling
An exchange bias effect with perpendicular anisotropy is of great interest owing to potential applications such as read heads in magnetic storage devices with high thermal stability and reduced dimensions. Here we report a novel approach for achieving perpendicular exchange bias by orienting the ferromagnetic/antiferromagnetic coupling in the vertical geometry through a unique vertically aligned nanocomposite (VAN) design. Our results demonstrate robust perpendicular exchange bias phenomena in micrometer-thick films employing a prototype material system of antiferromagnetic BiFeO3 and ferromagnetic La0.7Sr0.3MnO3. The unique response of exchange bias to a perpendicular magnetic field reveals the existence of exchange coupling along their vertical heterointerfaces, which exhibits a strong dependence on their strain states. This VAN approach enables a large selection of material systems for achieving perpendicular exchange bias, which could lead to advanced spintronic devices.
- 16 July 2015
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 7 (33) , 13808-13815
Strong perpendicular exchange bias in epitaxial La0.7Sr0.3MnO3:BiFeO3nanocomposite films through vertical interfacial coupling
An exchange bias effect with perpendicular anisotropy is of great interest owing to potential applications such as read heads in magnetic storage devices with high thermal stability and reduced dimensions. Here we report a novel approach for achieving perpendicular exchange bias by orienting the ferromagnetic/antiferromagnetic coupling in the vertical geometry through a unique vertically aligned nanocomposite (VAN) design. Our results demonstrate robust perpendicular exchange bias phenomena in micrometer-thick films employing a prototype material system of antiferromagnetic BiFeO3 and ferromagnetic La0.7Sr0.3MnO3. The unique response of exchange bias to a perpendicular magnetic field reveals the existence of exchange coupling along their vertical heterointerfaces, which exhibits a strong dependence on their strain states. This VAN approach enables a large selection of material systems for achieving perpendicular exchange bias, which could lead to advanced spintronic devices.
- 29 November 2013
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 2 (7) , 2283-2289
A new approach to investigate Li2MnO3and Li(Ni0.5Mn0.3Co0.2)O2mixed phase cathode materials
In this work, cathodes consisting of a Mn–rich electrochemically inactive Li2MnO3 phase and a Li(Ni0.5Mn0.3Co0.2)O2 (NMC) phase are processed by pulsed laser deposition (PLD). Different from the traditional bulk/powder synthesis approach, pure materials of the two phases are either uniformly integrated by co-deposition of the two phases or deposited sequentially as a layered structure, to emulate Li-rich mixed phase cathode materials. A high deposition temperature, 750 °C, was used to grow the films on c-cut sapphire and stainless steel substrates. The films either in a random form or in a more controlled multilayer-type, both show excellent film quality. The multilayer composite films show superior capacity, cycling and rate capabilities, with a capacity of 293 mA h g−1 at 0.05 C. This method gives much better control of the Mn content of the cathode, phase purity and combination schemes, i.e., mixing at the atomic level or embedding Li2MnO3 domains of different sizes in the NMC matrix or both. Moreover, this approach can be applied to screen lithium-rich Mn phase and other novel material combinations in a more controlled and expedient manner.
- 29 November 2013
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 2 (7) , 2283-2289
A new approach to investigate Li2MnO3and Li(Ni0.5Mn0.3Co0.2)O2mixed phase cathode materials
In this work, cathodes consisting of a Mn–rich electrochemically inactive Li2MnO3 phase and a Li(Ni0.5Mn0.3Co0.2)O2 (NMC) phase are processed by pulsed laser deposition (PLD). Different from the traditional bulk/powder synthesis approach, pure materials of the two phases are either uniformly integrated by co-deposition of the two phases or deposited sequentially as a layered structure, to emulate Li-rich mixed phase cathode materials. A high deposition temperature, 750 °C, was used to grow the films on c-cut sapphire and stainless steel substrates. The films either in a random form or in a more controlled multilayer-type, both show excellent film quality. The multilayer composite films show superior capacity, cycling and rate capabilities, with a capacity of 293 mA h g−1 at 0.05 C. This method gives much better control of the Mn content of the cathode, phase purity and combination schemes, i.e., mixing at the atomic level or embedding Li2MnO3 domains of different sizes in the NMC matrix or both. Moreover, this approach can be applied to screen lithium-rich Mn phase and other novel material combinations in a more controlled and expedient manner.
- 14 October 2013
- Published by IOP Publishing in Superconductor Science and Technology
- Vol. 26 (11) , 112001
Superconducting properties of FeSexTe1−xthin film with a composition close to antiferromagnetic ordering
In this study Te-rich iron chalcogenide (FeSexTe1−x) thin films with a composition close to antiferromagnetic ordering have been deposited on SrTiO3 (STO) substrates. The superconducting critical transition temperature (Tc) of the FeSe0.1Te0.9 thin film on STO substrate ranges from ∼12.5 to ∼13.3 K. The upper critical field is as high as 114 T, which is much higher than that of the FeSe0.5Te0.5 thin film on STO substrate (∼49 T). The self-field critical current density () at 2 K of 1.8 × 105 A cm−2 is much higher than that of the FeSe0.5Te0.5 thin film, and the FeSe0.1Te0.9 thin film also demonstrates superior pinning properties under applied magnetic field. Compared to FeSe0.5Te0.5, which was considered as the optimum composition, FeSe0.1Te0.9 presents even more promise for high field applications because of its high upper critical field and high critical current density.
- 14 October 2013
- Published by IOP Publishing in Superconductor Science and Technology
- Vol. 26 (11) , 112001
Superconducting properties of FeSexTe1−xthin film with a composition close to antiferromagnetic ordering
In this study Te-rich iron chalcogenide (FeSexTe1−x) thin films with a composition close to antiferromagnetic ordering have been deposited on SrTiO3 (STO) substrates. The superconducting critical transition temperature (Tc) of the FeSe0.1Te0.9 thin film on STO substrate ranges from ∼12.5 to ∼13.3 K. The upper critical field is as high as 114 T, which is much higher than that of the FeSe0.5Te0.5 thin film on STO substrate (∼49 T). The self-field critical current density () at 2 K of 1.8 × 105 A cm−2 is much higher than that of the FeSe0.5Te0.5 thin film, and the FeSe0.1Te0.9 thin film also demonstrates superior pinning properties under applied magnetic field. Compared to FeSe0.5Te0.5, which was considered as the optimum composition, FeSe0.1Te0.9 presents even more promise for high field applications because of its high upper critical field and high critical current density.
- 23 September 2013
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 114 (12) , 124101
Strong oxygen pressure dependence of ferroelectricity in BaTiO3/SrRuO3/SrTiO3 epitaxial heterostructures
The oxygen pressure effect on the structural and ferroelectric properties have been studied in epitaxial BaTiO3 (BTO)/SrRuO3/SrTiO3 (001) heterostructures grown by pulsed laser deposition. It is found that oxygen pressure is a sensitive parameter, which can influence the characteristics of oxide films in many aspects. The out-of-plane lattice parameter, tetragonality, (c/a) and Ti/Ba ratio monotonously decrease as the oxygen pressure increases from 5 mTorr to 200 mTorr. Microstructural study shows that the growth of BaTiO3 varies from a dense large grained structure with a smooth surface to a small columnar grain structure with rough surface as the deposition pressure increases. Electrical measurements show that the 40 mTorr deposited BTO films present maximum remanent polarization (Pr) (14 μC/cm2) and saturation polarization (Ps) (27 μC/cm2) due to the stoichiometric cation ratio, very smooth surface, and low leakage current. These results demonstrate that the controlling of cation stoichiometry, surface morphology, and leakage current by oxygen pressure is one of very important prerequisites for device applications in the BaTiO3 films.
- 23 September 2013
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 114 (12) , 124101
Strong oxygen pressure dependence of ferroelectricity in BaTiO3/SrRuO3/SrTiO3 epitaxial heterostructures
The oxygen pressure effect on the structural and ferroelectric properties have been studied in epitaxial BaTiO3 (BTO)/SrRuO3/SrTiO3 (001) heterostructures grown by pulsed laser deposition. It is found that oxygen pressure is a sensitive parameter, which can influence the characteristics of oxide films in many aspects. The out-of-plane lattice parameter, tetragonality, (c/a) and Ti/Ba ratio monotonously decrease as the oxygen pressure increases from 5 mTorr to 200 mTorr. Microstructural study shows that the growth of BaTiO3 varies from a dense large grained structure with a smooth surface to a small columnar grain structure with rough surface as the deposition pressure increases. Electrical measurements show that the 40 mTorr deposited BTO films present maximum remanent polarization (Pr) (14 μC/cm2) and saturation polarization (Ps) (27 μC/cm2) due to the stoichiometric cation ratio, very smooth surface, and low leakage current. These results demonstrate that the controlling of cation stoichiometry, surface morphology, and leakage current by oxygen pressure is one of very important prerequisites for device applications in the BaTiO3 films.
- Open Access
- 22 August 2013
- Published by Springer Nature in Discover Nano
- Vol. 8 (1) , 359
Nanostructured conformal hybrid solar cells: a promising architecture towards complete charge collection and light absorption
We introduce hybrid solar cells with an architecture consisting of an electrodeposited ZnO nanorod array (NRA) coated with a conformal thin layer (<50 nm) of organic polymer-fullerene blend and a quasi-conformal Ag top contact (Thin/NR). We have compared the performance of Thin/NR cells to conventional hybrid cells in which the same NRAs are completely filled with organic blend (Thick/NR). The Thin/NR design absorbs at least as much light as Thick/NR cells, while charge extraction is significantly enhanced due to the proximity of the electrodes, resulting in a higher current density per unit volume of blend and improved power conversion efficiency. The NRAs need not be periodic or aligned and hence can be made very simply.
- 22 August 2013
- Published by Springer Nature in Discover Nano
- Vol. 8 (1) , 359
Open AccessNanostructured conformal hybrid solar cells: a promising architecture towards complete charge collection and light absorption
We introduce hybrid solar cells with an architecture consisting of an electrodeposited ZnO nanorod array (NRA) coated with a conformal thin layer (<50 nm) of organic polymer-fullerene blend and a quasi-conformal Ag top contact (Thin/NR). We have compared the performance of Thin/NR cells to conventional hybrid cells in which the same NRAs are completely filled with organic blend (Thick/NR). The Thin/NR design absorbs at least as much light as Thick/NR cells, while charge extraction is significantly enhanced due to the proximity of the electrodes, resulting in a higher current density per unit volume of blend and improved power conversion efficiency. The NRAs need not be periodic or aligned and hence can be made very simply.