TJTodor Janic

Todor Janic

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Todor Janic has a total of 21 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Analysis of the Correlation between Combustion Products in Biomass Thermal Power Plant Using Association Rule Mining

    by Saša Igić, Dragana Bošković, Barbara Vujkov, Nemanja Igić, Todor Janić, Dalibor Jeličić, Vladica Ristić, Boris Dumnić

    The biomass combustion process is inevitably accompanied by the emission of pollutant gasses. This paper gives a comprehensive analysis of the external variables and combustion products of the biomass plant. The analyzed data were collected from 18 MWt boiler in combined heat and power plant Sremska Mitrovica over a period of four months. The correlations between the recorded data were determined using a unique methodology, which is based on association rule mining. The results of the study can be further used for the reduction of the harmful combustion products, as well as for the optimization of the operation process.


  • Open Access

    Influence of species and forms of biomass on boilers heat power

    by Todor Janić, Vasilije Janić, Saša Igić, Vladimir Višacki

    The paper presents the monitoring and analysis of the influence of the type of combustion of biomass on the thermal power of the boiler plant in the combustion of several types and forms of biomass. The main task in the research was to examine the impact of the suitability for the use of various types of biomass (by origin, shape and size) in the boiler plant, which was designed and constructed for the combustion of biomass (small conventional bale) with manual fuel injection. The following biofuels were used as material: wheat straw bals, maize stems (with leaves), pelleted maize cobs, vineyard bundles in bundles and branches from orchards with a diameter of up to 60 mm. The obtained results can be used to improve the operation of the boiler plant with manual burning (methods and dynamics of combustion and combustion), introduction of automation in the operation of such plants and improvement of their design solutions.

  • Open Access

    Technology and equipment for pelleting of biomass

    by T. Janić, V. Janić

    The paper describes the pelletization equipment and the specificity of certain pelletry constructive solutions, and a special emphasis is given to more important equipment for biomass pelletting, such as presses, dies, pressure rollers, tools and other equipment. Technological requirements that are imposed during pelleting of biomass are also presented. Conditions for the optimal operation of pelleting different types of biomass were studied and gained experience in using additives to improve the properties of pellets obtained. Many years of experience in the development of the biomass pelletization process in Serbia (together with personal experiences) were presented. In the conclusions of work, the direction of further development of this process is given.

  • Open Access

    Thermal power of small scale manually fed boiler

    by T. Janić, S. Igić, N. Dedović, V. Janić

    This study reviews test results of the combustion of prismatic soybean straw bales used as fuel in manually fed boiler with nominal thermal power of 120 kW. The influence of the of the volume flow rate (150, 220, 290, 360 and 430 m 3 h -1 ) of the inlet air and share of the flue gas recirculation (0%, 16.5% and 33%) fed to the boiler furnace was continuously monitored. Direct method was used for determination of the boiler thermal power. Correlation between boiler thermal power and bale residence time was developed and simple empirical correlation has been derived. General conclusions are as follows: the increase of the flow rate of inlet air fed to the boiler furnace has as a consequence decrease of the bale burning time and increase of the boiler thermal power. Share of the flue gas recirculation of 16.5% increases bale residence time and decreases average boiler thermal power in all regimes except in the regime with inlet air flow rate of 220 m 3 h -1 . In regime with 0% flue gas recirculation boiler thermal power was greater than nominal in regimes with 360 and 430 m 3 h -1 inlet air flow rates. In regimes having inlet air mass flow rate of 290 m 3 h -1 boiler thermal power is equal to the nominal power of 120 kW.


  • Wood chips as biofuel

    by T. Janić, N. Tica, V. Zekić

    General trend in the world is using woody biomass for the purpose of generating energy. In an effort to prepare biomass in a form suitable for automatic operation of thermal power plant technology was developed preparing biomass in the form of wood chips. The aim of this paper is to analyze the physical and chemical characteristics of the wood chip production technology of its production, transport, storage and use (supply chain), as well as to show the calculation of its market value. In the existing technology in the preparation of wood chips are adequate solutions for all stakeholders in the so-called fuel chain (harvesting, preparation, transportation, drying, storage and dosing). The total price of wood chips with all the logistics cost is 10.81 RSD/kg, which adopted the euro value of 123 RSD/EUR exchange rate amounts to 87.89 EUR/t. With regard to the case of wood materials of low humidity, calorific value and satisfactory form suitable for automatic operation of thermal power plants listed price of woodchips is the competitive aspect of the market and cost-effective to use for the purpose of generating energy.

  • Open Access

    Efficiency of Small Scale Manually Fed Boilers —Mathematical Models

    by Nebojsa Dedovic, Sasa Igic, Todor Janic, Snezana Matic-Kekic, Ondrej Ponjican, Milan Tomic, Lazar Savin

    This study reviews test results for a biomass-fired hot water boiler with a nominal boiler thermal power of 120 kW. In the experiments, prismatic wheat straw bales were used as biomass. The impact of the quantity (220, 290, 360 and 430 m3 h−1) of inlet air fed to the boiler firebox was continuously monitored. This was to examine the influence of the quantity of inlet air and recirculation (0, 16.5 and 33%) of combustion products on the boiler thermal power and boiler energy efficiency. Thus, the following mathematical models and formulas were presented: correlation between boiler thermal power and bale residence time; bale mass loss during the combustion process; correlation between boiler energy efficiency and bale residence time. Mathematical models were obtained by using experimental data and by applying nonlinear regression analysis. Adjustment evaluation of mathematical models with experimental data was performed based on the determination coefficient, t-test and F-test. Increase the amount of air throughout the firebox produced boiler thermal power increase and bale residence time decrease. It was shown that combustion products recirculation of 16.5% partly improved boiler characteristics, while the recirculation of 33% did not, comparing with the case without recirculation.


  • Open Access

    Assessment of species and quantity of biomass in Serbia and guidelines of usage

    by Miladin Brkic, Todor Janic, Sasa Igic

    The motivation for this study is the disagreement of statistical and literature data about potential quantities of biomass in Serbia. This difference is mainly caused by changed status in practice due to several reasons: changes in ownership caused by transition, different application of technologies in practices, organization of work and economic reasons. The main aim is to precisely establish sorts and amounts of organic biomass in Serbia that can be transformed into heat and electricity. So far, data about the quantities of biomass residues in agriculture, forestry and communal services have been collected and published. Data collection methods are different and generally based on statistical data. The paper explains in detail methods of data collection and processing of crop production, fruit growing and viticulture, livestock, forestry and communal services. On the basis of precise data collection, it has been established that there are 26.3 million tons of biomass residue in Serbia every year. The total amount of biomass is reduced by 20-30% in relation to the period of 10 and more years ago. On the basis of the situation in agriculture and forest production in Serbia, it is estimated that out of the total amount of biomass, some 30-40% can be used for the production of heat energy, electricity and biofuel. The remaining biomass can be used in order to increase soil fertility, as cattle spread, for vegetable production, means for polishing in metal industry, for insulation in civil engineering, in cosmetics industry, production of animal feed, and so on.