Sushil Kumar Chaturvedi
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Sushil Kumar Chaturvedi has a total of 64 co-authors. Here are the top co-authors by number of shared publications:
- Khela Ram Soren
ICAR-Indian Institute of Pulses Research, Kanpur, India
3 shared publications - Pooran Mal Gaur
International Crops Research Institute for the Semi-Arid Tropics (ICRISAT), Hyderabad, India
3 shared publications - Rajeev Kumar Varshney
WA State Agricultural Biotechnology Centre, Centre for Crop and Food Innovation, Food Futures Institute Murdoch University Murdoch Western Australia Australia
3 shared publications - Abhishek Bohra
ICAR‐Indian Institute of Pulses Research (IIPR) Kanpur Uttar Pradesh India
2 shared publications - Abhishek Rathore
Excellence in Breeding, International Maize and Wheat Improvement Center (CIMMYT), Nairobi, Kenya, Kenya
2 shared publications - Chellapilla Bharadwaj
ICAR-Indian Agricultural Research Institute, New Delhi, India
2 shared publications
Latest Publications
- Open Access
A Multi-Model Based Stability Analysis Employing Multi-Environmental Trials (METs) Data for Discerning Heat Tolerance in Chickpea (Cicer arietinum L.) Landraces
Identifying a congenially targeted production environment and understanding the effects of genotype by environmental interactions on the adaption of chickpea genotypes is essential for achieving an optimal yield stability. Different models like additive main effect and multiplicative interactions (AMMI 1, AMM2), weighted average absolute scores of BLUPs (WAASB), and genotype plus genotype–environment (GGE) interactions were used to understand their suitability in the precise estimation of variance and their interaction. Our experiment used genotypes that represent the West Asia–North Africa (WANA) region. This trial involved two different sowing dates, two distinct seasons, and three different locations, resulting in a total of 12 environments. Genotype IG 5871(G1) showed a lower heat susceptibility index (HSI) across environments under study. The first four interactions principal component axis (IPCA) explain 93.2% of variations with significant genotype–environment interactions. Considering the AMMI stability value (ASV), the genotypes IG5862(G7), IG5861(G6), ILC239(G40), IG6002(G26), and ILC1932(G39), showing ASV scores of 1.66, 1.80, 2.20, 2.60, and 2.84, respectively, were ranked as the most stable and are comparable to the weighted average absolute scores of BLUPs (WAASB) ranking of genotypes. The which–won–where pattern of genotype plus genotype–environment (GGE) interactions suggested that the target environment consists of one mega environment. IG5866(G10), IG5865(G9), IG5884(G14), and IG5862(G7) displayed higher stability, as they were nearer to the origin. The genotypes that exhibited a superior performance in the tested environments can serve as ideal parental lines for heat-stress tolerance breeding programs. The weighted average absolute scores of BLUPs (WAASB) serve as an ideal tool to discern the variations and identify the stable genotype among all methods.
Open AccessA Multi-Model Based Stability Analysis Employing Multi-Environmental Trials (METs) Data for Discerning Heat Tolerance in Chickpea (Cicer arietinum L.) Landraces
Identifying a congenially targeted production environment and understanding the effects of genotype by environmental interactions on the adaption of chickpea genotypes is essential for achieving an optimal yield stability. Different models like additive main effect and multiplicative interactions (AMMI 1, AMM2), weighted average absolute scores of BLUPs (WAASB), and genotype plus genotype–environment (GGE) interactions were used to understand their suitability in the precise estimation of variance and their interaction. Our experiment used genotypes that represent the West Asia–North Africa (WANA) region. This trial involved two different sowing dates, two distinct seasons, and three different locations, resulting in a total of 12 environments. Genotype IG 5871(G1) showed a lower heat susceptibility index (HSI) across environments under study. The first four interactions principal component axis (IPCA) explain 93.2% of variations with significant genotype–environment interactions. Considering the AMMI stability value (ASV), the genotypes IG5862(G7), IG5861(G6), ILC239(G40), IG6002(G26), and ILC1932(G39), showing ASV scores of 1.66, 1.80, 2.20, 2.60, and 2.84, respectively, were ranked as the most stable and are comparable to the weighted average absolute scores of BLUPs (WAASB) ranking of genotypes. The which–won–where pattern of genotype plus genotype–environment (GGE) interactions suggested that the target environment consists of one mega environment. IG5866(G10), IG5865(G9), IG5884(G14), and IG5862(G7) displayed higher stability, as they were nearer to the origin. The genotypes that exhibited a superior performance in the tested environments can serve as ideal parental lines for heat-stress tolerance breeding programs. The weighted average absolute scores of BLUPs (WAASB) serve as an ideal tool to discern the variations and identify the stable genotype among all methods.
- Open Access
- 16 August 2023
- Published by MDPI AG in Preprints.org
Analysis of Heterosis Heterotic Potential Combining Ability and Its Correlation with Grain Yield and Physiological Traits in Bread Wheat (Triticum aestivum L.)
To utilize heterosis and combining ability for grain yield and its attributing traits along with three physiological traits viz., leaf area index, chlorophyll fluorescence and chlorophyll content in bread wheat (Tritium aestivum L.) the crosses were attempted during rabi, 2019-20 in a half diallel mating scheme among 8 wheat varieties and the study was carried out during rabi, 2020-21 at Block No. D-13 field of Mahua block, Simradha research farm, Rani Lakshmi Bai Central Agricultural University, Jhansi. Analysis of variance showed significant differences for treatments. Based on per se performance the hybrids NW 5054 x PBW 723 (23.3 g), and HI 1544 x NIAW 34 (23.14 g), were identified for the higher grain yield. The hybrid HI 544 x NIAW 34 (18.41 %) was identified as the best heterotic cross for grain yield per plant and its component traits. The hybrids HI 1544 x NIAW 34 (3.40) and HI 1544 x GW 322 (2.76), as well as the parents HD 3086 (21.85) and PBW 723 (20.68), were identified as superior economic hybrids and parents based on SCA/GCA effects, per se performance for grain yield per plant, and its component trait in bread wheat. Days to heading, flag leaf length, biological yield per plant, harvest index, number of grains per spike, 1000 grain weight, spike length, leaf area index, chlorophyll fluorescence, and chlorophyll content were all positively correlated with grain yield per plant.
- 16 August 2023
- Published by MDPI AG in Preprints.org
Open AccessAnalysis of Heterosis Heterotic Potential Combining Ability and Its Correlation with Grain Yield and Physiological Traits in Bread Wheat (Triticum aestivum L.)
To utilize heterosis and combining ability for grain yield and its attributing traits along with three physiological traits viz., leaf area index, chlorophyll fluorescence and chlorophyll content in bread wheat (Tritium aestivum L.) the crosses were attempted during rabi, 2019-20 in a half diallel mating scheme among 8 wheat varieties and the study was carried out during rabi, 2020-21 at Block No. D-13 field of Mahua block, Simradha research farm, Rani Lakshmi Bai Central Agricultural University, Jhansi. Analysis of variance showed significant differences for treatments. Based on per se performance the hybrids NW 5054 x PBW 723 (23.3 g), and HI 1544 x NIAW 34 (23.14 g), were identified for the higher grain yield. The hybrid HI 544 x NIAW 34 (18.41 %) was identified as the best heterotic cross for grain yield per plant and its component traits. The hybrids HI 1544 x NIAW 34 (3.40) and HI 1544 x GW 322 (2.76), as well as the parents HD 3086 (21.85) and PBW 723 (20.68), were identified as superior economic hybrids and parents based on SCA/GCA effects, per se performance for grain yield per plant, and its component trait in bread wheat. Days to heading, flag leaf length, biological yield per plant, harvest index, number of grains per spike, 1000 grain weight, spike length, leaf area index, chlorophyll fluorescence, and chlorophyll content were all positively correlated with grain yield per plant.
- Open Access
Evaluation of Global Composite Collection Reveals Agronomically Superior Germplasm Accessions for Chickpea Improvement
The rich genetic diversity existing within exotic, indigenous, and diverse germplasm lays the foundation for the continuous improvement of crop cultivars. The composite collection has been suggested as a gateway to identifying superior germplasm for use in crop improvement programs. Here, a chickpea global composite collection was evaluated at five locations in India over two years for five agronomic traits to identify agronomically superior accessions. The desi, kabuli, and intermediate types of chickpea accessions differed significantly for plant height (PLHT) and 100-seed weight (100 SW). In contrast, the intermediate type differed substantially from kabuli for days to maturity (DM). Several highly significant trait correlations were detected across different locations. The most stable and promising accessions from each of the five locations were prioritised based on their superior performance over the best-performing check cultivar. Accordingly, the selected germplasm accessions of desi type showed up to 176% higher seed yield (SY), 29% lower flowering time, 21% fewer maturity days, 64% increase in PLHT, and 183% larger seeds than the check cultivar JG11 or Annigeri. The prioritised kabuli accessions displayed up to 270% more yield, 13% less flowering time, 8% fewer maturity days, 111% increase in PLHT, and 41% larger seeds over the check cultivar KAK2. While the intermediate type accessions had up to 169% better yield, 1% early flowering, 3% early maturity, 54% taller plants, and 25% bigger seeds over the check cultivar JG 11 or KAK2. These accessions can be utilised in chickpea improvement programs to develop high-yielding, early flowering, short duration, taller, and large-seeded varieties with a broad genetic base.
Open AccessEvaluation of Global Composite Collection Reveals Agronomically Superior Germplasm Accessions for Chickpea Improvement
The rich genetic diversity existing within exotic, indigenous, and diverse germplasm lays the foundation for the continuous improvement of crop cultivars. The composite collection has been suggested as a gateway to identifying superior germplasm for use in crop improvement programs. Here, a chickpea global composite collection was evaluated at five locations in India over two years for five agronomic traits to identify agronomically superior accessions. The desi, kabuli, and intermediate types of chickpea accessions differed significantly for plant height (PLHT) and 100-seed weight (100 SW). In contrast, the intermediate type differed substantially from kabuli for days to maturity (DM). Several highly significant trait correlations were detected across different locations. The most stable and promising accessions from each of the five locations were prioritised based on their superior performance over the best-performing check cultivar. Accordingly, the selected germplasm accessions of desi type showed up to 176% higher seed yield (SY), 29% lower flowering time, 21% fewer maturity days, 64% increase in PLHT, and 183% larger seeds than the check cultivar JG11 or Annigeri. The prioritised kabuli accessions displayed up to 270% more yield, 13% less flowering time, 8% fewer maturity days, 111% increase in PLHT, and 41% larger seeds over the check cultivar KAK2. While the intermediate type accessions had up to 169% better yield, 1% early flowering, 3% early maturity, 54% taller plants, and 25% bigger seeds over the check cultivar JG 11 or KAK2. These accessions can be utilised in chickpea improvement programs to develop high-yielding, early flowering, short duration, taller, and large-seeded varieties with a broad genetic base.
- Open Access
- 25 July 2018
- Published by MDPI AG in International Journal of Molecular Sciences
- Vol. 19 (8) , 2166
Molecular Mapping of QTLs for Heat Tolerance in Chickpea
Chickpea (Cicer arietinum L.), a cool-season legume, is increasingly affected by heat-stress at reproductive stage due to changes in global climatic conditions and cropping systems. Identifying quantitative trait loci (QTLs) for heat tolerance may facilitate breeding for heat tolerant varieties. The present study was aimed at identifying QTLs associated with heat tolerance in chickpea using 292 F8-9 recombinant inbred lines (RILs) developed from the cross ICC 4567 (heat sensitive) × ICC 15614 (heat tolerant). Phenotyping of RILs was undertaken for two heat-stress (late sown) and one non-stress (normal sown) environments. A genetic map spanning 529.11 cM and comprising 271 genotyping by sequencing (GBS) based single nucleotide polymorphism (SNP) markers was constructed. Composite interval mapping (CIM) analysis revealed two consistent genomic regions harbouring four QTLs each on CaLG05 and CaLG06. Four major QTLs for number of filled pods per plot (FPod), total number of seeds per plot (TS), grain yield per plot (GY) and % pod setting (%PodSet), located in the CaLG05 genomic region, were found to have cumulative phenotypic variation of above 50%. Nineteen pairs of epistatic QTLs showed significant epistatic effect, and non-significant QTL × environment interaction effect, except for harvest index (HI) and biomass (BM). A total of 25 putative candidate genes for heat-stress were identified in the two major genomic regions. This is the first report on QTLs for heat-stress response in chickpea. The markers linked to the above mentioned four major QTLs can facilitate marker-assisted breeding for heat tolerance in chickpea.
- 25 July 2018
- Published by MDPI AG in International Journal of Molecular Sciences
- Vol. 19 (8) , 2166
Open AccessMolecular Mapping of QTLs for Heat Tolerance in Chickpea
Chickpea (Cicer arietinum L.), a cool-season legume, is increasingly affected by heat-stress at reproductive stage due to changes in global climatic conditions and cropping systems. Identifying quantitative trait loci (QTLs) for heat tolerance may facilitate breeding for heat tolerant varieties. The present study was aimed at identifying QTLs associated with heat tolerance in chickpea using 292 F8-9 recombinant inbred lines (RILs) developed from the cross ICC 4567 (heat sensitive) × ICC 15614 (heat tolerant). Phenotyping of RILs was undertaken for two heat-stress (late sown) and one non-stress (normal sown) environments. A genetic map spanning 529.11 cM and comprising 271 genotyping by sequencing (GBS) based single nucleotide polymorphism (SNP) markers was constructed. Composite interval mapping (CIM) analysis revealed two consistent genomic regions harbouring four QTLs each on CaLG05 and CaLG06. Four major QTLs for number of filled pods per plot (FPod), total number of seeds per plot (TS), grain yield per plot (GY) and % pod setting (%PodSet), located in the CaLG05 genomic region, were found to have cumulative phenotypic variation of above 50%. Nineteen pairs of epistatic QTLs showed significant epistatic effect, and non-significant QTL × environment interaction effect, except for harvest index (HI) and biomass (BM). A total of 25 putative candidate genes for heat-stress were identified in the two major genomic regions. This is the first report on QTLs for heat-stress response in chickpea. The markers linked to the above mentioned four major QTLs can facilitate marker-assisted breeding for heat tolerance in chickpea.
- 15 September 2016
- Published by Agricultural Research Communication Center in Legume Research - An International Journal
- Vol. 40 (1) , 22-26
Genetic base of Indian chickpea (Cicer arietinum L.) varietiesrevealed by pedigree analysis
In the present study an attempt has been made to determine the genetic base of 138 Indian chickpea varieties through pedigree analysis. The genetic base of 138 varieties can be traced to 160 ancestors utilised to bring genes in development of varieties. Among these, 118 ancestors were used only once or twice. The most frequently used parent included Rabat (37), Pb 7 (36), IP 58 (32), C 1234 (32) and S 26 (27). Rabat and Pb7 are present in the pedigree of more than 26% of varieties followed by C 1234 (23.29%), IP 58 (23.29%) and S 26 (19.57%). Most of the frequently used parents have been used indirectly in the crossing programme. Only 28 parents could represent 50% of total genetic base of chickpea varieties developed in the country. Although conscious efforts have been made to include diverse parents in the chickpea breeding leading to broad genetic base of the varieties yet a huge arsenal of germplasm lines remains unutilised or not resulted in varieties. There is a need to utilise the germplasm resources as well as modern techniques of breeding to incorporate multiple biotic and abiotic stress resistance for yield improvement and stabilization as well as improvement in market driven traits like extra-large seed sized kabuli lines. The present article describes the results of pedigree analyses to determine the genetic base of the released cultivars, reasons for narrow genetic base and possible approaches and strategies for its widening in chickpea.
- 15 September 2016
- Published by Agricultural Research Communication Center in Legume Research - An International Journal
- Vol. 40 (1) , 22-26
Genetic base of Indian chickpea (Cicer arietinum L.) varietiesrevealed by pedigree analysis
In the present study an attempt has been made to determine the genetic base of 138 Indian chickpea varieties through pedigree analysis. The genetic base of 138 varieties can be traced to 160 ancestors utilised to bring genes in development of varieties. Among these, 118 ancestors were used only once or twice. The most frequently used parent included Rabat (37), Pb 7 (36), IP 58 (32), C 1234 (32) and S 26 (27). Rabat and Pb7 are present in the pedigree of more than 26% of varieties followed by C 1234 (23.29%), IP 58 (23.29%) and S 26 (19.57%). Most of the frequently used parents have been used indirectly in the crossing programme. Only 28 parents could represent 50% of total genetic base of chickpea varieties developed in the country. Although conscious efforts have been made to include diverse parents in the chickpea breeding leading to broad genetic base of the varieties yet a huge arsenal of germplasm lines remains unutilised or not resulted in varieties. There is a need to utilise the germplasm resources as well as modern techniques of breeding to incorporate multiple biotic and abiotic stress resistance for yield improvement and stabilization as well as improvement in market driven traits like extra-large seed sized kabuli lines. The present article describes the results of pedigree analyses to determine the genetic base of the released cultivars, reasons for narrow genetic base and possible approaches and strategies for its widening in chickpea.
- 23 January 2016
- Published by Springer Nature
- p. 3-18
Biofortification: Introduction, Approaches, Limitations, and Challenges
- 23 January 2016
- Published by Springer Nature
- p. 3-18
Biofortification: Introduction, Approaches, Limitations, and Challenges
- 30 November 2014
- Published by Springer Nature in National Academy Science Letters
- Vol. 38 (1) , 13-19
Utility of Informative SSR Markers in the Molecular Characterization of Cytoplasmic Genetic Male Sterility-Based Hybrid and its Parents in Pigeonpea
- 30 November 2014
- Published by Springer Nature in National Academy Science Letters
- Vol. 38 (1) , 13-19
Utility of Informative SSR Markers in the Molecular Characterization of Cytoplasmic Genetic Male Sterility-Based Hybrid and its Parents in Pigeonpea
- Open Access
Large Genetic Variability in Chickpea for Tolerance to Herbicides Imazethapyr and Metribuzin
Chickpea (Cicer arietinum L.) is known to be sensitive to many herbicides and, therefore, choices for using post-emergence herbicides for weed control are limited. The present study was aimed at identifying sources of tolerance to two herbicides with different modes of action (imazethapyr—amino acid synthesis inhibitor; and metribuzin—photosynthesis inhibitor) for use in breeding herbicide tolerant cultivars. Screening of 300 diverse chickpea genotypes (278 accessions from the reference set and 22 breeding lines) revealed large genetic variations for tolerance to herbicides imazethapyr and metribuzin. In general, the sensitivity of the genotypes to metribuzin was higher compared to that for imazethapyr. Several genotypes tolerant to metribuzin (ICC 1205, ICC 1164, ICC 1161, ICC 8195, ICC 11498, ICC 9586, ICC 14402 ICC 283) and imazethapyr (ICC 3239, ICC 7867, ICC 1710, ICC 13441, ICC 13461, ICC 13357, ICC 7668, ICC 13187) were identified, based on average herbicide tolerance scores from two experimental locations each. The herbicide tolerant lines identified in this study will be useful resources for development of herbicide tolerant cultivars and for undertaking genetic and physiological studies on herbicide tolerance in chickpea.
Open AccessLarge Genetic Variability in Chickpea for Tolerance to Herbicides Imazethapyr and Metribuzin
Chickpea (Cicer arietinum L.) is known to be sensitive to many herbicides and, therefore, choices for using post-emergence herbicides for weed control are limited. The present study was aimed at identifying sources of tolerance to two herbicides with different modes of action (imazethapyr—amino acid synthesis inhibitor; and metribuzin—photosynthesis inhibitor) for use in breeding herbicide tolerant cultivars. Screening of 300 diverse chickpea genotypes (278 accessions from the reference set and 22 breeding lines) revealed large genetic variations for tolerance to herbicides imazethapyr and metribuzin. In general, the sensitivity of the genotypes to metribuzin was higher compared to that for imazethapyr. Several genotypes tolerant to metribuzin (ICC 1205, ICC 1164, ICC 1161, ICC 8195, ICC 11498, ICC 9586, ICC 14402 ICC 283) and imazethapyr (ICC 3239, ICC 7867, ICC 1710, ICC 13441, ICC 13461, ICC 13357, ICC 7668, ICC 13187) were identified, based on average herbicide tolerance scores from two experimental locations each. The herbicide tolerant lines identified in this study will be useful resources for development of herbicide tolerant cultivars and for undertaking genetic and physiological studies on herbicide tolerance in chickpea.