Dimitrios Bikas

SDG11–Cities and Communities aims to renew and plan cities and other human settlements so that they offer opportunities for all, while improving resource use and reducing environmental impacts. This research examines the regeneration of urban blocks as a means for improving the overall quality of life in Greek cities. The objective of the research is to determine the energy and economic efficiency of four building renovation interventions, including conventional energy upgrading—such as building shell thermal insulation—and more intensive solutions, such as phase change materials, green roofs, and passive solar system integration. The research methodology combines dynamic simulations with Energy Plus simulation software and an economic evaluation of the interventions as well. The results prove that the reduction in energy demand can vary between 55.7% and 59.1% according to the renovation scenario, while the cost of each intervention varies from 73 to 347 EUR/m², proving that the payback period of each scenario largely depends on urban block form. The findings of the research can be useful in defining the most efficient renovation strategies at the urban block scale and to promote urban sustainability.

The increased rates of urbanization and industrialization of the 20th and 21st centuries have dramatically changed the land use and cover of modern cities, contributing to the degradation of the urban microclimate and the rise of the ambient urban air temperatures. Given the multiple negative energy, environmental and social consequences of urban warming, the present paper summarizes the findings of previous studies, assessing the main causes of the phenomenon along with the key investigation methods involving experimental and computational approaches. There follows a description of the most common mitigations, and adaption strategies towards the attenuation of urban warming are described. The analyzed elements include the addition of green spaces such as trees, grass and green roofs; changes on the albedo of the urban surfaces and water-based techniques, as well as a combination of them. The discussion of the reported findings in the existing literature clearly reflects the impact of urban morphology on the outdoor thermal environment, providing also useful information for professionals and urban planners involved at the phase of decision-making.

Considering the nearly zero energy building (nZEB) and the increased measures for the improvement of the energy efficiency, the international literature indicates an extended use of specialized materials and technical installations. An increase in the embodied energy follows that use, with a final share between 74% and 100% in the total life cycle energy of residential nZEBs. The current energy efficiency legislation considers only the impact from the operational phase and ignores the embodied impact from the remaining life cycle phases of the building. Nevertheless, the delegated regulation 244 of 2012 acknowledges the incompleteness of this assessment and provides an optional consideration of the embodied (“grey”) energy. The current study applies this option through the macroeconomic global cost calculations and the cost-optimal levels of nZEBs. The results indicate a limited effect of the embodied impact on the cost-optimal levels and in specific on extended calculation periods and in combination with other key parameters of the sensitivity analysis. An increase in the primary energy and a transposition to variants with lower use of materials and decreased embodied emissions follow this effect. Sensitivity analysis confirms the calculation period as a key parameter and indicates the need for further research.

Nowadays, subjects such as eco-design requirements, product rating or code compliance with regard to energy efficiency are expanding towards a pan-European level. This leads to the necessity of defining zones within the European region, which share common climatic characteristics and will further facilitate the quick estimation of building energy performance. Towards this direction stands the current paper; it presents an approach for defining climatic zones in Europe on the basis of the amount of heating and cooling degree days. It is applied for the climate classification of selected European cities and is compared with the conventional scheme based solely on heating degree days. Since the approach is orientated mainly towards the assessment of building energy performance, its outcomes are evaluated with regard to the actual heating and cooling energy needs of a reference building unit with office use located in representative cities of the proposed climatic zones and facing the four cardinal orientations. The classification of climatic zones on the basis of both heating and cooling degree days leads to more realistic results, since nowadays cooling needs form a substantial part of the energy balance of the building, especially in the Mediterranean regions.