Emanuele Guglielmino
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Emanuele Guglielmino has a total of 18 co-authors. Here are the top co-authors by number of shared publications:
- Darwin Gordon Caldwell
Instituto Italiano di Tecnologia
4 shared publications - David T. Branson
Faculty of Engineering, University of Nottingham, Nottingham NG7 2RD, UK
2 shared publications - Rongjie Kang
Istituto Italiano di Tecnologia
2 shared publications - Claudio Semini
Istituto Italiano di Tecnologia
1 shared publication - Esa Kostamo
Aalto University School of Engineering, Sähkömiehentie 4, Espoo 02150, Finland
1 shared publication - Gustavo A. Medrano Cerda
Istituto Italiano di Tecnologia Department of Advanced Robotics Via Morego, 30, Genova 16163 , Italy
1 shared publication
Latest Publications
- 26 November 2013
- Published by Wiley in Journal of Mechanical Design
- Vol. 136 (2) , 021003
Magnetorheologically Damped Compliant Foot for Legged Robotic Application
This paper presents an innovative solution for bounce reduction between a robotic leg and the ground by means of a semi-active compliant foot. The aim of this work is to enhance the controllability and the balance of a legged robot by improving the traction between the foot tip and the ground. The compliant foot is custom-designed for quadruped walking robots and it consists of a linear spring and a magnetorheological (MR) damper. By utilizing magnetorheological technology in the damper element, the damping coefficient of the compliant foot can be altered across a wide range without any additional moving parts. The content of this paper is twofold. In the first part the design, a prototype and a model of the semi-active compliant foot are presented, and the performance of the magnetorheological damper is experimentally studied in quasi-static and dynamic cases. Based on the quasi-static measurements, the damping force can be controlled in a range from 15 N to 310 N. From the frequency response measurements, it can be shown that the controllable damping force has a bandwidth higher than 100 Hz. The second part of this paper presents an online stiffness identification algorithm and a mathematical model of the robotic leg. A critical damping control law is proposed and implemented in order to demonstrate the effectiveness of the device that makes use of smart materials. Further on, drop tests have been carried out to assess the performance of the proposed control law in terms of bounce reduction and settling time. The results demonstrate that by real-time control of the damping force 98% bounce reduction with settling time of 170 ms can be achieved.
- 26 November 2013
- Published by Wiley in Journal of Mechanical Design
- Vol. 136 (2) , 021003
Magnetorheologically Damped Compliant Foot for Legged Robotic Application
This paper presents an innovative solution for bounce reduction between a robotic leg and the ground by means of a semi-active compliant foot. The aim of this work is to enhance the controllability and the balance of a legged robot by improving the traction between the foot tip and the ground. The compliant foot is custom-designed for quadruped walking robots and it consists of a linear spring and a magnetorheological (MR) damper. By utilizing magnetorheological technology in the damper element, the damping coefficient of the compliant foot can be altered across a wide range without any additional moving parts. The content of this paper is twofold. In the first part the design, a prototype and a model of the semi-active compliant foot are presented, and the performance of the magnetorheological damper is experimentally studied in quasi-static and dynamic cases. Based on the quasi-static measurements, the damping force can be controlled in a range from 15 N to 310 N. From the frequency response measurements, it can be shown that the controllable damping force has a bandwidth higher than 100 Hz. The second part of this paper presents an online stiffness identification algorithm and a mathematical model of the robotic leg. A critical damping control law is proposed and implemented in order to demonstrate the effectiveness of the device that makes use of smart materials. Further on, drop tests have been carried out to assess the performance of the proposed control law in terms of bounce reduction and settling time. The results demonstrate that by real-time control of the damping force 98% bounce reduction with settling time of 170 ms can be achieved.
- 26 March 2013
- Published by ASME International in Journal of Mechanisms and Robotics
- Vol. 5 (2) , 021004
Model Validation of an Octopus Inspired Continuum Robotic Arm for Use in Underwater Environments
Octopuses are an example of dexterous animals found in nature. Their arms are flexible, can vary in stiffness, grasp objects, apply high forces with respect to their relatively light weight, and bend in all directions. Robotic structures inspired by octopus arms have to undertake the challenges of a high number of degrees of freedom (DOF), coupled with highly flexible continuum structure. This paper presents a kinematic and dynamic model for underwater continuum robots inspired by Octopus vulgaris. Mass, damping, stiffness, and external forces such as gravity, buoyancy, and hydrodynamic forces are considered in the dynamic model. A continuum arm prototype was built utilizing longitudinal and radial actuators, and comparisons between the simulated and experimental results show good agreement.
- 26 March 2013
- Published by ASME International in Journal of Mechanisms and Robotics
- Vol. 5 (2) , 021004
Model Validation of an Octopus Inspired Continuum Robotic Arm for Use in Underwater Environments
Octopuses are an example of dexterous animals found in nature. Their arms are flexible, can vary in stiffness, grasp objects, apply high forces with respect to their relatively light weight, and bend in all directions. Robotic structures inspired by octopus arms have to undertake the challenges of a high number of degrees of freedom (DOF), coupled with highly flexible continuum structure. This paper presents a kinematic and dynamic model for underwater continuum robots inspired by Octopus vulgaris. Mass, damping, stiffness, and external forces such as gravity, buoyancy, and hydrodynamic forces are considered in the dynamic model. A continuum arm prototype was built utilizing longitudinal and radial actuators, and comparisons between the simulated and experimental results show good agreement.
- Open Access
- 1 January 2013
- Published by Frontiers Media SA in Frontiers in Computational Neuroscience
- Vol. 7, 91
A soft body as a reservoir: case studies in a dynamic model of octopus-inspired soft robotic arm
The behaviors of the animals or embodied agents are characterized by the dynamic coupling between the brain, the body, and the environment. This implies that control, which is conventionally thought to be handled by the brain or a controller, can partially be outsourced to the physical body and the interaction with the environment. This idea has been demonstrated in a number of recently constructed robots, in particular from the field of “soft robotics”. Soft robots are made of a soft material introducing high-dimensionality, non-linearity, and elasticity, which often makes the robots difficult to control. Biological systems such as the octopus are mastering their complex bodies in highly sophisticated manners by capitalizing on their body dynamics. We will demonstrate that the structure of the octopus arm cannot only be exploited for generating behavior but also, in a sense, as a computational resource. By using a soft robotic arm inspired by the octopus we show in a number of experiments how control is partially incorporated into the physical arm's dynamics and how the arm's dynamics can be exploited to approximate non-linear dynamical systems and embed non-linear limit cycles. Future application scenarios as well as the implications of the results for the octopus biology are also discussed.
- 1 January 2013
- Published by Frontiers Media SA in Frontiers in Computational Neuroscience
- Vol. 7, 91
Open AccessA soft body as a reservoir: case studies in a dynamic model of octopus-inspired soft robotic arm
The behaviors of the animals or embodied agents are characterized by the dynamic coupling between the brain, the body, and the environment. This implies that control, which is conventionally thought to be handled by the brain or a controller, can partially be outsourced to the physical body and the interaction with the environment. This idea has been demonstrated in a number of recently constructed robots, in particular from the field of “soft robotics”. Soft robots are made of a soft material introducing high-dimensionality, non-linearity, and elasticity, which often makes the robots difficult to control. Biological systems such as the octopus are mastering their complex bodies in highly sophisticated manners by capitalizing on their body dynamics. We will demonstrate that the structure of the octopus arm cannot only be exploited for generating behavior but also, in a sense, as a computational resource. By using a soft robotic arm inspired by the octopus we show in a number of experiments how control is partially incorporated into the physical arm's dynamics and how the arm's dynamics can be exploited to approximate non-linear dynamical systems and embed non-linear limit cycles. Future application scenarios as well as the implications of the results for the octopus biology are also discussed.
- 13 June 2012
- Published by Springer Nature
- p. 423-432
Bio-Inspired Dynamic Model for a Reconfigurable Multiple Continuum Arm Robot
- 13 June 2012
- Published by Springer Nature
- p. 423-432
Bio-Inspired Dynamic Model for a Reconfigurable Multiple Continuum Arm Robot