BBBronislaw Buczek

Bronislaw Buczek

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Bronislaw Buczek has a total of 3 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Methane Recovery from Gaseous Mixtures Using Carbonaceous Adsorbents

    by Bronisław Buczek

    Methane recovery from gaseous mixtures has both economical and ecological aspect. Methane from different waste gases like mine gases, nitrogenated natural gases and biogases can be treated as local source for production electric and heat energy. Also occurs the problem of atmosphere pollution with methane that shows over 20 times more harmful environmental effect in comparison to carbon dioxide. One of the ways utilisation such gases is enrichment of methane in the PSA technique, which requires appropriate adsorbents. Active carbons and carbon molecular sieve produced by industry and obtained in laboratory scale were examined as adsorbent for methane recuperation. Porous structure of adsorbents was investigated using densimetry measurements and adsorption of argon at 77.5K. On the basis of adsorption data, the Dubinin-Radushkevich equation parameters, micropore volume (Wo) and characteristics of energy adsorption (Eo) as well as area micropores (Smi) and BET area (SBET) were determined. The usability of adsorbents in enrichment of the methane was evaluated in the test, which simulate the basic stages of PSA process: a) adsorbent degassing, b) pressure raise in column by feed gas, c) cocurrent desorption with analysis of out flowing gas. The composition of gas phase was accepted as the criterion of the suitability of adsorbent for methane separation from gaseous mixtures. The relationship between methane recovery from gas mixture and texture parameters of adsorbents was found.


  • Open Access

    Preparation of Active Carbon by Additional Activation with Potassium Hydroxide and Characterization of Their Properties

    by Bronislaw Buczek

    A commercially available activated carbon was used to prepare active carbonviareactivation with KOH at 750°C. Active carbon was obtained with 60.5% yield. The resulting active carbon showed a well-developed porous structure with specific surface area 2939 m2/g, total pore volume 1.488 cm3/g, and micropore volume 1.001 cm3/g. Process reactivation of carbon changes its particle size as well as density properties and increases by nearly twice the amounts of methane and carbon dioxide adsorbed under high pressure conditions. Such active carbon may be used to enrich methane or carbon dioxide by pressure swing adsorption technique. Other possible applications of reactivated carbon are storage of hydrogen and methane and sequestration of carbon dioxide.


  • Open Access

    WATERPROOF ANTI-EXPLOSIVE POWDERS FOR COAL MINES

    by Bronisław Buczek, Elżbieta Vogt

    Limestone powder characterized by hydrophobic properties is used as an anti-explosive agent in coal mining industry. Unfortunately, the standard method of producing such powder by milling limestone with stearic acid is practically unprofitable in many modernized quarries and plants, and sometimes literally impossible due to the introduction of technological changes and implementation of modern mills. Then new methods of hydrophobization of limestone surfaces ought be searched. In the work two methods hydrophobization: from the stearic acid vapour phase and from silicone solutions are proposed. Lime dust from the Czatkowice Quarry of Lime was used as a raw material during investigations. It is a good agent for research because it is possible to compare the properties of samples modified in this work to the properties of anti-explosive lime powder (Polish Standard, 1994) used in mining industry in Poland. The first technique of limestone powder hydrophobization was carried out in an apparatus of own design (Vogt, 2008, 2011), and it consisted in free sedimentation of the powder layer dispersed by stearic acid vapour in powder counter current flow. The second way of modification consisted in mixing in the evaporating dish substrates: limestone powder and dope - silicone solution - Sarsil® H-15 (Vogt & Opaliński, 2009; Vogt & Hołownia, 2010). Evaluation of properties so-obtained waterproof powders was carried out according to the Polish Standard, as well as using original powder determination ways, with the Powder Characteristic Tester (Index tables, Tablets & Capsules, 2005). Moreover water vapour adsorption isotherms were obtained and the thermal decomposition of powder was made. All modified samples acquired the hydrophobic character. Therefore we can state that the both proposed methods of hydrophobization of the limestone powder are useful. The parameters obtained with the use of Powder Characteristics Tester enable us to make a characterization of limestone properties not only as a water resistant material but also from the cohesion point of view. On the base of TG, DTG or DTA and EGA curves for all investigated materials was stated that the character of the thermal decomposition of modified samples is the same as this one for raw powder, what is profitable for application of hydrophobized powders as an anti-explosive agent.


  • Open Access

    Diesel Fuel from Used Frying Oil

    by Bronislaw Buczek

    New conversion technologies of used edible oils and waste animal fats into a biofuel appropriate for use in standard diesel engines have been developed, taking into consideration environmental requirements and improvement in the economics of current trans-esterification technologies. The variation in the properties of substrates made from used rape oil after treatment with mixed adsorbents (active carbon, magnesium silicate) was studied in this work. The obtained results are compared with the quality requirements for the substrates used in Vogel & Noot GmbH technology for transesterification of oils and fats.


  • Analysis of Spent Active Coke Properties by Spouted Bed Technique

    by Bronislaw Buczek

    Samples of active coke, fresh and spent after cleaning flue gases from communal waste incinerators, were studied. The outer layers of both coke particles were separately removed by comminution mechanism in a spouted bed. Analyses included density, mercury porosimetry and adsorption. The remaining cores were examined to determine the degree of consumption of coke by adsorption of hazardous emissions (SO2, HCl, heavy metals) through its bed. The differences in contamination levels within the porous structure of the particles were estimated. The study demonstrated the effectiveness of active coke in the cleaning of flue gases.

  • Open Access

    Effect of Carbonisate Particles on the Properties of Active Carbons

    by Bronislaw Buczek

    In this article, the effect of particle geometry on the properties of active carbons, which are obtained by treating steam with hard coal-tar carbonisate, is reported. Different shapes of carbonisates were activated by superheated steam at 1123 K in a monolayer reactor with burn-off rates between 45.3% and 72.0%. Steam activation leads to a faster development of ring-shaped particles, and the kinetics of the process influence surface area Brunauer–Emmet–Teller, surface mesoporosity and the micropore volume. The micropore and mesopore structures of active carbons are evaluated using nitrogen adsorption/desorption isotherms and the corresponding parameters of the Dubinin–Radushkevich equation are presented. Micropore-size distribution is calculated using the Horvath–Kawazoe method. The results of these textural investigations showed that a more uniform micropore structure and better mechanical properties are present in ring-shaped active carbon particles than that were reported earlier.

  • Open Access

    Properties of Spent Active Coke Particles Analysed via Comminutionin Spouted Bed

    by Bronislaw Buczek

    Samples of active coke, fresh and spent after cleaning flue gases from communal waste incinerators, were investigated. The outer layers of both coke particles were separately removed by comminution in a spouted bed. The samples of both active cokes were analysed by means of densities, mercury porosimetry, and adsorption technique. Remaining cores were examined to determine the degree of consumption of coke by the sorption of hazardous emissions (SO2, HCl, and heavy metals) through its bed. Differences in contamination levels within the porous structure of the particles were estimated. The study demonstrated the effectiveness of commercial active coke in the cleaning of flue gases.

  • Properties of active carbon with various particle shapes obtained in char-steam reaction Properties of active carbon with various particle shapes obtained in char-steam reaction

    by Bronisław Buczek

    The porous structure of cylindrical and ring-shaped char material was developed by partial steam gasification. Micropore and mesopore structures of active carbons with various forms of burn-off were evaluated by nitrogen adsorption/desorption isotherms. Parameters of the Dubinin- Radushkevich equation were calculated as well as the micropore size distribution by the Horvath- Kawazoe method. The results of textural investigations showed that more uniform micropore structure and better mechanical properties were found for ring-shaped active carbons.


  • Open Access

    Purification of the used palm oil by adsorption

    by Bronisław Buczek, Wojciech Chwiałkowski

    Purification of the used palm oil by adsorption: The components of fresh vegetable oils are mainly non-polar. During frying of food, complex and multistage reactions occur in the oil, which produce various polar compounds. Active carbons are characterized by small contents of polar functional groups, which are responsible for adsorbing such polar compounds. Effective purification of the used frying oils must involve the removal of the polar substances. To improve the quality of the used palm oil, an active carbon oxidized by a hydrogen peroxide treatment was used. Such a carbonaceous adsorbent improves the quality of the oil used for frying food by purifying it from colour substances, lipid hydrolysis products, oxidation products and total polar compounds.