Kamellia Nejati
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Kamellia Nejati has a total of 21 co-authors. Here are the top co-authors by number of shared publications:
Zolfaghar Rezvani
Azarbaijan Shahid Madani University
6 shared publications- Zolfaghar Rezvani
Department of Chemistry, Faculty of Basic Sciences, Azarbaijan Shahid Madani University, Tabriz, Iran
3 shared publications - Esmail Vessally
Department of Chemistry, Payame Noor University, P. O. Box 19395-1697, Tehran, Iran
2 shared publications - Karim Asadpour-Zeynali
Department of Analytical Chemistry, Faculty of Chemistry, University of Tabriz, Tabriz, Iran
2 shared publications A. Hosseinian
Department of Engineering Science, College of Engineering, University of Tehran, P.O. Box 11365-4563, Tehran, Iran
1 shared publicationAbolfazl Mirzaee
1 shared publication
Latest Publications
- 15 April 2021
- Published by Royal Society of Chemistry (RSC) in Dalton Transactions
- Vol. 50 (21) , 7223-7228
Fast microwave-assisted preparation of nickel–copper–chromium-layered double hydroxide as an excellent electrocatalyst for water oxidation
A well-designed NiCuCr-LDH was prepared using a simple microwave method. According to the OER results, doping optimal amount of Cu2+ into NiCr-LDH displayed superior OER activity, due to decreased bandgap energy and improved charge transfer.
- 15 April 2021
- Published by Royal Society of Chemistry (RSC) in Dalton Transactions
- Vol. 50 (21) , 7223-7228
Fast microwave-assisted preparation of nickel–copper–chromium-layered double hydroxide as an excellent electrocatalyst for water oxidation
A well-designed NiCuCr-LDH was prepared using a simple microwave method. According to the OER results, doping optimal amount of Cu2+ into NiCr-LDH displayed superior OER activity, due to decreased bandgap energy and improved charge transfer.
- 29 January 2018
- Published by Royal Society of Chemistry (RSC) in New Journal of Chemistry
- Vol. 42 (4) , 2889-2895
Zn–Fe-layered double hydroxide intercalated with vanadate and molybdate anions for electrocatalytic water oxidation
The electrocatalytic water oxidation behavior of Zn–Fe–NO 3 –LDH, Zn–Fe–VO 4 -LDH and Zn–Fe–MoO 4 –LDH has been investigated.
- 29 January 2018
- Published by Royal Society of Chemistry (RSC) in New Journal of Chemistry
- Vol. 42 (4) , 2889-2895
Zn–Fe-layered double hydroxide intercalated with vanadate and molybdate anions for electrocatalytic water oxidation
The electrocatalytic water oxidation behavior of Zn–Fe–NO 3 –LDH, Zn–Fe–VO 4 -LDH and Zn–Fe–MoO 4 –LDH has been investigated.
- 1 June 2017
- Published by Elsevier in Journal of Molecular Graphics and Modelling
- Vol. 74, 1-7
Na-ion batteries based on the inorganic BN nanocluster anodes: DFT studies
- 1 June 2017
- Published by Elsevier in Journal of Molecular Graphics and Modelling
- Vol. 74, 1-7
Na-ion batteries based on the inorganic BN nanocluster anodes: DFT studies
- 6 February 2015
- Published by Taylor & Francis in Journal of Sulfur Chemistry
- Vol. 36 (2) , 207-215
The intermolecular interaction studies in the complexes of isothiocyanic acid (HNCS) and its derivatives with H2S: a computational study
The computational investigations are carried out on the complexes of isothiocyanic acid (HNCS) and its derivatives with H2S through MP2/aug-cc-PVTZ//MP2/aug-cc-PVDZ level. Five, four, three and four structures are located on the potential energy surface of the HNCS‒H2S, HSCN‒ H2S, HCNS‒ H2S and HSNC‒H2S heterodimers, respectively. The calculated results reveal that the most stable heterodimers among all heterodimers obtained for the HNCS‒H2S, HSCN‒H2S, HCNS‒H2S and HSNC‒H2S systems belong to HSCN‒H2S system. Therefore, HSCN‒H2S system has a key role in the atmosphere.
- 6 February 2015
- Published by Taylor & Francis in Journal of Sulfur Chemistry
- Vol. 36 (2) , 207-215
The intermolecular interaction studies in the complexes of isothiocyanic acid (HNCS) and its derivatives with H2S: a computational study
The computational investigations are carried out on the complexes of isothiocyanic acid (HNCS) and its derivatives with H2S through MP2/aug-cc-PVTZ//MP2/aug-cc-PVDZ level. Five, four, three and four structures are located on the potential energy surface of the HNCS‒H2S, HSCN‒ H2S, HCNS‒ H2S and HSNC‒H2S heterodimers, respectively. The calculated results reveal that the most stable heterodimers among all heterodimers obtained for the HNCS‒H2S, HSCN‒H2S, HCNS‒H2S and HSNC‒H2S systems belong to HSCN‒H2S system. Therefore, HSCN‒H2S system has a key role in the atmosphere.
- 1 November 2014
- Published by Elsevier in Superlattices and Microstructures
- Vol. 75, 257-267
Synthesis and investigation of magnetic nanocomposite of Fe 3 O 4 with cetirizine-intercalated layered double hydroxide
- 1 November 2014
- Published by Elsevier in Superlattices and Microstructures
- Vol. 75, 257-267
Synthesis and investigation of magnetic nanocomposite of Fe 3 O 4 with cetirizine-intercalated layered double hydroxide
- Open Access
- 1 September 2014
- Published by Elsevier in International Journal of Electrochemical Science
- Vol. 9 (9) , 5222-5234
Determination of 2-Nitrophenol by Electrochemical Synthesized Mg/Fe Layered Double Hydroxide Sensor
- 1 September 2014
- Published by Elsevier in International Journal of Electrochemical Science
- Vol. 9 (9) , 5222-5234
Open AccessDetermination of 2-Nitrophenol by Electrochemical Synthesized Mg/Fe Layered Double Hydroxide Sensor
- 30 October 2012
- Published by Wiley in Crystal Research and Technology
- Vol. 47 (11) , 1172-1184
Mixed metal oxide nanocomposites derived from layered double hydroxides as photocatalysts for C.I. Basic Blue 3 degradation under UV light
In this research we report synthesis of the heterostructure Mg‐Al‐Zn mixed metal oxide (ZnO/MMO) nanocomposite photocatalysts derived from Zn(OH)2/Mg‐Al‐layered double hydroxides (ZLDHs) precursors. The obtained samples were characterized by the X‐ray diffraction (XRD), FT‐IR, BET surface area, ICP and TG/DTG methods. The chemical compositions and morphology of the synthesized materials were investigated by the energy dispersive X‐ray analysis (EDX) and the transmission electron microscopy (TEM). The results reveal that at the reaction time 96 h, ZLDH has the highest crystalinity which was confirmed by the X‐ray diffraction spectra. The calcined samples at 500, 600 and 700 °C for 4 h show that the crystallinity of the nanocomposite improves with the increase of calcination temperature. The photocatalytic activities of synthesized nanocomposites were compared for the degradation of C. I. Basic Blue 3 (BB3) dye under UV illumination in aqueous solution. Among the synthesized nanocomposites, ZnO/MMO calcined at 700 °C shows the highest efficiency towards the removal of dye. The effect of UV illumination on the stability of ZnO in ZnO/MMO nanocomposite and pure ZnO was also investigated. The results showed that the photostability of ZnO in ZnO/MMO nanocomposite is increased compared to the pure ZnO.
- 30 October 2012
- Published by Wiley in Crystal Research and Technology
- Vol. 47 (11) , 1172-1184
Mixed metal oxide nanocomposites derived from layered double hydroxides as photocatalysts for C.I. Basic Blue 3 degradation under UV light
In this research we report synthesis of the heterostructure Mg‐Al‐Zn mixed metal oxide (ZnO/MMO) nanocomposite photocatalysts derived from Zn(OH)2/Mg‐Al‐layered double hydroxides (ZLDHs) precursors. The obtained samples were characterized by the X‐ray diffraction (XRD), FT‐IR, BET surface area, ICP and TG/DTG methods. The chemical compositions and morphology of the synthesized materials were investigated by the energy dispersive X‐ray analysis (EDX) and the transmission electron microscopy (TEM). The results reveal that at the reaction time 96 h, ZLDH has the highest crystalinity which was confirmed by the X‐ray diffraction spectra. The calcined samples at 500, 600 and 700 °C for 4 h show that the crystallinity of the nanocomposite improves with the increase of calcination temperature. The photocatalytic activities of synthesized nanocomposites were compared for the degradation of C. I. Basic Blue 3 (BB3) dye under UV illumination in aqueous solution. Among the synthesized nanocomposites, ZnO/MMO calcined at 700 °C shows the highest efficiency towards the removal of dye. The effect of UV illumination on the stability of ZnO in ZnO/MMO nanocomposite and pure ZnO was also investigated. The results showed that the photostability of ZnO in ZnO/MMO nanocomposite is increased compared to the pure ZnO.
- Open Access
- 1 May 2012
- Published by Taylor & Francis in Journal of Experimental Nanoscience
- Vol. 7 (4) , 412-425
Synthesis and characterisation of nanohybrids of olsalazine-intercalated Al–Mg layered double hydroxide
In this study, olsalazine (3,3′-azobis 6-hydroxy benzoic acid) was intercalated into Mg–Al layered double hydroxides (LDHs) by ion exchange or coprecipitation methods to obtain olsalazine–LDH nanohybrids. Powder X-ray diffraction (XRD), Fourier transform infrared spectra and elemental analyses indicate a successful intercalation of olsalazine with a vertical orientation. Intercalation of organic anion of olsalazine into Mg–Al LDH caused the interlayer spacing of LDH to increase from 0.884 to 1.665–1.666 nm as determined by XRD studies. Thermogravimetric analyses propose that the thermal stability of the intercalated organic anion of olsalazine is largely improved compared to the pure form before intercalation due to the host–guest interaction involving the hydrogen bond. Furthermore, in vitro drug release experiments in pH 7.4 phosphate buffer solution have been investigated. The drug molecules during dissolution were exchanged with anions in the medium, thus leading to a slow release, much slower than when the same matrix was used simply mixed with the drug.
- 1 May 2012
- Published by Taylor & Francis in Journal of Experimental Nanoscience
- Vol. 7 (4) , 412-425
Open AccessSynthesis and characterisation of nanohybrids of olsalazine-intercalated Al–Mg layered double hydroxide
In this study, olsalazine (3,3′-azobis 6-hydroxy benzoic acid) was intercalated into Mg–Al layered double hydroxides (LDHs) by ion exchange or coprecipitation methods to obtain olsalazine–LDH nanohybrids. Powder X-ray diffraction (XRD), Fourier transform infrared spectra and elemental analyses indicate a successful intercalation of olsalazine with a vertical orientation. Intercalation of organic anion of olsalazine into Mg–Al LDH caused the interlayer spacing of LDH to increase from 0.884 to 1.665–1.666 nm as determined by XRD studies. Thermogravimetric analyses propose that the thermal stability of the intercalated organic anion of olsalazine is largely improved compared to the pure form before intercalation due to the host–guest interaction involving the hydrogen bond. Furthermore, in vitro drug release experiments in pH 7.4 phosphate buffer solution have been investigated. The drug molecules during dissolution were exchanged with anions in the medium, thus leading to a slow release, much slower than when the same matrix was used simply mixed with the drug.
- 10 August 2011
- Published by Wiley in Zeitschrift für anorganische und allgemeine Chemie
- Vol. 637 (11) , 1573-1579
Adsorption of Metanil Yellow Azoic Dye from Aqueous Solution onto Mg‐Fe‐NO3 Layered Double Hydroxide
We report the preparation and characterization of a layered double hydroxide (LDH) adsorbent for azoic dye, metanil yellow (yellow GX; YGX) removal. The nanoparticles of Mg‐Fe‐LDH‐NO3 adsorbent were prepared with Mg/Fe molar ratio of 3:1 by a hydrothermal process and coprecipitation method at pH 9.5 and were characterized by X‐ray powder diffraction (XRPD), thermal gravimetric analysis (TGA), elemental analysis, and Fourier transform infrared spectroscopy (FT‐IR). The size and morphology of nanoparticles were examined by scanning electron microscopy (SEM). The XRD patterns indicate that the intercalation of YGX between the LDH layers has not occurred and surface adsorption has happened. In the adsorption experiments, the Gibbs free energy ΔG0 values, the enthalpy ΔH0, and entropy ΔS0 was determined. The isotherms showed that the adsorption of YGX by Mg‐Fe‐LDH‐NO3 was both consistent with Langmuir and Freundlich equations.
- 10 August 2011
- Published by Wiley in Zeitschrift für anorganische und allgemeine Chemie
- Vol. 637 (11) , 1573-1579
Adsorption of Metanil Yellow Azoic Dye from Aqueous Solution onto Mg‐Fe‐NO3 Layered Double Hydroxide
We report the preparation and characterization of a layered double hydroxide (LDH) adsorbent for azoic dye, metanil yellow (yellow GX; YGX) removal. The nanoparticles of Mg‐Fe‐LDH‐NO3 adsorbent were prepared with Mg/Fe molar ratio of 3:1 by a hydrothermal process and coprecipitation method at pH 9.5 and were characterized by X‐ray powder diffraction (XRPD), thermal gravimetric analysis (TGA), elemental analysis, and Fourier transform infrared spectroscopy (FT‐IR). The size and morphology of nanoparticles were examined by scanning electron microscopy (SEM). The XRD patterns indicate that the intercalation of YGX between the LDH layers has not occurred and surface adsorption has happened. In the adsorption experiments, the Gibbs free energy ΔG0 values, the enthalpy ΔH0, and entropy ΔS0 was determined. The isotherms showed that the adsorption of YGX by Mg‐Fe‐LDH‐NO3 was both consistent with Langmuir and Freundlich equations.